Reviews
It's solid.
It is just the right size and shape.
The windproof effect is not that great, but I am satisfied with the large size because it has good balance and is easy to see.
I think it is also very strong.
View detail
Little wind protection but high quality around Handlebar
Changed the Spec. from Screen for Grom of DAYTONA.
Although the Screen is a little small, there is also some windproof effect, and above all, the stiffness and the texture of Bracket are high and the satisfaction is high.
DAYTONA's paint is not so good and it will come off when it rusts.
In that respect, ZETA seems to have no such worries.
View detail
Awesome.
This wind screen has a unique design and the bar is very useful. In particular, it provides good visibility when installing a smartphone or navigation system. Zeta's products are also very reasonable in price. View detail
Good quality.
The quality is very good. The price is high but Recommendation. View detail
Navigation System Bracket is Main
The Screen is not a large type, so it has some effect as a wind shield. The Screen is not Large type, so it is not as effective as a wind shield. View detail
Increased sense of adventure
After wondering which Windscreen for CROSS CUB I should use, I decided on this one. Because the Screen itself is small, the effect of the wind shield is not that much, but if there is it and there is not it, it is very different. After all, because the appearance became good, I am very satisfied.
When installing, the Bracket interferes with the Switch box a little, so I put a Washer on it and raised it.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
Wind protection and increased visibility of navigation
It is for CRF250, but the size around Handlebar Clamp was the same, so it was possible to divert to the same HONDA vehicle.
My concern was the interference of Clutch and Choke Cable.
After all, it seemed that Cable was overpowered in the position as it was, so it was necessary to adjust Route.
The feel of it.
The wind protection effect while driving is very high.
It can be used as a Mount bar for Mobile.
Navigation or a smartphone can be mounted near the top of the Meter.
Refreshing around the Handlebar and
It is also safe because the movement of the eye becomes Small.
About the look.
The way it looks from the Riding position is very cool.
It doesn't match the body of the car when viewed from the side, so it's not very good.
I can't complain as this is due to it being a retrofit for another model.
View detail
Zita Windshield
I used it last winter season and it had a good storm effect. Also the quality of the product is good and it is a solid product that can be used for a long time. A must have for cold weather protection. View detail
Great windshield!
Delivery to Moscow, Russia took 54 days. The windshield was mounted easily to my KLX250s-2019, it's well designed and constructed. It looks great and provides good wind protection. I tested it at a temperature of +8 - it was much easier and more pleasant to ride than without it. Highly recommend it to anyone who travels long distances in cool weather. View detail
It's solid.
Compared to the Adventure Screen made by YAMAHA Hay's Gear, the installation was easier, the rigidity of each Parts was higher, and I could feel the Windshield effect.
I changed from YAMAHA to here, but having changed, I was able to change the Mount of Hand guard to FrontFork Mounting (it is impossible with YAMAHA-made Adsk).
Thanks to this, the stiffness of the Handlebar area has been increased.
The price is about 5,000 yen difference. I think it's quite a bargain.
Now it's just a matter of how you like it to look--I like it myself!
View detail
Just the right size to keep the Meter out of the rain!
I bought this to protect my Meter from the rain rather than the wind. There is little effect on the wind that hits the face...
The fact that Universal holders can be attached is another reason why I chose it.
View detail
The Touring's comfort is improved! There is a harmful side, but it is enough.
The Instruction Manual states that it is compatible with the STD Handlebar, and since Sash's car, the Kelkus, uses the OEM Option Parts, Tapper Handlebar, I asked him to install it after replacing it with the OEM STD Handlebar. It was a great experience.
The quality is high, there is no dirt, scratches, BALI, etc., and the transparency of ShieldScreen is also satisfactory.
I would have been more than happy to include a mounting bracket that would also fit the Tapper Handlebar.
After the installation is completed, the front end of the car is slightly heavier and the stability of the car is better.
If you are trying to get a light feeling in NORMAL, I think you will need to Reset the suspension.
Windproofing, from the time of NORMAL, reduced by half. The attack is also reduced, and the fatigue of the rider is also reduced. The comfort has been improved. Recommendation for touring riders who want comfort.
On the other hand, I think that the rider who runs off-road aggressively feels that the agility and the feeling of lightness by the weight are lowered, so Recommendation is Stripe Sen.
View detail
Adventure Degree Ma Stripe Si
The 22mm bar has a tougher feel and more adventure tourer, the Screen is small and the windproof effect is not large, but in the middle of winter, without it, there is a large difference. I think that this smallness has not destroyed the style of CT110 HUNTER CUB. If you want the windproof effect of the largest limit, DAYTONA or Asahi windproof will be good. It is good that the height and the angle can be adjusted variously, but it is a waste that the bar is very easy to be damaged when changing the height. View detail
Installed on XTZ125
I bought it in order to refreshing around Handlebar which became messed up by Navigation and USB.
