Reviews
Fits: HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125
KF47.JK05 conformity check
I use a PCX to commute to work, and since the parking lot is not paved and the dust from the neighboring workshop was flying around, it was a hassle to buy a Body Cover. When I asked webike about the compatibility, they told me that they had not yet checked the new model, but I bought it anyway because I thought it would not be so different from the old model. When I installed it, the length direction was fine, but the horizontal dimension of the front half could not be folded inward due to the limit. The edge of the Seat peeks out a little if you don't hold it gently,
I am writing to add that I have used it for exactly one year. I hung it up, took it off, and folded it again five days a week, and after exactly one year or so, it started tearing from the seam of the pocket for storage. I hope it has been fixed.
View detail
Fits: HONDA CT125, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 90DELUXE, HONDA SUPER CUB70DELUXE
Used in JA59
Installation is easy! Once you get used to it, it only takes a minute.
The texture is good and looks like OEMParts.
I haven't sat in it, but my wife says it's a solid Seat and it's safe.
Glad I didn't go cheap. (Sweat)
View detail
It got easier to ride
[How is it used?
It has been over 10 years since the vehicle was purchased and the Seat has deteriorated over time.
How was your experience with it?
...The bend in the knee is just right.
I no longer have to worry about contact with the footpeg when I put both feet on the ground.
View detail
Slim seat
[How is it used?
I was concerned about the footing when I rode with RenBarrelMotorcycle, so I bought the car before delivery and returned from the Motorcycle shop.
Normal seat, I replaced it as soon as I got home.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Easy to remove and replace the Rubber Bush from the Normal seat.
How was your experience with it?
Footing has improved a bit.
I have driven about 200 km since installation and so far no problems.
[Included Parts:were they on?
Seat only, so no Included Parts:.
[Was there anything that disappointed you?
There is none
View detail
Replace SR with WM's Semi Double Seat IV.
This is a replacement from DAYTONACOZYSeat, but the Seat height will be slightly lower.
The raised Rear makes it easy to check the Fitting position on the buttocks.
The seat feels soft and quite thin, so it seems hard to sit for a long time.
The space between the Seat and Tank (about 2 cm) is slightly empty, so if this bothers you, you may not want to do this.
We are bulking up with TankOffsetParts from Bore Ace, so the gap is about 1cm.
The bi-Ping gives a slightly softer impression, which may be to the liking of different people.
I had no problems at all with the Fitting of the installation.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Bagus! BAGOSE Aluminum Seat Lock Plus for ZEPHYR750
It was a real itch that I could scratch, and I was able to fix it with MaterialUpgrading, a common problem with ZEPHYR. Thank you, BaGOOSE. View detail
It was too tight.
At 172cm and 78kg, the upper body was relatively comfortable, but the lower body was tight. As the Instruction Manual says, it is better for shorter people.
The lower half of the body is also considered to be Fit. I felt that the seat surface is narrower than the Normal seat.
View detail
Purchased for touring purposes
I know what it's like to sit down and feel somewhat different.
Expect to see how the rest changes after long hours of driving.
If it makes it less of a pain in the butt, great.
View detail
gCraftCustom seat
Both feet are sticky and in my opinion, the position is good and I like the style very much. View detail
I think this is the only 250TR Seat that is waterproof.
I had been using a different external Seat for my 250TR, but since I also use it for commuting, I wanted to replace it with a Seat that is waterproof.
Until now, if I got wet in the rain with the Tuck Roll Seat, the Seat would not dry out for over a week and my butt would get wet every time I rode.
This time we decided against Tuck roll and chose this Seat with WaterproofFilm.
I asked around to see if other companies' Seats on Yahoo! Auctions had waterproof treatment, but none of them had waterproof Seats, so I finally found this product.
As you can see in the picture, I tried it out, I sprayed water on it with a Sprinkling can, wiped the water off the epidermis, and then laid the Tissue down and sat on it, and it did not get wet at all!
I am impressed!
Now I can escape from wet buttocks on my commute to work.
The comfort is just right, with just the right amount of firmness.
I have not tried long distance driving yet, so I am only worried about my buttocks getting sore, but the waterproof treatment is a Large thing for me, so I will use it for Large things.
View detail
Same Quality as OEM Product
This is the same quality as the OEM Product, installed on an external Seat that uses the OEM Mount base. The position of the holes, etc., are exactly the same as the OEM Product. View detail
Can also be installed on RH09, seat is wider and buttock pain is considerably alleviated.
I was concerned that the RH09 OEMSeat, because of its forward-lowering and slippery epidermis, would move closer to the Tank side.
Although not compatible, I found an example of installation on RC90, so I bought it thinking that it could almost go there in terms of shape.
If you attach it as it is, the clearance with the DummyTank side will be tight, and it will rub against the lid when you open it.
If you use a RubberWasher on the mounting area, it will fit in the rear of the car body.
There are several differences from OEMSeat, but I felt the following in the order of Large Kimono
1.Epidermis is hard to slip
2.Seating surface (especially in the rear) is quite wide
3.The front section is also wider, so the footing is slightly less comfortable.
1 and 2 have considerably alleviated the pain in the buttocks during long rides.
As for 3, the footing feels as if the Seat height has been raised by 1-2 cm, but it does not bother me that much.
The concavity and shape of the DummyTank section does not match the shape of the DummyTank, so there is some discomfort when looking closely, but I am very happy with the reduced pain during the ride.
View detail
Let's just call it RepairMaterial.
Used for OEMSeat Repair.
Seat is back to normal.
It doesn't have the performance to reduce buttock pain, but it does have the performance to reduce buttock pain.
I am satisfied with the hold feeling and as a repair material,
View detail
MT 09 sargent seat
100% worth it. Not a soft Seat, but its like around your ass, and hold very well. Its got a more flat seatig position, and you not slips on the tank. Also wider at the back section Than the original, but ön the front pretty much the same and you got that slim feeling like on the original Seat. The Seating height is also same to the original Seat. View detail
It is made the same way as OEM.
It is made the same as the OEM SeatMounting Bracket and was used on an external Seat that uses the OEM Bracket. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50Custom, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA CUB press 50, HONDA LITTLE CUB, HONDA CUB press 50, HONDA LITTLE CUB
Happy!
I am satisfied with the look and balance! Comfort is a little firm, but I think it will soften with use. View detail
It works, but …??
It is effective, but it seems like the Gel should be a little thicker. View detail
Seat reupholstering of moped
The texture is almost the same as OEM. The reupholstery process was also not confusing because of the instructional video.
It's been about half a month and no sagging. 。 It is a very comfortable seat.
View detail
High quality.
The OEM Seat skin tore and I purchased this product.
The skin is a little thicker than the OEM Seat skin, but it is flexible and even a beginner could easily reupholster it.
Seat grips when driving are also fine.
I am also satisfied with the OEM look of the Large.
View detail
Slightly cheaply made
I have a Gel zab under the Seat cover to reduce the pain in my buttocks. Therefore, I cannot verify if this Seat cover is effective. Sorry. The construction is overall good. So why did we call it cheap? Because when we pulled the string, it was slightly torn. It does not affect the use or appearance. I think I used too much force to squeeze the string to wrap and secure the Seat, trying to squeeze it tightly. Please be careful everyone. View detail