Reviews
Since a pure twist is also made into its favorite position, this separate handle is used. Although the end cap is made into plastic specification, it is easy to fall as a problem. It will become difficult to fall if a vinyl tape is also rolled and
Since a pure twist is also made into its favorite position, this separate handle is used.
Although the end cap is made into plastic specification, it is easy to fall as a problem.
It will become difficult to fall if a vinyl tape is also rolled and attached.
Since it is not too bad, it is a three stars.
View detail
Fits: HONDA STEED400, HONDA STEED400 VSE, YAMAHA DRAGSTAR250, SUZUKI BOULEVARDC50(Intruder Classic800/C800)(VL800), SUZUKI Intruder Classic400, KAWASAKI VULCAN800, KAWASAKI VULCAN400II, KAWASAKI VULCAN400, KAWASAKI ELIMINATOR 250V, HONDA MAGNA(V-TWIN MAGNA), HONDA STEED600, HONDA STEED600, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA SHADOW400, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100Classic
It purchased and has equipped in December last year. It was, while the smell to which a plastic will burn in January, this year ran, although a reason was not understood, either but was left as it was, it was a new bulb, but the direction of the down
It purchased and has equipped in December last year.
It was, while the smell to which a plastic will burn in January, this year ran, although a reason was not understood, either but was left as it was, it was a new bulb, but the direction of the down went out.
In order to check, when Wright was opened, a coupler and wiring burned and melted and it was in the charred state.
the manufacturer was asked and insides were exchanged -- it was given.
However, it will enter in September and will be in the same condition.
The coupler was in such a severe state by the half this time that it melts and collapses.
Wright's design itself -- it will be useless.
Wright had better not choose only by a design.
View detail
As the blinker of the shadow was a mandarin orange, it was purchased in order to change an image this time, since it is not felt not much refreshed. It exchanged and was a correct answer. Former and an image change, and it is felt refreshed and is
As the blinker of the shadow was a mandarin orange, it was purchased in order to change an image this time, since it is not felt not much refreshed.
It exchanged and was a correct answer.
Former and an image change, and it is felt refreshed and is popular also from the surroundings.
View detail
In consideration of the bulb gone, it purchased to the stock. Although he noticed after purchase, since I was a clear lens, I was an orange bulb. Since it is unavoidable, it is under examination whether it is used as it is, or it is used for an or
In consideration of the bulb gone, it purchased to the stock.
Although he noticed after purchase, since I was a clear lens, I was an orange bulb.
Since it is unavoidable, it is under examination whether it is used as it is, or it is used for an orange, coloring thinly.
The direction to purchase needs to be warned not only about wattage but about this point.
Foundations Orange lens => Clear bulb Clear lens => Orange bulb Peevish!!
View detail
Since it is cheap and is a duracon system, it purchases for racers for the reason for being strong to a fall. Since the inside diameter was phi 14, when attaching to the handlebar of the inner side phi 16, it inserted in, after making the inside diame
Since it is cheap and is a duracon system, it purchases for racers for the reason for being strong to a fall.
Since the inside diameter was phi 14, when attaching to the handlebar of the inner side phi 16, it inserted in, after making the inside diameter thicker by sealant.
It fitted in very well perfectly.
It seems that it does not separate in the case of a fall, either, since it is smallish.
expect -- and probably, it can use and the good admiration is strong.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR250
Since a pure shift was not pleasing, this product was purchased. Attachment is also very easy and appearance is also individually satisfied with pure one which is said farther of attachment. However, when raising a shift, since it was a rubber if
Since a pure shift was not pleasing, this product was purchased.
Attachment is also very easy and appearance is also individually satisfied with pure one which is said farther of attachment.
However, when raising a shift, since it was a rubber if pure, it did not think it is hard and painful, but since this product is not a rubber, it may feel hardness and painfulness a little.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR400, SUZUKI GSR400, SUZUKI GSR250, HONDA NSR250R, SUZUKI GSX1400, SUZUKI SV1000S, HONDA 400X, HONDA CB1000 SF (Big One), HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB250F, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB400SF, HONDA CB400SF
SUZUKI GSX1400 was equipped. Direction of a return spring was puzzled just for a moment at the time of wearing. Since the volume of a spring is reverse in the right, the left, or either being pure, it does not go into the hole holding the end of a
SUZUKI GSX1400 was equipped.
