Reviews
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000
The product photo and the actual product are too different.
The product picture is too different from the actual product received.
Notes. The photograph is an Image and may differ from the actual product. I think it says something like that, but it is too different.
I paid almost 9,000 yen expecting to see a picture of the product, and this is not what I got.
depending on the person "There's R&G." And "It happens all the time with R&G." It is said that the WeBig side of the product listing
I think it's a problem, don't you?
Please compare the product photo with what you actually received.
The picture was taken at Image..." I don't think it can be done.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R3
The appearance of the thing that arrived was wrong
The item is to stop with the Bolt made of Gold genus from the back, but the item that I received is a thing to stop from the table, Bolt was Plastic instead of Gold genus.
That's too bad.
View detail
Fits: BMW R1200GS, BMW R1200GS, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200R, BMW R1200RT, BMW R1200R, BMW R1200RT, BMW R1200RT, BMW R1200RT, BMW R1200RS, BMW R1200RS, BMW R1200RS, BMW R1200GS, BMW R1200GS, BMW R1200GS
Misrepresentation
It is not what I saw from the top Away from the side Bond suddenly aged odor Wound If it is hidden level I think somehow Fitting is good If it is cheaper View detail
Fits: TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER
Material is good but can not be installed.
I bought it for TIGER 1050, but I can not stop Screw as it is because the tip of STAND does not fit. There was no notice that it could not be installed unless it was cut. View detail
Fits: SUZUKI BANDIT650(GSF650), SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1200
Bandit1250 (NAKED) For, Corresponds to all models. is not.
I bought it for Bandit 1250 k8, but when the thing arrives the box is Small Apparently Bracket Only - - -
Since Bandit is a Reic Fender integrated License Plate Bracket, it should be exchanged for every Rear Fender if originally.
Looking closely at the outer box, I returned it because it was a for Naked Model at MODEL after 2010 and still and.
Although I reviewed the thought as if I mistakenly checked the product page, there is description in the item details column after the 2010 formula, but there is description in the column of conformity model is Bandit 1250ALL MODEL, so it is said to be confusing It is a typo..
It is too cheap if the price is with Fender and it is understandable if you think that the product photo is different, but please note those who are considering purchasing with BANDIT.
View detail
Fits: BMW R1200RT, BMW R1200RT, BMW R1200RT, BMW R1200RT, BMW R1200RS, BMW R1200RS, BMW R1200RS, BMW R1200S, BMW F800S, BMW F800ST
Sorry new article
It arrived finally in 2 months from the order whether it will be sent by sea.
Although it is brand new, because it was rubbing with the Plastic case of Package all the time,
The paint on the surface looks like a spotted pattern, so it does not look very new.
The accuracy of the installation was not a problem at all, but it was a very disappointing commodity.
Regarding the performance, it is because it is not overturned.
It is about 2 cm longer than NORMAL's Bar End.
Painted surface etc.. It would be better not to order those who care about.
View detail
Plastic case of 100 yen Shop
Since it does not match the shape of what you purchased and you can not do Bolt-on according to the Instruction Manual, you purchased Aluminum Shaft separately in DIYShop and managed to do it somehow. The texture is as good as the Pill case of 100 yen shop. One Side 4,763 yen for this, 9,000 yen for Both Sides. Things you do not need, with this quality this price. Moreover, any shape mismatch is bad. The appearance after installation is tolerable, so I wonder if I felt a little better. View detail
Fits: BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW HP4
Can not be installed as it is
Since it does not match the shape of what you purchased and you can not do Bolt-on according to the Instruction Manual, you purchased Aluminum Shaft separately in DIYShop and managed to do it somehow. The texture is as good as the Pill case of 100 yen shop. One Side 4,763 yen for this, 9,000 yen for Both Sides. Things you do not need, with this quality this price. Moreover, any shape mismatch is bad. The appearance after installation is tolerable, so I wonder if I felt a little better. View detail
Fits: BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000R, BMW S1000R, BMW S1000R, BMW HP4
It is cheap.
Purchased for BMW S1000R.
I used a third-party Core guard but I wanted Red and tried purchasing it.
Other company Material : Things of Stainless Steel are thinner and lighter.
Products nearly double the price of other companies are fixed Radiator and Oil cooler themselves (Pin) Although it is a structure to attach it by pinching it between, it is a feeling that it hangs by hanging suitably with in Hemp palmk at the part where the Radiator hangs.
Installation manual is not included. (Although it is not necessary)
Well? I just feel like passing in Hemp palm here.
In Hemp palmk can be cut someday and it is uneasy when it will cut off when considering vibration etc..
The reason for choosing this product is nothing other than Coloring.
I will not buy it when asked if I will buy it again.
View detail
Fits: BMW F700GS, BMW F700GS, BMW F700GS, BMW F700GS, BMW F700GS, BMW F650GS, BMW F650GS, BMW F650GS, BMW F650GS, BMW F650GS, BMW F650GS, BMW F650GS, BMW F650GS, BMW F800R, BMW F800R, BMW F800R, BMW F800R, BMW F800R, BMW F800R, BMW F800R
When opening the product, the frame was distorted overall
When opening the product, the frame is distorted as a whole, especially the Bracket which stops Screw was originally made into an L shape of 90 °, it opened to 120 ° and it was bent and distorted. Although it is not certain whether the packing was bad or the quality is bad, although it is originally returned Level, I wanted to protect the Radiator fins of Machine as soon as possible, because it was a product I had just waited long before I compromised Installed View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Design is good - - -
I installed in L6.
I decided it only by Design, but was sputtering at the time of cutting?
The painted surface is terrible.
It is a place I want you to do somehow even if you raise it a bit more.
View detail