Reviews
In an arai's tour cross, it is hard to use. Lusterless black paint also comes off immediately. Even if a price goes up a little, when a holder part is returned, he wishes coating of the mechanism which acts as Locke automatically, or the portion w
In an arai's tour cross, it is hard to use.
Lusterless black paint also comes off immediately.
Even if a price goes up a little, when a holder part is returned, he wishes coating of the mechanism which acts as Locke automatically, or the portion which is likely to come off.
View detail
If a side bag is attached, it becomes impossible to use, although the helmet lock is attached to the eliminator from the first. It purchased and attached by the reason for saying. I think that it is a place with quite strong sufficient one as a Go
If a side bag is attached, it becomes impossible to use, although the helmet lock is attached to the eliminator from the first.
It purchased and attached by the reason for saying.
I think that it is a place with quite strong sufficient one as a Good point.
Since it is plating, he is smart.
However, in a Bad place, - Locke must turn and be going to just act, also when carrying out as Locke of the key.
- Once it attaches using an attached screw, it becomes impossible to take.
(Although a crime prevention top is a good thing, change of a fixing position, etc. become impossible) - it is somewhat large -- the impression of being was received.
I think that it can make a little smaller.
Although he wanted to attach to a sissy bar, it did not suit in the thickness of the sissy bar.
since -- thickness was adjusted and attached with the elastic band.
It is if it is touch also with a little thinner OK one... Evaluation is a two stars from the above.
View detail
Since the helmet holder is not attached to F650GS (TWIN), it purchases. This product was purchased in order to unite with a black frame. But it is hard to use that it must turn and act as Locke of the key also when acting as Locke just for a momen
Since the helmet holder is not attached to F650GS (TWIN), it purchases.
This product was purchased in order to unite with a black frame.
But it is hard to use that it must turn and act as Locke of the key also when acting as Locke just for a moment.
View detail
Although it is a special low back type, the main part itself is fairly large because of the holder of a dripproof function. Moreover, although this is also for a dripproof function, since the cord is being fixed, it is impossible to tie a cord to remo
Although it is a special low back type, the main part itself is fairly large because of the holder of a dripproof function.
Moreover, although this is also for a dripproof function, since the cord is being fixed, it is impossible to tie a cord to remove and connect parts with and directly.
After all, the advantage of a low back type cannot fully be efficiently employed in the size of a main part and a connection part.
View detail
Since he wanted to attach desorption type rear BOX to FTR223 of '02 model purchased in medieval times, inevitably, the rear carrier was needed and purchased. Since BOX is required for commuting, a choinori, shopping, etc. well ... Although rear ca
Since he wanted to attach desorption type rear BOX to FTR223 of '02 model purchased in medieval times, inevitably, the rear carrier was needed and purchased.
Since BOX is required for commuting, a choinori, shopping, etc. well ...
Although rear carrier reinforcement and the structure of the comment to attach itself were satisfactory, and the four-place bolt fixation (it puts between a pure bolt) under a sheet went to the smooth, time was taken in the bolt fixation beside a sheet.
Although the fine adjustment & work was dealt with well and wearing was completed, it becomes a mental state which does not want to remove a sheet from now on.
But since the tandem bar is also attached, does this carrier also have a good place?
The hook portion of a carrier about which the direction of others has told seems for the problem which contacts a rear blinker by vibration etc. to be satisfactory for the moment.
View detail
Although the standard radiator reserve tank of KLX is attached to back left-hand side SHIERAUDO, the center of gravity is used in order to bring to the engine forward left, since he would like to bring to a center. Although neither a size nor a form i
Although the standard radiator reserve tank of KLX is attached to back left-hand side SHIERAUDO, the center of gravity is used in order to bring to the engine forward left, since he would like to bring to a center.
Although neither a size nor a form is bad, it is a place where it is not quite satisfactory that the rubber of a cap deteriorates immediately and breaks.
View detail
He wanted to change the image of RIA and it purchased. It can attach without carrying out big processing. However, since it is an electric lamp, it goes out some day. Moreover, since electric lamps cannot be exchanged if it decomposes, in exch
He wanted to change the image of RIA and it purchased.
It can attach without carrying out big processing.
However, since it is an electric lamp, it goes out some day.
Moreover, since electric lamps cannot be exchanged if it decomposes, in exchanging, is the device of incorporating LED needed?
Regrettable, because he thinks that it becomes the touch which an LED inclusion option kit should just have by this model.
View detail
A blinker change is made and it purchases as a measure against a high flasher. Attachment changes blink speed in engineon/off of a simple thing. Although it blinks at a moderate speed, by engineon, 96 times, with a part for /, it is early at the t
A blinker change is made and it purchases as a measure against a high flasher.
Attachment changes blink speed in engineon/off of a simple thing.
Although it blinks at a moderate speed, by engineon, 96 times, with a part for /, it is early at the time of engineoff, and it blinks.
It is a two stars in saying.
(Whether a variable speed thing is purchased and under examination)
View detail
Although it is in other impression, since it will flow backwards if it pours in continuously, it is necessary to pour in gradually. Since it still flows backwards somewhat from the wire side, if something closes the wire side (it gathers with a finger
Although it is in other impression, since it will flow backwards if it pours in continuously, it is necessary to pour in gradually.
Since it still flows backwards somewhat from the wire side, if something closes the wire side (it gathers with a finger or is a knob with previous thin pliers) and it is poured in, it is in good condition.
