Reviews
Fits: KAWASAKI 1R, KAWASAKI GPZ900R, KAWASAKI KR-1S, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 2, KAWASAKI ZRX1100 2, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI ZRX400 2, KAWASAKI ZRX400 2, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZX-12R
High quality and satisfactory
It is used for front brake caliper for BMW R1150R. Although it was not applicable, it was the same caliper made by Tokico, and I judged that I could use it after seeing the shape in the picture. I bought it for the improvement of the maintenance and the appearance against the OEM which tends to become rusty and the movement becomes reluctant. Until now, every time I cleaned or replaced the pad, I had to remove the rust, polish the surface, grease it up, wipe it with a cloth and install it. It may be said that it is not so much work, but it is nice to have clean parts forever. I am satisfied with the high quality. View detail
So it's consumable.
The current second generation BremboCasting caliper has been in use since July of 2013.
In about 8 years, it has been in operation for 120 days and used for about 15,000 km.
The maintenance of the brake area is just cleaning the disc after each run, and I have not done the usual maintenance that everyone does, such as taking apart the calipers and removing the pads.
Even if Beta pin had fallen off, I did not care about it so much because Pad pin was pressed in, but when I removed it to replace Pad spring this time, the corrosion was more severe than I expected. ・・・・
I was going to lightly polish it and reuse it, but then I decided to throw in the Brembo OEM Pin that I had in stock.
It was easy to remove the pin from the reverse side by tapping the thin HEX tip with a hanghang.
Installation was also a little tapping and then press fit with WaterPliers. It is easy.
I sprayed the new Pin with AZ's quick drying Silicone Spray and lightly wiped it down before installing it.
I'm happy with the cleanliness.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
easy mark
Used for KLX125
Compared to the OEM, the screw mountain part looked smaller, but I was able to install it without any problems.
It's just the right length without the excess length that other people have mentioned.
The rest depends on how rusty it is and how fast it wears out.
At any rate, it is worth using this kind of Parts supply because it is very nice!
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Used on D Tracker 125 rear caliper
It's just to keep it from rusting and to see if it will move better. The quality is good, so there is no problem. View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Installation of RVF400 NC35 DAYTONA Stainless Steel Pad Pin Set
I installed it on my RVF400 NC35. size is same for rear side, but front side is 1cm longer. (No problem in use) 。 View detail
Very light.
Quantity:1 Set for 1 Vehicle
It was a mystery, but it came in two bottles!
The shape also seems to be the same shape as OEM
If you want to install it on a Yamaha SumitomoCaliper before it became a MosCaliper, this one for the FZr1000 should be fine.
Also, it came with a βPin, thank goodness!
As always, I'm amazed at how badly WeBig displays their products!
This time 2Quantity:I bought a set and will install it on my XJR1300 and FZ750 rear caliper.
We will also report any problems such as not being able to install
View detail
Fits: HONDA CBR929R, HONDA HORNET, HONDA RVT1000R, HONDA VTR1000SP-1, KAWASAKI Ninja ZX-6R, HONDA CBR900RRFire blade, HONDA CBR600RR, HONDA CBR600Fy, HONDA CBR600Fx, HONDA CBR600FS1, HONDA CBR600F4x, HONDA CBR600F4i, HONDA CB400SF HYPERVTEC SPEC-3 REVO, HONDA CB400SF HYPERVTEC SPEC-3, HONDA CB400SF HYPERVTEC SPEC-2, HONDA CB1300SF, HONDA CB400SF HYPERVTEC SPEC-1, HONDA CB1300SF, HONDA CB1100
Rustproof, but lickable.
It's been a few years since I replaced it when the OEM rusted out.
Naturally, there is no Rust whatsoever.
The only thing is that the hexagon bites into the head.
So, if you use Caliper for a long time, the hexagonal hole will be licked, so you might want to choose Titanium if you frequently maintain Caliper.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Fitted Exactly
I don't know how it feels to use it, but I bought it because I thought it would make maintenance easier without having to worry about Rust.
On my MT07 2016 without ABS, I have no issues at all with installation.
View detail
Pad pin
It's easier to grab and has a better texture than the OEM bremboPin. View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Convenient
I use it on my RearCaliper.
I wasn't looking for firmness, but to use a slotted screwdriver.
I didn't like it, so I replaced it.
Thanks to this, I can use it without worrying about licking it.
View detail
Wow that's cool
I bought this for Brembo. It's hard to tell the performance, but I like the beauty of the color and the shape. It's easier to pick up than the standard pad pin, so maintenance will be improved. But the price is a little high. ・・・・ If it is a little cheaper, it is the place where I want to introduce it to this and that. View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
I appreciate the setting itself.
