Reviews
Not good
It might be a little hard to see and I don't like it. View detail
Even though it's only for car models ….
I purchased it specifically for my car model, but could not install it without modifications. View detail
Durability may be difficult.
The ease of installation was a plus.
The battery stopped charging less than six months after installation.
According to Manufacturer, it was due to age and not covered by warranty.
I hoped it would be a little sturdier and last longer.
View detail
… Failure.
It is not attached to the '23 model because of a model type mistake.
I gave it to a friend.
View detail
It was worth the price.
I was a little disappointed because it was an Image that glowed a little brighter.
Well, I can barely see Meter, so I'm going to use it as is for now.
View detail
No functional problems, but ….
No functional problems, but the paint started cracking and peeling about a year after installation. There is a problem with the quality of the paint or the painting method. View detail
I bought it to install it, but I couldn't.
[How is it used?
I bought it for the Rear Mud Splash, but unfortunately it didn't work.
Was the one you received as per Image?
Image was great, but I made a mistake and I just couldn't get it installed.
How was your experience with it?
Installation could not be done
I made the mistake of buying it.
[Points to note]
It is a good product, but could not be installed on the HUNTER due to the shape of the Rear Fender.
Of course, I tried to see if I could install it on the Front, but it was still impossible.
How did it compare to other products?
No comparison.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I think the person who purchases it can install it on other models.
(As a precaution.)
I was wondering if the CT110 HUNTER CUB needs to be Rear Fender processed on the day of the product itself.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Processing is necessary for installation
The bolt that came with the kit did not fit the screw holes, so I extended the holes in the bracket with a drill to M7, but could not install the bolt.
I installed it with an OEM bolt and it fits the screw hole. (I think the upper side of the OEMBolt was thicker, so it fit better and had a Screw hole.)
I put it at 2 because it needed processing even though it was an exclusive product.
2019 CB400SB (2BL-NC42) is
View detail
It was too tight.
At 172cm and 78kg, the upper body was relatively comfortable, but the lower body was tight. As the Instruction Manual says, it is better for shorter people.
The lower half of the body is also considered to be Fit. I felt that the seat surface is narrower than the Normal seat.
View detail
Fits: YAMAHA BOLT R, YAMAHA BOLT, HONDA REBEL1100, HONDA REBEL250, HONDA REBEL250 ABS, HONDA REBEL500, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC, HONDA Rebel300
If you're not careful, you can dent the Tank.
When the handlebar is pushed all the way to the Right in the open position, it contacts the tank.
I got a dent in my Tank with it.
I removed it because it would have been disastrous if I had inadvertently left it unlocked, although it would have been better if I had not left it unlocked.
View detail
Parenthesis is good, but ….
I can't see behind me because it picks up vibration and blurs the image…. View detail
Design is Cool but
Normal mirror was available from Handlebar, so I installed it to make it easier to slip through, but the vibration absorption was so weak and shaky that it was hard to see, so I went back to Normal (tears). View detail
Fits: HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883
Fairly subtle.
Worn on Harley XL1200C SPORTSTER 1200 xl1200cx
Frankly, it's better than nothing,
Level.
First, the position is low.
I think a higher position would work if it could be done.
In addition, the position of the notch where the Engine is fixed is not aligned.
The FrontEngine side is not firmly fitted and is shallow.
Coating is solid and non-slip.
For these reasons, the value of buying
View detail
Required processing
The one-touch made it easy to attach and detach the Belt, but the part where the Belt passes through is too narrow and the Button attached to the Belt does not pass through. View detail
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH StreetTwin, TRIUMPH SCRAMBLER
Grab Rail does not install well if present.
I purchased this for Bon Shrimp Le T100.
The screws for fixing the Grab Rail are not properly inserted because the angle 1 is not adjusted properly when I tried to install it according to the Instruction Manual, and the Large size is not correct when I tried to install it on the Grab Rail side.
In order to attach it to the Grab Rail, a layer of protective Tape would need to be attached, and I am looking into the availability of Tape.
Please let me know if there is a better way to install something.
View detail
Film." Or rather Seal." impression
Since it is labeled "Film," I thought it was supposed to be applied with water, but it is a type that can be cut and applied as is.
Personally, that kind of thing was Image of Seal, not Film.
Because it is not designed to be applied with water, it is difficult for amateurs to apply it to a large area or complicated shape or part without air contamination.
