Reviews
Fits: HONDA CBF600S, HONDA CBF600S, HONDA CBF600S, HONDA CBF600S, HONDA CBF600S, HONDA CBF600S, HONDA CB400SF, HONDA CBF600S, HONDA CB600F, HONDA CBF600S, HONDA CB400SB, HONDA CB1000R, HONDA NT700V DOUVILLE, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB1000R, HONDA CB1000R
high!
How to use TanClockBack
You must purchase it
By vehicle type, Included Parts : Where I want you to
What you can not do is by car type
Back itself is cheaper than other shops
I think that it is sold
Total good shopping
was.
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
I bought it and it was broken on that day.
It has passed since I bought this item, but it breaks easily, so I will imprint it.
First Left Side, I got cracked from the base on the way back on that day I attached.
About one year after welding and repairing, Right is similarly damaged from the end of welding.
The thickness of Plate is 4 mm, but there is no place for shock to escape, and if it is attached to SR, measures to release vibration shock may be necessary.
View detail
![CAM Pannier Holder [PL6401CAM]](https://global.webike-cdn.net/photo/article/33/1439738352833L.jpg)
Fits: TRIUMPH TIGER800, TRIUMPH Tiger800XC, TRIUMPH Tiger800XC, TRIUMPH Tiger800XR
Truly making GIVI
Although it is attached to TIGER 800, it is only GIVI etc. making it only as it is adopted as OEMOption etc. from this year's MODEL.
The attachment of the Side case is also one-touch so that it can be confirmed whether it is properly attached with the color of the top of the Holder (normal : Green color, not mounted or abnormal : Red color).
However, since I am planning to install it in the OEMExhaust System, the exit system exit will be on the REMUS HexaCone Exhaust System I was wearing. So, the REMUSExhaust System is not Band stop (Type attaching Bracket to Silencer Body) Nevertheless, by using Exhaust Band, we slightly lower the position of Silencer and install it without interference.
Perhaps there is no problem if it is OEMOption's ARROW Exhaust System, but please be careful if you are wearing an external Exhaust System.
View detail
Fits: YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather
Tank Bag Hurry after purchasing additional purchase...
After purchasing Tank Lock XSTREAM XS 307, it turned out that Easy Lock was necessary and panicked for additional purchase.
?Good point?
- Easy installation
* Hexagonal Wrench can be installed within 1 to 2 minutes
?I like it?
- The price is too high for only things that processed iron plates and only 3 Bolts
- Net did not have any specific information on how Easy Lock would be needed, so I thought that it would be easy to forget to buy
- It is easier for consumers to understand who bought Set sales for different types of vehicles to prevent buying
Givi's TanClock (Tank Bag) It is a Parts that you must buy if you use.
Although I feel that it is expensive compared to the content of the product, because TanClock is a relatively inexpensive thing, it is possible to give much cheaper than buying a ManufacturerOEMO option product even if you see the price of Total.
View detail
![MONOKEY Base [M5] For FZ Series](https://global.webike-cdn.net/photo/article/27/1434875820827L.jpg)
Fits: HONDA NC750S DCT, HONDA NC750S, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, Others , HONDA NC750X DCT, HONDA NC750X DCT, HONDA NC750X, HONDA NC750X
With Bolt - on installation Can Tan!
For introduction of Monokey case, Fitting for MONORACK [441FZ] Purchased with.
Like Fitting, it is full of rigidity and I can not count on it as I do not feel any dust.
Case While loading Tandem, Passenger may be somewhat cramped.
I think that it is considerably different if it is about 50 mm backwards, but is this a trade-off with security standards around here ....
Always loaded SeatBack has been pushed forward slightly (Tanax Moto fizzTANAX motofizz : EURO Seat Bag MFK-063 14L used).
View detail
![MONOLOCK Base [M5M] For FZ Series](https://img.webike-cdn.net/catalogue/11160/60145_1_TS.jpg)
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CBF1000 06, HONDA CBF1000 07, HONDA CBF1000 08, HONDA CBF1000 09, HONDA CBF1000 10, HONDA CBF1000 11, HONDA CBF1000 12, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500
I like this design
When choosing Bracket to mount Top case
I decided to GIVI in this design.
