Reviews
Windproof performance and design.
Replace existing Screen!
■What is Motorcycle's Screen?
Motorcycle windshield is a transparent plate attached to the front part. 。 "Screen" Ya "Windshield" Also referred to as 。 Windshield may come standard on some models, but if not, purchase separately.Protects against wind when driving a Motorcycle Windscreen. 。 Items useful to reduce fatigue caused by wind resistance when driving.
Points for selecting ■■Selection
Material must be strong enough not only to withstand wind pressure, but also not to crack and scatter in the event that it is hit by a stepping stone. It is also important to select a material that will not be deformed by heat in the intense heat of midsummer.
We recommend a type of resin material with the flexibility and strength of polycarbonate.
☆ Color selection is mentioned.
Normally, the basic color is transparent, but a wide variety is available, including Smoke Type, Mirror Bracket Type, and colored types.
Transparent color→ can be used under any conditions.
Smoke Type→ can be used as sunglasses only during the daytime. In addition, it is necessary to confirm at the time of purchase that the visible transmittance is 25% or higher in order to conform to the safety standards.
I originally bought this for my Full Cowl Motorcycle, which has a Screen, but I was dissatisfied with it during winter driving, etc., so I bought this for a retrofit.
The price is high, but I bought it believing that YOSHIMURA products should be good (laugh).
good point
Screen shape that does not destroy the body line of ☆OEMCowl.
The length of the head is long enough to fit the head when leaning forward, and the effect will be felt from 80 kilometers.
☆ Impact (Cracked) Polycarbonate resin with high resistance to
☆ Moderate [Color] Smoke condition is effective against sunlight. [Color] While Smoke. [Color] Clear visibility.
Easy installation with Bolt On. (Bolt and Nut are OEM Product)
Windproof performance is also high. They are also conducting wind power experiments.
A bad point
I think you should be a little careful when driving at night. [Color] Smoke, so it→s not that dangerous since it meets the safety standards.
Price is high. Considering the accuracy and quality of →Parts, the price is reasonable.
I purchased YOSHIMURA products following the Exhaust System, and I think that the high practicality and appearance of the products are worth the price.
Windshield is not only effective in protecting from rain, but also reduces fatigue such as stiff shoulders by protecting from wind when touring long distances, and is useful as a protection against cold in winter because it does not let the handlebar get covered with suction. 。 I don't feel it is effective for short distances, but it is very helpful for long distances and in strong winds.
YOSHIMURA is my guess, but I don't think it would be a bad idea to have it on other Manufacturers as well.
View detail
Satisfied with wind protection
The shape and Large size are nice and wind pressure protection. View detail
Fits: HONDA REBEL500(CMX 500), HONDA REBEL250(CMX 250), HONDA Rebel300
Genuine Puig New Generation NK Sport Screen for Rebel 300
This was a purchase a customer asked me to source for them to add to their Rebel 300 which they wanted a different screen than the one they already had fitted. This one is more of a retro look and gived the bike a better stance on the road. The custoemr had already sourced the correct part number for their bik so I did not need to do any research. Great stuff. The cost of this screen was a bit better than I could source locally, besides I already had a few parts in my basket that needed placing. I got them all shipped with EMS and the delivery took like 5 days from initial shipping from Webike warehouse. I have to say again, Webike warehouse really know how to pack items correctly and with the amount of packing involved, there is no way this screen or any of the other parts were going to get to me other than in 100% perfect condition. Well done Webike warehouse. So, this screen also comes with all the accessories needed to fit to this model of bike. No need to have to find a kit to do this as it comes in the box. The screen itself is gorgeous dark smoke and the clarity of the screen is perfect. It was a breeze to fit as everything fitted precisely as it should. This bike now looks a million dollars. One very happy customer. Thanks a lot Webike. View detail
Dissatisfied with the way it was packaged
The product itself was fine, but Yamato Transport informed us that the corrugated cardboard had been torn during shipping due to the sharpness of its shape, and the contents had leaked out.
Since this is an expensive item, please respond with another One sizeLarge corrugated cardboard with cushioning material packed, etc.