This is a Brake PadsPin from Daytona for Nissin.
I purchased this because I had tamed the NORMAL Pin, but because it is Stainless Steel, the texture is good, and because it is naturally an Exclusive Design, I had no trouble installing it. I grease it up well, but I think the result will be tested again when it is removed.
View detail
This is a must!
Since the Pad pin that comes with the CP2696 Caliper is like the Split Pin, I bought the Quick release pad pin without having to install the Caliper.
If you're going to be doing frequent Maintenance, this is a must.
It looks GOOD!
View detail
than Split Pin.
Rather than a well thought out product, it's more of a question of why the OEM is so appropriate.
Quantity:Some say that using a 2pc crutch pin is better serviceable, but for now, you should at least use what you can call a Pad pin of this type.
The first time I saw the OEM Split PinSpec. I remember the first time I saw it, what a random person maintained it. I remember being stunned by it.
View detail
Let's replace it once in a while.
As we all know, the Pad pin wears out and dents the contact area with the Pad, so sometimes you can't do that. It's a good idea to replace it, as TitaniumPin is prone to wear and tear. I think OEM Pin is safe. By the way, but brembo's β Pad pin of the type that stops with Pin is the βPin. beta;Pin's Wiringmust. Brembo has announced that they should do the same. I am. If you don'tβPin off→Pad pin off→Pad dropout& rarr;good-bye, with Corner after Willy without Willy. I know of an example of a no-BrakeCrash. View detail
Fits: HONDA CBR929R, HONDA HORNET, HONDA RVT1000R, HONDA VTR1000SP-1, KAWASAKI Ninja ZX-6R, HONDA CBR900RRFire blade, HONDA CBR600RR, HONDA CBR600Fy, HONDA CBR600Fx, HONDA CBR600FS1, HONDA CBR600F4x, HONDA CBR600F4i, HONDA CB400SF HYPERVTEC SPEC-3 REVO, HONDA CB400SF HYPERVTEC SPEC-3, HONDA CB400SF HYPERVTEC SPEC-2, HONDA CB1300SF, HONDA CB400SF HYPERVTEC SPEC-1, HONDA CB1300SF, HONDA CB1100
It's expensive, but … good
i used it for cb400sb I don't feel that it became so light in part Single Body, but I think that the occurrence of Rust etc. disappeared However, I think that the occurrence of Rust etc. has been reduced Moreover, the wear of with Stages is also less
It's pricey, but ( cb400sb requires 4 pieces) Things are good
View detail
Convenient
I used to use a split pin, but it was very hard to replace the pad, so I bought it!
Quick ReleasePat pin makes it easier to replace the pads!
It would be nice if the price was a little lower
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
For a little Maintenance Free
These are the front and rear normal calipers for CBR400RR/NC29 It is used in many middle class on road motorcycle of Honda Nisshin's PinSlide-style single-pod Caliper and Rear's 1-pod It is used for Caliper The model number is 32991
The PinPlug that comes to prevent the OEMPad pins from falling out is slotted The reason why it is easy to stick and lick is because it is a screwdriver type You are all correct 80% of the purpose of my replacement was to make this lid removable with a hexagon
OEMPad pins are made of steel and have rustproof coating, but they are not Grease as the Manufacturer also recommends regular replacement Coating peels off and becomes rusty The one I was using was also slightly worn with Stages The Steel Pad Pins are expected to be more durable, at least in terms of rust In addition, the OEMPad pin was also used by Grease up In addition, the OEMPad pin was also used with Grease up was virtually unchanged, and as for the Rear, it was quite rusty and rusty, so the Fee Ring It became smooth and Brake noise was solved Rear caliper is a modest part, but it seems to be worth maintenance I'm glad I changed it because I've had a lot of rusting and sticking due to the rainwater roll-up of the rings
Front caliper seemed to have a little long dimension, but it was not interfering with the Wheel So it's not a problem, and it's just size for Rear
Basically, I'm happy with it, but for a Stainless Steel bar, Cost The performance is one more thing
View detail
Fits: その他 4POT caliper, その他 , その他 , DUCATI MONSTER900 DARK, DUCATI MONSTER900 CITY, DUCATI 900SS, DUCATI MONSTER900, DUCATI 916MONOPOSTO, DUCATI 916MONOPOSTO SENNA
mast by when purchasing a brembo4POTCaliper!
the brembo4POTCaliper's OEM Pad pins are too hard to talk about I think it is highly cost-effective in terms of maintenance
If you're in We-Big, please Recommends a combined purchase!
View detail
Split Pin is basic, but …
I actually don't trust it in terms of performance I use it only as an interim The Split Pin of the DeFault is disposable, so every time I change the pad or maintain For course driving, put in the split pin Yes View detail