Of course, from the Base attached to the Mono-lock case
It is comfortable to use.
View detail
![Fitting [541FZ] For Mono Rack](https://global.webike-cdn.net/photo/article/64/1432873762564L.jpg)
After all GIVI
Built securely and secure. And I have a Grip for TanDam. Truly it's like GIVI. I also attached a manual easy to understand. View detail
Attached to SR's Right Side.
I put the same item on SR Left. I wanted also Right Side to put the sorting bag to put the siding bag installed.
I feel that performance is the same with any Manufacturer.
Even when Bag is not attached, it is good to have no sense of attaching anything. It may be because it is SR.
I can run without worrying about getting involved in Tire, so I am relieved.
View detail
Fits: KAWASAKI VULCAN800, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN900 CLASSIC400, KAWASAKI VULCAN400
It is exactly OEM attached to DJEBEL 250 XC
Watch Impre and buy to DJEBEL. Everyone, using Color or something, it seems to be diversion mounted, but if you do it in the same way it will rise considerably - - - I'm something illegitimate so I've processed it and installed it.
In the first place Carrier of DJEBEL 250 XC is installed using Spacer. However, since the thickness of the Spacer and Support mounting part is 1 or 2 different, cut the side of the Spacer of the OEM Carrier 1 to 2 mm.
After that you need to bend A littleSupport, but as you can see, you can install it with OEM style.
I do not need to purchase Color or any additional parts at all.
However, since the tool BOX will not be installed, it is necessary to remove it.
There is no loading tool, but since we are loading Garber's Multi Tool in Motorcycle, there is no problem in any chance.
The angle with the Side cover is also exactly OEM.
View detail
Recommended from OEM as it does not damage Bolt's coolness!
Above all, design priority Motorcycle ... I wanted to avoid only getting stuck, so I chose it. It is compatible with Bag of cloth which I bought together, and it is useful for near distance Touring. Since the hole for passing Belt of Bag is attached to the top, it does not make it difficult to install and remove.
I do not mind even when I remove Bag, so I think that it is exquisite thickness and shape, so it is recommended from OEM.
View detail
Without this
I can not say without this attachment
It is a necessity to install Side Back
I usually go out to PetitTouring with Side Back removed
View detail
![Fitting For Mono Rack [259FZ]](https://global.webike-cdn.net/photo/article/95/1430465583395L.jpg)
Fits: HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four
As expected
I purchased COOCASE Ku Case V 50 REFLEX SL 50 L Top Case for the 2009 CB 1300 SB.
I found it to be attached to other people's Impression with CB 1300SB of the same type and purchased with Set.
The making itself was firm, it was lighter than I thought. Installation Instruction Manual was easy to understand and did not worry about installation. It seems that strength is enough.
Just Quantity : Pair (for Left and Right) Whether it's slightly different, Left Side Suspension has places in the gap with Cowl whereas Right Side has only 2 millimeter gap. Since it was also written by another person's Impression, I purchased it with awareness, so there is no problem - - -.
View detail
YAMAHAYamahaY's Gear Box Bracket
I bought a with Hole's Tail cover beforehand, so I did not need drilling. I had a hard time aligning the Box Bracket side with the car body side Screw hole.
GIVI's base plate could be installed without problems.
View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CBF1000 06, HONDA CBF1000 07, HONDA CBF1000 08, HONDA CBF1000 09, HONDA CBF1000 10, HONDA CBF1000 11, HONDA CBF1000 12, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500
It is not attached to DAYTONACarrier for NM 4 - - - -
Naturally, because it is Exclusive Design
DAYTONA 's Carrier for NM 4 could not be installed.
Because I am buying it as a Masterpiece
There is no choice but for your reference
View detail
![Fitting For Mono Rack [4100FZ]](https://img.webike-cdn.net/catalogue/11160/fitting_image-1_TS.jpg)
Reliable Exclusive Design
Purchased to install the company's Monokey case E 52 MAXIA
Because it is Exclusive Design preeminent futting !!
