Reviews
Although it was not a compatible model, only with this carrier - - -
I have been looking for a Carrier attached to my KSR 2 for a long time.
OEM Carrier for KSR 2 and Carrier of Raflo are making holes in Rear cowl - - - Although I did not like it, I bought a cheap Carrier of Made in Thailand, but even though I bought it, it was distorted, the position of the hole was sloppy, and further, already around Rear (Fender and Blinker) As I replaced it, the installation Bracket struck Blinker and shifted Blinker (Redraw around Rear) Whether you are going to choose to process Bracket or not, and until then you have to use Bracket that seems to be problematic in strength - - - I could not install Carrier in doubt.
Basically, this Carrier of KIJIMA was a Carrier that can only be installed in the KSR PRO series since 2013, but it has the same structure & strength as the Multi Wing Carrier of DAYTONA which is used for ZEPHYR 750 and has a structure of trust , Including the attachability to the car body, at a glance "If you can only have this Carrier!" I made a preliminary examination for installation.
Looking at the difference between KSR PRO and KSR 2 after 2013, the mounting hole of the Bracket of the Seat part seems to be no problem, the difference is that the position of the hole of the Belt mounting part on the Rear side. It seems like a hole misalignment of just a few centimeters, so I felt that if I processed the Bracket position on the Carrier side, I seemed to manage it somehow, so I tried purchasing this Carrier with no good idea.
After all, because the Seat part was not wanting too much Cowl side Cut when installing this carrier, so that Cowl's Cut was set to the Smallest, I installed the Carrier attached bracket (welding) Then rebuild, the AssistBand part also looks for Pipe that fits the screw and aligns it to the car body (Because I did not want to pinch Cowl, Cowl part somewhat extended the hole and inserted Color) We welded to Carrier and finished it.
(Incidentally, reinforced welding has been done since the Bracket of the installation Nut part of the Frame of the Band part seemed weak too)
Although my poor fecal welds were scraped cleanly and devastated by Black paint, they could safely be installed, there was no problem for actual use, easy to remove, easy to remove, excellent in design and excellent in strength (In order to use GIVICase, there is no need for Hook, it was enough to drill holes to install the Base) I am satisfied with this Carrier Large.
Still more KSR 1 - 2, and Owner who is riding the Large thing before 11013 before 11013 think that you can also see Owner, so I would like KIJIMA to consider selling this Carrier corresponding to that.
View detail
Women or even alone OK!
Even women alone, installation completed in less than an hour. Because it is KsR, it was a sweet idea, I wonder if it's possible without cutting, but still impossible. Interfering with Cowl, the Screw hole of the Heat Insulating Material does not fit, and I do not want to cut as much as possible, so I cut it a bit at a time. Other than that it was hard to turn the Screw of the OEM's hexagon? Because I'm going to put a Box, I attached a Carrier first after attaching the Base.
It was nice that Box was soon attached. If you are Boxed, please attach Base and work is Recommendation. The shape is not a bit Stylish, Personal opinion It is Pikachi at easy attachment. Since it is not a rod-shaped carrier, the position of the hole to attach the Box will be small, so be careful. Translation (It is appreciated explanation of please enter here.
View detail
fast delivery And can track the movement of the product all the time. The packaging is good, but sometimes I feel that the packaged box is too big. The product looks good and strong. It looks good to wear. But the point of attachment to the shock absorber
fast delivery And can track the movement of the product all the time. The packaging is good, but sometimes I feel that the packaged box is too big. The product looks good and strong. It looks good to wear. But the point of attachment to the ear shock is too small. causing the rubber ear choke to deform It should make it the same size as the hole in the fork. Or maybe free a ring comes with the product, it's very good. I wear it on both sides. When I don't put it in my bag, it looks good again. Fast delivery And can track the movement of music merchandising at any time, but I felt good mood wrapped box containing too big. Its good looks and athletic wear and look good. But the mounting ears Oche's too small. It's made of rubber ear Oche deformation. It should be about the size of the ear hole of the Oche. It may or washer comes with the product is very good, I put the two sides at the bag, it looks good again. (Google Translation) View detail
Perfectly
A beautiful Plating gives a good texture.
Installation is easy.