Direction of a return spring was puzzled just for a moment at the time of wearing.
Since the volume of a spring is reverse in the right, the left, or either being pure, it does not go into the hole holding the end of a spring well.
However, even if it does not enter, since maintenance is possible, it is satisfactory at all on actual use.
Attachment was completed in about 10 minutes.
Although the step of silver was attached, it is glossy and appearance is racy perfectly.
If it actually rides, a notch grips in shoes, and does not slide even on a rainy day, but is comfortable.
With the thing without a bank sensor, since the angle of bank slit upwards aslant, it became deeper than normal.
Instead, since the overall length of a step is slightly short, the shoes point grounds with THE.
It is large satisfaction synthetically.
However, it is an one star minus regarding direction of a spring.
View detail
This stay was purchased with a 50-cm sissy bar. However, when inserting Bar in stay, although it did not understand whether it was a design mistake in the mistake of the manufacturing process, it could not insert in the smooth but suffered troubles.
This stay was purchased with a 50-cm sissy bar.
However, when inserting Bar in stay, although it did not understand whether it was a design mistake in the mistake of the manufacturing process, it could not insert in the smooth but suffered troubles.
Furthermore, I was sorry for weld to already have rust a little.
However, since appearance is quite satisfactory, it is three stars.
View detail
Having equipped with the blinker kit of a four-piece set, it falls. One blinker is damaged. rebuying a four-piece set piled -- if you think what it would be absent and would do, there is setting out of only a blinker -- peace of mind. Kana whi
Having equipped with the blinker kit of a four-piece set, it falls.
One blinker is damaged.
rebuying a four-piece set piled -- if you think what it would be absent and would do, there is setting out of only a blinker -- peace of mind.
Kana which can be used when (?) fall is carried out next time although it is excessive one piece since it is a two-piece set.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA400, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, SUZUKI INAZUMA1200(GSX1200FS)
It attached to HONDA CB400SB'09. Although it was in description of item even with '08, it has equipped satisfactorily. OK is glad for cables to come out as it is. Although attachment was easy, 10 mm of 6 angle wrench is required for it. Wh
It attached to HONDA CB400SB'09.
Although it was in description of item even with '08, it has equipped satisfactorily.
OK is glad for cables to come out as it is.
Although attachment was easy, 10 mm of 6 angle wrench is required for it.
When it straddles instantly and a handle is grabbed, it is very much good touch.
If normal, there was trunk touch that the waist became painful for a while for anteversion, and power was tired of going into an arm, but the position after wearing became very easy.
When it is this, long-distance touring is also OK!! Going out is pleasure.
View detail
If it attaches in the location which raises a handle with all its might, when a full lock is surely carried out, a hand will be caught between a handle and a tank. However, it will be set to the hardly worried level if it attaches to the location lowe
If it attaches in the location which raises a handle with all its might, when a full lock is surely carried out, a hand will be caught between a handle and a tank.
However, it will be set to the hardly worried level if it attaches to the location lowered for a while.
It became quite easy when compared with the normal handle also in the state.
Also when running a peak, do I feel that it becomes easy to run compared with normal?
I think that this hit is based on how to ride (^_^; I hear that attachment requires a hang just for a moment, and they are four stars.
View detail
It attached and was overly easy. When it compared that it was pure, it became the touch felt refreshed and became smart (^-^) As itself, it is satisfactory. Certainly [ since it rusted when it let it alone, way it made maintenance brisk ]!
It attached and was overly easy.
When it compared that it was pure, it became the touch felt refreshed and became smart (^-^) As itself, it is satisfactory.
Certainly [ since it rusted when it let it alone, way it made maintenance brisk ]!
View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR
When it was a handle of normal, a wrist and the waist became painful easily, and since he wanted to have sat down further calmly and to ride, it purchased. As for the result, inclined attitudes returned and most burdens on a wrist and the waist were l
When it was a handle of normal, a wrist and the waist became painful easily, and since he wanted to have sat down further calmly and to ride, it purchased.
As for the result, inclined attitudes returned and most burdens on a wrist and the waist were lost.
