Reviews
It's disappointing.
It came in a color not in the picture. I wanted a gold color, but it was orange. Metal is weak. One is the wrong length.It came in a color not in the picture. I wanted a gold color, but it was orange. Metal is weak. One is the wrong length.It came in a color not in the picture. I wanted a gold color, but it was orange. Metal is weak. One is the wrong length. View detail
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR, KAWASAKI Z750 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200, KAWASAKI ZZR1200
Mount Screw
I was looking for a black Titanium, but I couldn't find a good one, so I chose this one. I tightened the bolt lightly by hand until it stopped, but when I looked closely, I found that the screw at the tip of the bolt had been crushed. I thought there was a problem with the Bolt, because the other Bolts I had went in without any problem. It is a waste of money, but I am afraid to use a tool to tighten it, so I will look for another one. View detail
? I was so scared.
I degreased the sticking surface cleanly and stuck it on, but it peeled off beautifully.
The rest will peel off no matter how many times it is pasted.
I'm sorry
View detail
Fits: SUZUKI GSX1300R HAYABUSA
Tank Shop
Crystal in Bolt is in the way and hard to tighten. View detail
Cool. But …
I bought this Clutch lever and Brake lever because I thought Carbon parts are very cool.
It is Custom only in appearance. Functionality especially.
good point
It is cheaper than OEMLever and has a better design.
Carbon creates an atmosphere of something special.
Of course, it's pimped out.
A bad point
The carbon deteriorates quickly and becomes tattered.
Carbon is a material used to reduce weight, but it has no particular effect here.
I ended up switching back to OEMLever.
And if you polish it up with PIKAL, it's Polished!
This is one of the experiences that I failed to replace just because of the appearance and without thinking about later.
View detail
Fits: HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CB400SB, HONDA CB400SF, HONDA CBR900RR, HONDA CBR600F4, HONDA CBR1100XX, HONDA CB1300SF, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA CB1300SB, HONDA CB1300ST
Does the color fade easily?
2800 yen for 7 screws is rather expensive, but the quality is not bad.
I'm afraid that the anodized finish might come off if I tighten the screws too hard.
If Carbon Seat etc. is attached to the tank cap, it may not be able to be installed without peeling it off.
(Due to the gap between the hole and Seat)
In addition, there is a feeling that the color is fading, and for the price ・・・・.
I found it quite satisfying when I just put it on. ・・・・
View detail
Fits: HONDA PCX125, HONDA PCX150
No effect.
I bought it 3 years ago (the product number at that time was MV112B, priced at 2,700 yen) and installed it.
It looked dark when it was installed, but it became even darker with age.
The Right one came off immediately, but the Left one was difficult to remove.
Only the surface sheet was removed and a clean surface came out.
Did you put it up wrong? So I looked it up. "Finally, peel off the surface Seat. There was no explanation for this.
I liked the look of it when I first put it up.
Be careful when you install it, because the visibility will be bad after 3 years.
When I peeled off the glass, there were still some glues on the Mirror, but they could be easily removed by glass cleaner.
View detail
Fits: HONDA CB400 SF, HONDA CB400 SF VERSION R, HONDA CB400 SF V-TEC
It's too unfriendly
I bought the Red, and it has detailed instructions on where to install the Bolt, etc It wasn't
In addition, while comparing with the existing Bolt, 1 pc at a time, I replaced it, but 1 pc inevitably The size did not fit
View detail
Inexpensively
As a Joint, I used it as a Joint, well satisfied, after driving, Body is also getting hot and it seems to have dissipated as it is, but it was not such thing as reflected in the water temperature gauge it was high. View detail
Fits: SUZUKI GLADIUS 400, SUZUKI GLADIUS 650
Not for GLADIUS 650400.
I purchased thought that this price is cheap with 27 bottles..
The color selected Gold. The color is fairly modest.
When we compare weight with OEMBolt, it is light enough to feel uneasy about strength.
The only regret is that this product is exclusively for GLADIUS 650650.
It is not for 400 (It is only listed as GLADIUS 650650 in the product box)
The number actually used for GLADIUS 650400 is only 11 pc of Crankcase Cover.
Water Pump Cover's Bolt was not able to use this product for a short time.
I'd like to use it for Motorcycle Left Side, but 400 does not try it because it has Cover.
You can only attach the surplus Bolt to a place where you can use it somewhere.
View detail
Fits: HONDA CB1300SB
I just pasted it because this is exclusive product for a specific model. It was difficult to push out air bubbles completely because the size is just the same size as the mirror.I cut the whole a bit and put it on.This enabled air bubbles to c
I just pasted it because this is exclusive product for a specific model. It was difficult to push out air bubbles completely because the size is just the same size as the mirror.
I cut the whole a bit and put it on.
This enabled air bubbles to come out easily but some still remained.
The color is deeper than I expected and it looks a bit darker.
I rode in rain; the mirror neither had a clear view nor an unclear view.
I don't see in case of night because I don't run at night.
View detail
Fits: KAWASAKI NINJA 250 R, KAWASAKI NINJA 250 SL, KAWASAKI Z250, KAWASAKI NINJA 250 SL, KAWASAKI Z250
it attaches, and passes through the days and months for two years, and the Metallic red which was beautiful those days has also become a thin Pink (a smile -- -- slightly regrettable only to a by no means cheap Parts.) In a cheap general-p
it attaches, and passes through the days and months for two years, and the Metallic red which was beautiful those days has also become a thin Pink (a smile --
-- slightly regrettable only to a by no means cheap Parts.)
In a cheap general-purpose Cap bolt and this, it is unchanging.
View detail
He thought that he would stick on the tank of YZF-R6, and it purchased. However, as for a little curved surface, an angle floats and air also enters easily. If there is a crevice, a clear thing will serve as an enmity, and I think that it will loo
He thought that he would stick on the tank of YZF-R6, and it purchased.
However, as for a little curved surface, an angle floats and air also enters easily.
If there is a crevice, a clear thing will serve as an enmity, and I think that it will look dirtily that garbage etc. tend to adsorb.
I consider that it is better not to use except a flat face.
View detail