It is purchased for the installation of DEGNER's Nylon Saddle Bag NB-3.
It is just like OEM Product Match on CB 1100.
View detail
Delivery and packaging that good, product looks very beautiful. And can fit easily into my yamaha sr400FI 2014. The next time i will order more.
Delivery and packaging that good, product looks very beautiful. And can fit easily into my yamaha sr400FI 2014. The next time i will order more. View detail
Fits: HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1000 SPORTSTER 1000, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily
Saddle Bag Slide Rail
Since Bag changed from Both Sides to Type that hangs on One Side, we introduced this product. It is a stick to pass Belt of Bag. I do not understand well, but it seems necessary, so it is probably OK but probably OK View detail
BackRail installed in YamahaBolt
Quantity BackRail : Pair (for Left and Right) Purchase
With Back support and Set, Included Parts : It can not be installed by itself
Left Side purchases Back support and plans to install with Set
Right Side caught Nut and installed it.
Usability, looks are nice.
View detail
Attached to SR's Right Side.
I put the same item on SR Left. I wanted also Right Side to put the sorting bag to put the siding bag installed.
I feel that performance is the same with any Manufacturer.
Even when Bag is not attached, it is good to have no sense of attaching anything. It may be because it is SR.
I can run without worrying about getting involved in Tire, so I am relieved.
View detail
Fits: KAWASAKI VULCAN800, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN900 CLASSIC400, KAWASAKI VULCAN400
It is exactly OEM attached to DJEBEL 250 XC
Watch Impre and buy to DJEBEL. Everyone, using Color or something, it seems to be diversion mounted, but if you do it in the same way it will rise considerably - - - I'm something illegitimate so I've processed it and installed it.
In the first place Carrier of DJEBEL 250 XC is installed using Spacer. However, since the thickness of the Spacer and Support mounting part is 1 or 2 different, cut the side of the Spacer of the OEM Carrier 1 to 2 mm.
After that you need to bend A littleSupport, but as you can see, you can install it with OEM style.
I do not need to purchase Color or any additional parts at all.
However, since the tool BOX will not be installed, it is necessary to remove it.
There is no loading tool, but since we are loading Garber's Multi Tool in Motorcycle, there is no problem in any chance.
The angle with the Side cover is also exactly OEM.
View detail
Right and left were purchased.The Parenthesis of appearance is [ both of directions ] good if it sees from back.The Bolt of the Sas upper part did not escape from left-hand side unexpectedly, and attachment had a close game, although right-hand side w
Right and left were purchased.The Parenthesis of appearance is [ both of directions ] good if it sees from
back.The Bolt of the Sas upper part did not escape from left-hand side unexpectedly, and attachment had a close game, although right-hand side was easy.Since until falls out to some extent, if it does pulling to the way which extracts a hidden Washer with Plierses etc. while turning a Wrench, it will be easy to extract the rest.It entered, when putting in, and the Bolt was put in, after carrying out kiln, raising lightly under the Swing arm using the Jack for cars and putting a hole together, since the hole of the Frame does not suit Sas.