View detail
Fits honda wave 100
About quality and texture.: quality windshield PC plastic About the feeling of use : very solidly attached Products to buy together: it comes in 1 set Difficulty of installation : very easy Cost performance and comparison with other products : quite expensive but i want the best for my old bike About shipping and packaging : very neat packaging Any concerns, cautions, or advice when purchasing: careful not to scratch when installing View detail
Looks like OEM.
To install, simply remove the two screws, put them on, and tighten the two screws again.
It's very simple
Design as if it were OEM.
I still feel that the design of Mt series is completed by adding Shield.
View detail
Fits: BMW R 1200 ADVENTURE, BMW R 1200 GS, BMW R 1250 GS, BMW R 1250 ADVENTURE
dirty management
The tip is missing and unusable. 20,000 is Garbage. View detail
Very nice quality. Installed on my z550a3
Shipping was fast and the product arrived in perfect condition. It was pretty easy to install. I bent the screen by submerging it in hot water very slowly. I also bent the iron supports to get the tilt I wanted. View detail
Perfect windscreen
I was trying to decide on a windscreen for a couple weeks. I chose this Puig and am so glad I did! Not too small, not too big. 40°F at 45mph, I was very comfortable. I could not be happier with the look, fit, functionality. No turbulence around helmet or rattle / vibrations. 10/10 View detail
10/10 Great!
These hand guards are absolutely wonderful for riding in the cold! I got the bike up to about 45mph in 40°F weather and my hands felt good wearing general purpose work gloves. After an hour of riding, I didn't notice turbulence, rattling or vibration. I love the way they look as well. View detail
Fast and effective Large
I bought it for dress-up purposes and did not expect the wind regulating effect.
I drove about 150 km on the highway the day after installation and felt almost no wind roll in at the speed limit.
The wind control effect is surprisingly good even on the 120km section of the Tomei Expressway.
(When the height of the Scooleyn is set to the Largeest)
What I'm concerned about [Color] The Smoke is so thick that it is difficult to see the road surface when driving at night if the Screen height is raised.
I chose it for its looks, so I will run with that in mind.
View detail
Parenthesis is good!
I was torn between OEMOption and ACRYPOINT.
I am glad we chose this one.
The texture is good and I think Parenthesis has improved on its own.
I'm glad I bought it
View detail
Windproof effect is increased.
I installed ExplorerWindshield on my CL500 and love it.
Purchased LargeScreen for additional wind protection
70mm upward and 60mm larger in width.
The windproofing effect has been improved, so Standard Screen
It's good for people who are tall and concerned about Wind Cutting noise.
However, in my case (Height 171cm) The top edge of the Screen is exactly at eye level when you are sitting down.
It bothered me so much while driving that I went back to Standard Screen.
Just taller as above. (180 cm or more) Then I think the top edge will be slightly below eye level.
Combined with the windproof effect, I think it is satisfactory enough.
View detail
Fits: KAWASAKI D-TRACKER X, KAWASAKI KLX250
Diversion to SUPER SHERPA Protection effect realized
Installed on SUPER SHERPA.
It is for KLX250 but just fits to the handlebar clamp width of KL250 Sherpa.
However, the mount bar is covered over the Choke Lever in the OEM position, so the Choke Lever cannot be pulled out.
The installation of the bar rise kit has also eliminated any problems with hose and cable routing.
I am satisfied with the Wind protection effect on highway driving.
View detail
Good
Very good supercub 110 good very good good oh good very goood 100ja numoo manayo jinja manayo 100ja uke ssu yo jinja mana mna mna ------------------------ --------------------------------- Very good supercub 110 good very good oh good very goood 100ja numoo manayo jinja manayo 100ja uke ssu yo jinja mana mna mna Powered by Google Translator View detail
Fits: HONDA SUPER CUB 110, HONDA SUPER CUB 110 60th Anniversary, HONDA SUPER CUB 110 STREET, HONDA SUPER CUB 50, HONDA SUPER CUB 50 60th Anniversary, HONDA SUPER CUB 50 STREET, HONDA SUPER CUB110
Good
Kijima numoo kawai desne good good very good nice meterbar good beautiful good good very good good good good goood goood View detail
Fits: Others For handlebar without brace Handlebar diameter 22.2mm
Sufficient wind protection and good Design
[How is it used?