Although it took a while to install, it was acceptable range
And, although I say, I am lacking in my experience - - -
Stylish is not felt overall as a whole
Actually E52 was installed
I am Firmly without any particular shaking
View detail
Fits: TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH TIGER
Attached to TriumphTIGER 800
【What made you decide the purchase?】
Because it is an indispensable Items equipped with GIVITank Bag.
【How was it actually used?】
There is no installation looseness with confidence. Back When not wearing Ring Ring protruding is worrisome but unavoidable.
【Mounting was difficult?】 Very easy.
[Is there anything I was disappointed about?] nothing special.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Explanation of model number by vehicle type was unknown. I understood that BF02 is for Triumph, but I did not know if it conforms to TIGER 800, so as other users also commented on, GIVI Headquarters (Italy) givi. I confirmed it with it.
- The price for the contents - - - Because there is a high sense of expense ★ I made one Minus.
【Have you compared items?】 Because I aimed at GIVITank Bag, there is no comparable property.
View detail
It is according to an Ideas what [ other than a Bag ] of course, it is used in order to attach a Side bag, but is hung! It is found useful, although it folds up using a Carrying cord and a Chair is hung. Being also appearance and that a Parenthes
It is according to an Ideas what [ other than a Bag ] of course, it is used in order to attach a Side bag, but is hung! It is found useful, although it folds up using a Carrying cord and a Chair is hung.
Being also appearance and that a Parenthesis is also dramatically good are the Points which we can recommend to you again.
View detail
Right and left were purchased.The Parenthesis of appearance is [ both of directions ] good if it sees from back.The Bolt of the Sas upper part did not escape from left-hand side unexpectedly, and attachment had a close game, although right-hand side w
Right and left were purchased.The Parenthesis of appearance is [ both of directions ] good if it sees from
back.The Bolt of the Sas upper part did not escape from left-hand side unexpectedly, and attachment had a close game, although right-hand side was easy.Since until falls out to some extent, if it does pulling to the way which extracts a hidden Washer with Plierses etc. while turning a Wrench, it will be easy to extract the rest.It entered, when putting in, and the Bolt was put in, after carrying out kiln, raising lightly under the Swing arm using the Jack for cars and putting a hole together, since the hole of the Frame does not suit Sas.
View detail
With it being unexpected, the right-hand side attached to the ESTRELLA 05 model was taken simply, and was made.The Bolt of the Sas upper part also finished it as like omission 3 minute simply.Although the Tandem bar authentic positive in a Kawasaki is att
With it being unexpected, the right-hand side attached to the ESTRELLA 05 model was taken simply, and was made.The Bolt of the Sas upper part also finished it as like omission 3 minute simply.Although the Tandem bar authentic positive in a Kawasaki is attached to its own Motorcycle, and combined use was not completed, if a general-purpose Stay is bought, the fixation also of a Tandem bar is likely to be possible. View detail
I was very disappointed with your purchase, and forced to withdraw his favorable review, who left here two months ago. The reason - the products were of poor quality. The left part fell off and got lost in straight road due to the fact that cracked Bracke
I was very disappointed with your purchase, and forced to withdraw his favorable review, who left here two months ago. The reason - the products were of poor quality. The left part fell off and got lost in straight road due to the fact that cracked Bracket rear mount. (In the photo - Emergency version: Part I Fixed wire and tape recorded Craik). I first decided that incorrectly installed part. And just ordered a new one. But a month later snapped mount and the right parts! Important: I never had time to install saddlebags. I do not have time to buy them. Details were performed, in fact, only a decorative function! Cracks appeared on the mount in the same places. At the site of the fracture can be seen that the metal is very porous and does not withstand the vibration mount the part itself. In Russia, the road is worse than in Japan! Such destruction on the road is extremely dangerous, as the mount for the baggage actually rigidly mounting the rear only. Front - fork. With the destruction of the rear mount, front mount falls off almost immediately. Do fall down and can get into the spokes. This ensures an accident. In addition, the highly attenuated upper mount shock. If this time does not see the accident happen. I ask the manufacturer to immediately correct technology. Flat plate must be replaced by the spatial profile, and (or) you need to change to a higher quality material: elastic and durable. Return the broken product is pointless because of postage costs. I fix loss. View detail