Reviews
Fits: HONDA LEAD 90, HONDA LEAD 100, HONDA LEAD 100, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA FORZA250, HONDA CRF250L, HONDA CBR125, HONDA CBR150R, HONDA CBR250R (2011-), HONDA ADV150, HONDA FORESIGHT, HONDA FORZA(MF10), HONDA FORESIGHT, HONDA DIO110, HONDA NSR80, HONDA NS50F, HONDA NSR50, HONDA GB350
Self-sufficient Attachment
These are self-satisfied parts that emphasize appearance.
Quantity:Pair (for Left and Right) I put it on my car and it looks good when I ride in the car!
View detail
Fits: HONDA CBR600RR, HONDA CBR600F, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA X4, HONDA X-11, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One), HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One)
These are essential parts for the sober-minded!
It's like an introduction to the cutting PARTS of ANTLION that I've always wanted to be a part of. "HONDA" The letter Master cylinder cap is installed.
I had high expectations for antlion because it is a well-known brand that sells high quality products with extremely high cutting precision,
As I expected, the actual product was excellent.
The black anodized treated cut-out master cylinder cap has a finish with slight cutting blade marks on both the front and back, a spec. that will make the hearts of us men who love large industrial products throb with excitement (lol).
Die-casting (cast metal) cannot express this quality, so I am glad I bought it.
It takes only 5 minutes to exchange and the price is reasonable,
I think this is the best buy for those who are just starting out with custom.
I hope my Review is helpful.
View detail
Fits: HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA X-11, HONDA CBR600RR, HONDA X4, HONDA CBR600F, HONDA CB400SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F
Every time I get on the train, my eyes are drawn to it!
Master cylinder cap from antlion was installed.
There are four colors available, and I chose Black this time, although I hesitated between Titaniumium blue and Titaniumium blue because I don't like flashy feeling.
Replacement was an easy task that took only 5 minutes with a Phillips Screwdriver 1 pc and the included Hexagonal Wrench. (Material included in the kit):(Stainless Steel countersunk screws are of the hexagonal hole type, not the + type, so an L-Type Hexagonal Wrench is also included in the product, which is a very kind design.)
What I found when I installed it, 'My own eyes go well. (laugh) It's not so much that they stand out from the side, but that I can't help but notice them (laugh).
The texture is also of excellent cutting precision, as is typical of Antlion,
The finish is typical of Japanese industrial products.
"CB" is not printed as is often the case, but cut, so the letters "Shiningly" and "Shiningly" are not printed.
It is assertive and nice,
I hope my Review is helpful.
View detail
self-satisfaction
One pointAccent of self-satisfaction View detail
Fits: HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA CB400SB, HONDA CB400SF, HONDA CB750, HONDA CB900HORNET, HONDA CBR1000RR, HONDA CBR1100XX, HONDA CBR600F, HONDA CBR600RR, HONDA DN-01, HONDA HORNET250, HONDA HORNET600, HONDA NSR250R, HONDA RVF400, HONDA RVF750, HONDA VFR800, HONDA VTR250
Large human tint
I used to have a gold master cylinder cap from Speedora, but now that I'm getting older, I've decided to stop using anodized custom like a kid who just got his license, so I'm replacing various body parts. I am a large person like a child who feels lonely with OEM and I want to enjoy custom. I am a little worried that the anodized finish will fade over time as you say. (In fact, the Speedra GoldCap that was replaced was also faded.) 。 View detail
Fits: BMW K 1200 R Sport, BMW K 1200 R, BMW K 1200 S, BMW K 1300 GT, BMW K 1300 R, BMW K 1300 S, BMW M 1000 RR, BMW R 1250 GS Adventure, BMW R 1250 GS, BMW R nineT Pure, BMW R nineT Pure, BMW R nineT Racer, BMW R nineT Scrambler, BMW R nineT Scrambler, BMW R nineT Urban G/S, BMW R nineT Urban G/S, BMW R nineT, BMW R nineT, BMW S 1000 RR, DUCATI Multistrada 1200 S
Fluid cap
It's hard to put the Ring in the middle. View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB125R, HONDA CB223S, HONDA CB250R, HONDA CB400SS, HONDA CB650R, HONDA CB650R, HONDA CBR1000RR, HONDA CBR400R, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY S
Easy dress-up!
I bought it as a dress-up! I knew I wanted to enjoy the ride and be satisfied with the look of the car. The work itself is super easy! Just remove the screws, replace them with OEM ones, and install them again.
The DAYTONA is high quality and I was satisfied with its appearance and large size! I'm not sure if it's the price or the quality, but if you want to be satisfied with the look and feel of the product, please install it!
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, HONDA CBR1000RR, HONDA CBR1000RR, KAWASAKI Ninja ZX-25R SE, KAWASAKI Z1000, YAMAHA MT-10SP, KAWASAKI Ninja250SL, YAMAHA MT-10, YAMAHA MT-09, KAWASAKI VERSYS1000, YAMAHA MT-09, YAMAHA MT-09 A, YAMAHA MT-09 TRACER, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-03, YAMAHA FZ8, YAMAHA MT-07A, YAMAHA FAZER8, SUZUKI GSX-R750
good (quality)
Good color and quality. good for One point custom. View detail
One point casually
One point casually
(goods) self-satisfied
View detail
Fits: HONDA GROM, HONDA PCX125, HONDA XR100MOTARD, HONDA NSR50, HONDA CBR250RR, KAWASAKI Ninja250R, KAWASAKI Ninja250, KAWASAKI Z250, KAWASAKI Ninja250SL, KAWASAKI D-TRACKER X, KAWASAKI KLX250, KAWASAKI D-TRACKER125
The ruggedness is nice Parenthesis.