I tried applying the film with water, but it was very difficult to push water out of the film due to the nature of the film, which is not designed to do so (the water stuck in the middle of the film).
Perhaps it is a product that is supposed to be applied to flat surfaces with a pinpoint large size.
View detail
CB250 Fuel Hose replacement
I replaced the clear hose with this black hose on my Cb250 Export, but the hose clip is too loose and I can't use it. View detail
Even with the lights on, the car will still hit you regardless.
I installed a DriveRecorder.
I was looking for something to put on a staker and found this product.
Stickers, once applied and removed, leave tanning marks or glue, or they naturally flip off.
Plate can be removed without leaving any scratches or stains.
[Thoughts
Cars that are going to hit you will hit you regardless of whether you have the lights on or not.
Probably a driver of such intellectual Level that he can't even read the Alpha bet.
So, translation (it might be better if you type it here!)
The License Plate Light is visible at night thanks to the License Plate Light (the Camera on the DVR is not visible).
It's just for decoration.
The car that runs into the Motorcycle is probably not even aware that the Motorcycle is in front of it in the first place, so it's not a good idea to be on the lookout for it. (Lol)
I don't blame Minus stars for saying this, but I feel the price is too expensive for the product.
Well, it's not a product that can be sold in large numbers, so it's no wonder it's so expensive.
View detail
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
There is a cooling effect.
It has a cooling effect, but the oil temperature of this Engine itself is about 20 degrees Celsius outside.
About 60 degrees Celsius with just enough run to flush.
Even after 30 minutes of continuous operation at 8000 rpm in 2nd gear, the temperature is still 80°C and the original is Over cool.
I have reverted to NORMAL.
Cylinder is also OEM and Heat sink is in design.
Basically, I felt that it was better not to do anything that would cool down the Engine.
View detail
Balance of quality and price...
[How is it used?
My friend's younger brother bought a new SEROW250Final edition without a rear carrier. "Let's go buy the parts we want to install!" I went to the Motorcycle Accessories store where I went and bought this Rear Carrier because it was the only one they had in stock.
Was the one you received as per Image?
In hindsight, I could have chosen many things including design etc. if I had chosen at Webike... or rather, my friend and I did. You might as well pick one from Webike's or mail order, right?" I advised him to do so. I want to buy the parts I want and install them right away." and Tension seemed to be higher. I'd rather buy something now than wait a little." I was forced to do it like that.
Rear Carrier functional parts are working fine.
Was the installation difficult?
As mentioned in others' Reviews. Can be used with OEM Assist Grip. In reality, however, the clearance between the Assist Grip and the Carrier Bracket is too narrow to allow for easy access, so modification is required.
In this sense, it is difficult to install, but if you give up the Assist Grip installation, the difficulty will be reduced (the bolt length is also included in the package and is large and strong).
How was your experience with it?
As mentioned above, there is no problem with the functional part as a Rear Carrier, and the box can be installed.
but the Design is It's like a sturdier version of Carrier for Motorcycle." I'm too plain with my...
Moreover, the Gold amount is not one of the cheapest, and to tell you the truth. If I was willing to pay this amount of Gold, I would choose a Carrier from another company with better parenthesis. It's like
[Included Parts:were they on?
The CarrierBody, collar and bolt necessary for installation are included in the package, so if you do not use the Assist Grip, you can install the CarrierBody with this product alone. (If you use the Assist Grip, you will need a collar of appropriate thickness and a longer bolt to accommodate the additional thickness.)
[Was there anything that disappointed you?
Price and Design・・・・It is hard to say how much people like the look of the product, but I think the position of the Assist Grip, which makes it difficult to use if it is attached as it is, is not well thought out for a product that costs this much in gold.
Other items that would be helpful
Point and hang of installation
If the base for the box is to be installed from the beginning, it is better to install the base on the carrier before installing the rear carrier on the car body, so that the work can be done smoothly.
[Availability and clarity of the Instruction Manual
It is an easy-to-understand product.
[Notes]
As I have already mentioned above, there are some points to note when installing the OEMAssist Grip and the Bolt mounting holes are slightly gapped (individual difference range?). It is safer to do a temporary assembly in advance.
[ITEMS TO BUY TOGETHER
If you plan to install the Rear box, it is easier to purchase it together and install the Base first.
[Opinions and requests to Manufacturer
It would be helpful if you could improve the accuracy of the product... or lower the price.
View detail