Furthermore, since a brake hose calls it a mesh, admiration also comes out custom, and if a brace bar is attached according to the color of a motorcycle, I will think that he is still smarter.
Incidentally ... w which was the sure almost same position when it ranked with a police motorcycle by the waiting for a signal
View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA HORNET600, HONDA HORNET250, HONDA ZOOMERX, HONDA JADE, HONDA glom, HONDA glom, HONDA X4, HONDA X4, HONDA X11, HONDA VTR250, HONDA VTR1000FVTR1000F FIRESTORM, HONDA VTR TypeLD, HONDA VFR800, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA GB250 CLUBMAN
It attached to CB1300SF. Appearance changed gaily. The crevice between a handlebar and a stainless nut was almost lost. When attaching stay, such as navigation, to a handlebar, I consider that it is better to take care.
It attached to CB1300SF.
Appearance changed gaily.
The crevice between a handlebar and a stainless nut was almost lost.
When attaching stay, such as navigation, to a handlebar, I consider that it is better to take care.
View detail
Fits: SUZUKI VOLTY, SUZUKI GSX750 KATANA, SUZUKI GSX750E, SUZUKI GSX250S KATANA, HONDA FT500, HONDA FT400
It is used for GSX250S katana. It becomes the exchange from an authentic positive one. Appearance became good. Since the handle brace is not attached, numbness comes to a hand. Since an angle etc. are changed, it can arrange to oneself lik
It is used for GSX250S katana.
It becomes the exchange from an authentic positive one.
Appearance became good.
Since the handle brace is not attached, numbness comes to a hand.
Since an angle etc. are changed, it can arrange to oneself liking.
View detail
Attachment is very easy. Since it hardly rides back, the comment at the time of a tandem is not made, but since it becomes a support and also becomes a hook when a feeling of an appearance volume carries increase and a load, it attaches, and I think t
Attachment is very easy.
Since it hardly rides back, the comment at the time of a tandem is not made, but since it becomes a support and also becomes a hook when a feeling of an appearance volume carries increase and a load, it attaches, and I think that it was good.
Since it became [ of a sheet ] difficult to be locked after attachment, evaluation 4 was used.
View detail
Fits: KAWASAKI Z125 Pro, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, HONDA FORZA(MF08), HONDA FORZA Z ABS, HONDA FAZE Type S, HONDA FAZE, HONDA PS250, HONDA glom, HONDA PCX150, HONDA PCX125
As a dress-up up, it is good. They are those with impact, and the highest at appearance!
As a dress-up up, it is good.
They are those with impact, and the highest at appearance!
View detail
Fits: YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250)
The balance regarded the virago with a part with a small car body and Wright being about 4.5 as --. Although the result exchanged with the blinker became satisfying, the size of a meter and the place of wiring have been shortly worrisome. Although
The balance regarded the virago with a part with a small car body and Wright being about 4.5 as --.
Although the result exchanged with the blinker became satisfying, the size of a meter and the place of wiring have been shortly worrisome.
Although it thinks that the brightness of Wright itself is satisfactory, the cheapness of a bolt nut will carry out considering the texture of stay with four stars by minus.
View detail
Fits: YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250)
He thought that he would change a headlight into a bates type, and it carried out simultaneous exchange also of the blinker. It comes to a time-tested brett and an emergency exactly after all. It was not a mistake, although the headlight was as 4.
He thought that he would change a headlight into a bates type, and it carried out simultaneous exchange also of the blinker.
It comes to a time-tested brett and an emergency exactly after all.
It was not a mistake, although the headlight was as 4.5 inches and made it the arm mini.
Since wiring also added the hand this time, time was taken, but if it is only exchange, it is KASUTEMU made very simply.
View detail
It changes into a grip heater from a sponge grip, and purchases for appearance Kougami of the circumference of a handle. Appearance became very good. However, since an axel stops returning if it does not take care about past [ of a screw / a bundl
It changes into a grip heater from a sponge grip, and purchases for appearance Kougami of the circumference of a handle.
Appearance became very good.
However, since an axel stops returning if it does not take care about past [ of a screw / a bundle ] at the time of attachment, cautions are required.
View detail