Although there was an attached adapters for phi1 metallic nozzles (product made of resin), an inside diameter was not able to insert the metallic nozzle of phi 1 at all small.
The tube of the inside diameter phi 1 was purchased and used in the home center.
It was in good condition.
If there is nothing well, it will be troubled, but user-friendliness is unsatisfactory.
View detail
Though it was regrettable, a size did not suit a super sherpa. (It is slightly long) Although still attached, a gripping feeling (smile) is the touch which may be solid. It is merely somewhat thin. But a price is cheap and unavoidable. I t
Though it was regrettable, a size did not suit a super sherpa.
(It is slightly long) Although still attached, a gripping feeling (smile) is the touch which may be solid.
It is merely somewhat thin.
But a price is cheap and unavoidable.
I think that I will use a little in between.
Should a size suit to recommend!!!
View detail
It attached to SR400. From attachment, although a photograph is a thing for eight months, it is transforming the part now. Is it related although it is a pure softer raw material? Boots do not fit Faulk again as a photograph. The boots are mor
It attached to SR400.
From attachment, although a photograph is a thing for eight months, it is transforming the part now.
Is it related although it is a pure softer raw material? Boots do not fit Faulk again as a photograph.
The boots are more delicately [ than an outer tube ] larger, and the level difference is made.
Although fixation is an attached cable tie, it is not awesome as a photograph.
It is not the metal in an article image but a product made from a plastic.
There are few stages of bellows more thickly pure.
Quality is ? although it is cheap.
View detail
Fits: HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH883
Since the back became painful when long distance length distance ran just for a moment when normal, the handle of 883 was exchanged. Work is easy and cables are settled finely. Appearance of texture is also well more beautiful than normal. It
Since the back became painful when long distance length distance ran just for a moment when normal, the handle of 883 was exchanged.
Work is easy and cables are settled finely.
Appearance of texture is also well more beautiful than normal.
It seems that however, it is too close to 170-cm me, and between normal is the best.
An overload is applied to the opposite side waist to which the upper half of the body became easy too much, and the waist is becoming somewhat painful shortly.
View detail
When using the power sockets (one hole) of an emon, this product was used as a little waterproof cover with protection. It is satisfied with the socket and the just size in a user friendly manner. However, a thing with a high price is regrettable.
When using the power sockets (one hole) of an emon, this product was used as a little waterproof cover with protection.
It is satisfied with the socket and the just size in a user friendly manner.
However, a thing with a high price is regrettable.
View detail
As a cable tie to show, it is good. There is a high grade feeling. However, a price is past quantity. I think the goods which should not just care about a price.
As a cable tie to show, it is good.
There is a high grade feeling.
However, a price is past quantity.
I think the goods which should not just care about a price.
View detail
It attached to SR400 of 97 models. Since the age of SR400 is not writing to the adaptation vehicle type of description of item, probably they will be all the model correspondences. The attached result thought SR adaptation article or ? [ result ]
It attached to SR400 of 97 models.
Since the age of SR400 is not writing to the adaptation vehicle type of description of item, probably they will be all the model correspondences.
The attached result thought SR adaptation article or ? [ result ] with it being true.
The path of boots is larger than Faulk and becomes baggy.
Moreover, by the picture of HP, it is reflected as if the metal band was attached, but the binding band of PURA follows in practice.
Although it fixes to Faulk now, since the path does not suit, wrinkles come together a little, and there is admiration forcibly.
Since it is below the half the price of pure boots, there is price merit, but it is quite inaccurate.
Texture is good.
.
.
Probably, it will be better to purchase an original manufacturer's product, if it can do since a pure locking device cannot be used, either.
View detail
Although it was felt as the powerful filter with the magneto + network, when it often sees, meshes of a net are DEKAI! Even if the iron system can adsorb magnetically, with this net, it is likely to let fine garbage other than iron pass. It is whether
Although it was felt as the powerful filter with the magneto + network, when it often sees, meshes of a net are DEKAI! Even if the iron system can adsorb magnetically, with this net, it is likely to let fine garbage other than iron pass.
It is whether although the thing which is a compact is better than other brand items, the paper filter of a nervous person is better.
Well, it is a Massey kana ? grade rather than there is nothing.
View detail
It is thinner than seeing with a photograph much. The rubber of the portion to grasp is dramatically thin, and a hand will be numbed with the feeling which grabs the handle directly in the case of a run [ long distances, such as touring, ], and he wil
It is thinner than seeing with a photograph much.
The rubber of the portion to grasp is dramatically thin, and a hand will be numbed with the feeling which grabs the handle directly in the case of a run [ long distances, such as touring, ], and he will get tired with it at it.
View detail
A clutch wire goes out, and since it is year ends and New Year holidays, brand-name parts cannot be ordered. Then, although this got, if there is no margin in the wire from an outer, it cannot tie as it is. Slight metal of an outer and inside whic
A clutch wire goes out, and since it is year ends and New Year holidays, brand-name parts cannot be ordered.
Then, although this got, if there is no margin in the wire from an outer, it cannot tie as it is.
Slight metal of an outer and inside which is carrying out the round and round was cut, the die length of the wire was secured, and it changed into the state where it can use somehow.
Since this processing is impossible on the spot, if the wire itself has a margin, they will be very secure items.
View detail