Initially, I was planning to install the Handlebar and Hand guard since they are the same ZETA products;
In fact, it took about 10 hours of adjustment due to interference by interference w
Specifically, I'm not sure if the Handlebar and Hand guard are compatible, or if it takes a few hours to force the angle to match the angle…
When I thought that I could finally install it, I wondered if it was because I set the Hand guard to Stem Mount, or if this product slightly interfered with the WW.
At the same time, Clutch Wire and Brake hose are a little tight to handle.
I had no choice but to reverse the ZETA Handlebar UPSpacer 19mm to raise the clamp section & hellip;
Since they are unified by the same manufacturer, I wish they would have missed something in the design stage.
This manufacturer's product is not a problem to use alone, but the premise is that it is a universal product, or it is unified by the same manufacturer, so it should be large and strong! I think that it will have a hard time when it heads with the naive idea that it says.
However, I think that I can try it once by all means if you are a genius because it comes with the convenience and the strength only to match the hardship.
View detail
Just right. Great texture.
It does not become the hindrance of the vision, and the windproof effect is enough though it is the smallness than I thought.
It was easy to position and install, and the components are sturdy, so I was able to complete the installation with minor adjustments.
[Color] When you get the Type of Smoke. [Color] I want to wear it alternately with Clear and enjoy it.
View detail
Convenient for long touring
When I was running without the wind shield, the wind hitting my body was too strong and it was hard, but after installing it, it prevents the wind from hindering me even if I speed up to some extent. It is abstract, but it is quite effective.
The φ22 bar is also convenient, and the Smartphone Holder that was attached to the Handlebar was relocated. When I look at the navigation on my phone, I don't have to move my eyes as much, so it makes me feel safer and more comfortable while riding.
I struggled a bit to avoid the Clutch Wiring when installing the Left Side Bracket, but I basically followed the instructions included with the kit and completed the installation using only the Hexagonal Wrench, OEM and included Bolt.
View detail
It comes with other than KLX.
I don't actually have it on my KLX, I have it on my Bw's125X.
For other models, the upper bracket is replaced, but for the KLX, the DownBracket is also replaced.
It is included. So if the Handlebar diameter is φ22 and there is no problem with the Mount width, then any
I bought it on the assumption that it would be divertable to my car model, and bingo.
In the case of the Bw's125X, it fits exactly between the Handlebar Bracket, but the Meter does not.
If you have a large and thick MeterBracket, it will interfere. The original processing is
I thought it was unavoidable, but I thought it would fit nicely with the φ22 Accessories bar.
I was wondering if there was a DAYTONA Accessories bar (Those without a neckline) When I attached it to the
It fit nicely into place.
All parts are highly accurate, no wobble or strange resonances, and the Screen works well even at legal speed.
I was never defeated by wind pressure.
The windproof effect is not so expected as a matter of course because it is attached to something other than the original car model.
View detail
Rather than Windshield, GuardShield?
I was worried about being able to retrofit it with Shield, but I bought it.
Basically, because it is made with the Standard Spec. in mind, Parts (especially around the Handlebar) Please be careful if you are replacing the
I am replacing the Handlebar and have installed an Armour Hand Guard Bend with it. (Both are made by ZETA.) In this state, it is hard to install without adjusting the Brake line and ClutchLine a bit.
After installing it, I drove it for a bit, but I don't know if it depends on my body type or if the wind rectification has changed.
However, I think the wind flow around Meter has changed because the Key Holder is moving, so the wind flow has changed.
It was a coincidence, but it was a small area of shield from flying objects from the front, but it was a small area of shield from flying objects.
There are not many places to put a KLX250 holder, but with this Merit, you can put a lot of things on it.
View detail
OEMFatTypeHandlebar not supported
Purchased without looking at the product description carefully.
It may not be able to install on Smooth if the standard Handlebar has been replaced with a Handlebar, because it uses the thickness of the standard Handlebar to install the Screen.
I'm replacing it with an OEM FatType bar and it looks like I can force it to be installed with a U-shaped bolt.
The part of the U-Bolt that is sticking out will be cut and covered at a later date.
View detail
Recommended for long-distance touring
The large screen covers a large area of the upper body, which makes it ideal for long distance touring.
It's not easy to get tired and it's a big help.
The Screen and Mounting Hardware are also nice and sturdy and not cheaply made.
Another advantage is that you can attach and remove it by simply loosening the mounting bolts when you don't need it.
If I had to pick a drawback, the original Handlebar Clamp is quite strong.
It is tightened by Torque to loosen it and install Screen.
A longer 6 square wrench is required.
View detail