Dress-up parts are a matter of feelings. If it makes you feel good to put it on, it's good. I have not had any problems so far with the change from OEM that I am concerned about. View detail
Fits: HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA CB400SB, HONDA CB400SF, HONDA CB750, HONDA CB900HORNET, HONDA CBR1000RR, HONDA CBR1100XX, HONDA CBR600F, HONDA CBR600RR, HONDA DN-01, HONDA HORNET250, HONDA HORNET600, HONDA NSR250R, HONDA RVF400, HONDA RVF750, HONDA VFR800, HONDA VTR250
Faded and replaced.
I used to wear a gold cap, but it faded over time to a champagne gold or white, so I bought it from webike.
Since the amount of information around Stem is bothersome, I chose Black for this project.
I also bought a Red MASTERBand to match, and this combination was the right choice.
However, I am concerned that POSH's and Mukawa's Anodized Treatment fades very quickly due to ultraviolet rays. (Initial Adjuster&Stem Nut Cap is faded as shown in the 2nd and 3rd pictures, even though the Stem Nut is well colored...)
If it weren't for this, I would give it 5 stars. (Lol) 。
View detail
Fits: HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CB650F, HONDA CB650R, HONDA CB650R, HONDA CB650R, HONDA CB750, HONDA CBR1100XX, HONDA CBR600F, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000L Africa Twin
EasyCustomization
ScrewQuantity:The two components can be easily installed by simply removing them, and they are now visible while driving and look very much like a parenthesis. This is the easiest customization. View detail
Smaller Parts.
What made you decide to buy?
KOHKEN:Mechanical Clutch Holder to be compatible with RCSBrake master
[How was the installation?
I used Tweezers to attach the Mechanical Clutch Holder because the seal itself is small. Pasting is a one-shot job!
How was your experience with it?
I think it is more consistent with RCSBrake master. I would be happy if it were a little cheaper.
View detail
Surprisingly good.
I thought it would be halfway to Colorful if I changed only the lid, but I changed it to try it out. View detail
Fits: HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CB650F, HONDA CB650R, HONDA CB650R, HONDA CB650R, HONDA CB750, HONDA CBR1100XX, HONDA CBR600F, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000L Africa Twin
Up Fashion around Handlebar??
The installation work is quick and easy, and the coloring around the handlebar adds a fashionable touch. View detail
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA glom, HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA CBR250RR, HONDA VTR, HONDA VTR-F, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA FAZE
"cool
Cool, but the O-ring is thick and deforms when tightened.
Oil oozes, although it is not clear if that is the reason or not.
View detail
Fits: HONDA Monkey 125, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400
Smooth shiny surface with sharp detail
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a chrome plated surface. About the feeling of use, Smooth shiny surface with sharp detail that fits in with the styling of the bike better then the original plastic material rear master cap but is still a purely a cosmetic upgrade. Products to buy together, Some chrome plated rear shock absorbers like the ones available from Takegawa would be ideal to also add to your cart to help complete the look by removing the original red shock absorbers. Difficulty of installation, I can say the fitment of the rear master cap for my installation was very easy due to the ease of access and simple nature of securing the cap. Cost performance and comparison with other products, The pricing of the product is great. You receive a decorative cap made from a quality material with a matching finish. There are cheaper and more expensive options from other brands available but non of them have a chrome plated finish to match some of the other original chrome plated parts. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA MONKEY125, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400
Satisfied with good texture
Rear brake reserver tank was replaced with Nisshin's [Color] ClearTank (for Clutch) Purchased incidentally when I made a
Satisfied with good texture
I also use this Type for the Cap on the front side Brake, so it gives me a sense of unity.
View detail
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA glom, HONDA FORZA250, HONDA CB125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA FTR223, HONDA CB223S, HONDA CBR250R, HONDA CB250F, HONDA CBR250RR, HONDA VTR, HONDA VTR-F, HONDA CBR400R, HONDA CB400F, HONDA 400X, HONDA FAZE
I like the colored GuardCover.
Install the diaphragm so that it does not bite, but this is not particularly difficult. Since the installation is changed from a cross screw to a hexagonal screw, be sure to install with the proper torque so as not to overtighten.
I was a little concerned about the fact that it says "Made in Taiwan" and "Parenthesis" on the lid.
I have been using it for over a month now and have had no problems with it.
View detail
Fits: HONDA NC700S, HONDA GL1500GOLD WING, HONDA GB250 CLUBMAN, HONDA CBR600RR, HONDA CBR600F, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB750, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB1300 SF, HONDA CB1100 RS, HONDA CB1100 EX, HONDA CB1100, HONDA CB1000 SF (Big One), HONDA CB-1, HONDA HORNET600
The old master cylinder cover was really bad
There was a master cylinder cover that was completely different from the concept of the existing bike. It was neither aesthetic nor functional, and there was no reason to keep wearing it. So I decided to install a new one and searched on Webike. I am grateful to have found such a good product, and I will have to buy more in advance. -------------------------------------------------- -------- There was a master cylinder cover that was completely different from the bike's concept. This was neither aesthetic nor functional, but there was no reason to keep it. So I decided to install it and searched in Webike. Thank you for finding such a good product, and I should buy it in advance. Powered by Google Translator View detail