View detail
With it being unexpected, the right-hand side attached to the ESTRELLA 05 model was taken simply, and was made.The Bolt of the Sas upper part also finished it as like omission 3 minute simply.Although the Tandem bar authentic positive in a Kawasaki is att
With it being unexpected, the right-hand side attached to the ESTRELLA 05 model was taken simply, and was made.The Bolt of the Sas upper part also finished it as like omission 3 minute simply.Although the Tandem bar authentic positive in a Kawasaki is attached to its own Motorcycle, and combined use was not completed, if a general-purpose Stay is bought, the fixation also of a Tandem bar is likely to be possible. View detail
I was very disappointed with your purchase, and forced to withdraw his favorable review, who left here two months ago. The reason - the products were of poor quality. The left part fell off and got lost in straight road due to the fact that cracked Bracke
I was very disappointed with your purchase, and forced to withdraw his favorable review, who left here two months ago. The reason - the products were of poor quality. The left part fell off and got lost in straight road due to the fact that cracked Bracket rear mount. (In the photo - Emergency version: Part I Fixed wire and tape recorded Craik). I first decided that incorrectly installed part. And just ordered a new one. But a month later snapped mount and the right parts! Important: I never had time to install saddlebags. I do not have time to buy them. Details were performed, in fact, only a decorative function! Cracks appeared on the mount in the same places. At the site of the fracture can be seen that the metal is very porous and does not withstand the vibration mount the part itself. In Russia, the road is worse than in Japan! Such destruction on the road is extremely dangerous, as the mount for the baggage actually rigidly mounting the rear only. Front - fork. With the destruction of the rear mount, front mount falls off almost immediately. Do fall down and can get into the spokes. This ensures an accident. In addition, the highly attenuated upper mount shock. If this time does not see the accident happen. I ask the manufacturer to immediately correct technology. Flat plate must be replaced by the spatial profile, and (or) you need to change to a higher quality material: elastic and durable. Return the broken product is pointless because of postage costs. I fix loss. View detail
In order for two held vehicles to share a Rear box, it purchased by the addition. With the photograph, a drilling process is carried out to Y's Gear multi-carrier II, a Base is attached, and it has attached to CRM250R. I think that it is cheap
In order for two held vehicles to share a Rear box, it purchased by the addition.
With the
photograph, a drilling process is carried out to Y's Gear multi-carrier II, a Base is attached, and it has attached to CRM250R.
I think that it is cheaper than the Base set of a Manufacturer besides
, and there is no loss even if he buys it when two or more vehicles are owned.
View detail
Installation is very easy on the bike. Great looks. The design looks very tough and durable. I recommend it. Best wishes from Russia!
Installation is very easy on the bike. Great looks. The design looks very tough and durable. I recommend it. Best wishes from Russia! View detail
It looks like the device installed on the right side of the motorcycle. Attention! Need to buy the luggage adapters on both sides of the bike. Wish! To maintain the correct position of dampers, the manufacturer must include a set of two goals for the l
It looks like the device installed on the right side of the motorcycle. Attention! Need to buy the luggage adapters on both sides of the bike. Wish! To maintain the correct position of dampers, the manufacturer must include a set of two goals for the lower anchorages. Their thickness should be equal to the thickness of the mounting bracket of the adapter for luggage. View detail
[Webike Monitor] It attached to '05 ESTRELLA-RS. Since it is possible if, as for attachment, there is one Wrench of 12, it is easy. since the Bolt of the Rear suspension is removed -- attachment -- firmly . combined use with the KAWASAKI pu
[Webike Monitor] It attached to
'05 ESTRELLA-RS.
Since it is possible if, as for
attachment, there is one Wrench of 12, it is easy.
since the Bolt of the
Rear suspension is removed -- attachment -- firmly .
combined use with the KAWASAKI pure Rear carrier
worried is also satisfactory -- it is .
View detail
Although it has equipped also with attaching accuracy easily satisfactorily, there is no important Back, and since it is obstructive, it has removed.
Although it has equipped also with attaching accuracy easily satisfactorily, there is no important Back, and since it is obstructive, it has removed. View detail
Fits: HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1000 SPORTSTER 1000, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily
I think that a car body may be matched since it is a Black.When attached together with the Support, the die length of the Bolt was lacking.
I think that a car body may be matched since it is a Black.When attached together with the
Support, the die length of the Bolt was lacking.
View detail
Fits: TRIUMPH BONNEVILLE [Bonneville]., TRIUMPH BONNEVILLE [Bonneville].
[Webike Monitor] It is the completion of wearing only at 共締め(ing) with two Screws, the Suspension and a Rear step. Since it is almost comfortable even if texture is also good and the Side bag is not attached, it begins to keep attaching. Since only
[Webike Monitor] It is the completion of wearing only at 共締め(ing) with two Screws, the
Suspension and a Rear step.
Since it is almost comfortable even if texture is also good and the Side bag is not attached, it begins to keep attaching.
Since only left-hand side is treated by Webike, let's look for right-hand side by others.
View detail
It was an Exactly although attachment was also easy although attached to the VULCAN DRIFTER, and it was an object for Yamahas SR400.
It was an Exactly although attachment was also easy although attached to the VULCAN DRIFTER, and it was an object for Yamahas SR400. View detail