The purpose is to protect against cold during winter touring and to reduce fatigue when using high speeds.
Was the one you received as per Image?
When I put it on, it is not as large as it looks in the picture, but it is reflecting.
Was the installation difficult?
It can be installed with a single 4mm Hexagonal Wrench, and even beginners should have no problem if they assemble it in order.
How was your experience with it?
It is windproof enough to keep the body cool in winter, and high speed is easy!
The design is good, and the windshield tends to be tacky when it comes to windshields.
This product is Refreshing and looks great!
[Included Parts:were they on?
Quantity of RepeatThailand for fixing Cable when mounting electrical components on the Mount bar and a set of components required for installation.:2pcs included
[Was there anything that disappointed you?
Nothing special, just what I expected.
Large type is also available as an option, which is larger than the attached Shield.
I plan to replace it with a Short Type Shield in the summer because it is too much trouble to remove the bar!
I would like to request to Manufacturer that the Standard&Large type be made a little more downwards in the Large size. (50mm) I'd like to have something extended as much as possible.
Because the wind is coming from a slightly lower direction, the wind is coming from a slightly lower direction.
I look forward to your consideration.
View detail
Fits: HONDA SUPER CUB 50 , HONDA SUPER CUB110, HONDA SUPER CUB110
Personal must-have equipment.
[How is it used?
I had used Windshield on my previous 50cc Scooter (TODAY), so I installed it about 10 days after purchasing my current Motorcycle.
For protection against cold and wind.
Was the one you received as per Image?
It fits the unevenness of the Handlebar Cover and is Exactly as shown in the Image.
Was the installation difficult?
JA59 has Mirror positioned at Quantity:Pair (for Left and Right) I had to adjust the angle of the L-shaped Bracket because the Right Mirror is slightly backward. Specifically, the angle of the L-shaped bracket needs to be changed because the Right Mirror is a little backward (Photo Quantity:(See 1pc. eye; Right angle is a little shallow).
Also, the KIJIMA Mount Bar Bracket (204-0711), which was attached later, made contact at the bottom, so further adjustment was necessary. In addition to the angle of the L-shaped bracket, we managed to open the gap by shifting the bolt to hold the ShieldBody at the limit as much as possible (see photos 3, 4, and 5, about 1 cm).
The work took over an hour. Well, I think I am just clumsy and a person who is used to it can do it in a shorter time.
How was your experience with it?
The wind pressure that I felt when I did not have it is gone, and it is comfortable. With a moped 2, I can reach about 60-80 km/h, so I especially appreciate it when touring on Bypass or other roads where speed is high.
And in the winter, I still thought Large was the best way to reduce the cold by not having the wind blow down from the neck down.
Since it is colorless and transparent, it is good to be able to see the front clearly even through the Shield when you are in a slightly bent posture (in a normal riding position, the upper half of your face will feel like it is out of the Shield).
[Included Parts:were they on?
No other than InstallationInstruction Manual. Two 14mm Wrench tools are required. I worked with a 100mm wrench.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
There is no space between the Bolt used to attach the ShieldBody to the L-shaped Bracket and the Bolt on the Body side, so I had to turn the Bolt a little too hard (see the 4th and 5th pictures). In my case, I managed to turn it, but some people may need to shave the head of the Cap Nut.
View detail
Expected
I don't like LargeScreen very much,
[Color] I was thinking Smoke, a little larger than OEM, would be just fine.
I found this product on the lineup.
No problems with ease of application, appearance and quality.
View detail
Since it is genuine, it has a good fit and is sturdy.
The weather was cold in Korea, so I stored it after purchasing it and installed it when the weather warmed up a bit.
As expected, the screen is small, so it's not very effective in blocking wind noise, but it's great for dress-up. ^^
Installation is simple, so it's easy to do on your own, and the work time is quick.
However, since there are multiple screen rubber packings, it would be good to have a small explanation.
-------------------------------------------------- -------- The weather was cold, so I kept it after the purchase and the weather was released a little. After all, the screen is small, so it doesn't have a lot of effect, but it's the best for dress-ups. ^^ The installation is simple, so it's easy to do it alone and the working time is fast. However, there are several screen rubber packings, so it would be nice to have a small explanation. Powered by Google Translator
View detail