Reviews
![Swingarm Spool (Stand Hook) (Off-set Type)[Cotton Reels (Offset)]](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0164/3235386_1_TS.jpg)
Fits: SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, TRIUMPH Thruxton 1200, TRIUMPH Thruxton 1200, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSR750, SUZUKI GSR750
It's easy to use with the size feeling there.
It was installed on the Swing Arm of DL1000 V-STROM650, and it is also used on DL1000 V-STROM1050XT after the vehicle replacement.
I used a V-Hook for my JTrip Rear stand, which makes it easy for one person to STAND-UP.
The included Bolt is a bit cheesy, but it's a Black Swing Arm, so it matches the Black body.
View detail
![Tank Grips (Tank Pads) [Tank Traction Grips]](https://global.webike-cdn.net/photo/impression/33/33d438abad5ade2c4f0f7ffb26e938a5L.jpg)
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09
favorite
Speaking of Tank Pad, EasyGrip and StompGrip are the most famous ones, but I've been using R I love &G
Many of the same products made by other companies feel like THERubber, but this one might be called luxury It feels very solid
It's painful because the knots are caught on the Large and Pants, but this one has more protuberances It's fine and grips softly
The price is reasonable and I recommend it
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09
GOOD
I installed this on a 2018 MT-09SP
Material:It's plastic, so it doesn't feel as luxurious as other companies' products, but the function itself is not a problem at all It is not
Installation Instruction Manual is included, but the WhiteBlack photo is not included It's in a foreign language so I have no idea what it says
In the meantime, if you don't want to damage the area around the exhaust pipe, I highly recommend it
View detail
Exactly、Refreshing。
It is the OEM Exhaust System Correspondence, but I installed it in my 959 and The accuracy of the SCPRO subject's Slip-on Silencer is not very high It fits You wouldn't do Tandem in the first place, would you? This Motorcycle is the way it should be
It is for the 959, but it is treated as an OEM Japanese Vehicle Inspection Correspondence's AXIS Lapo Slip-on Silencer for 1299 It's also directly attached to the 1299 (which will be installed on the 1299 but will not pass inspection)
I think it can be used for the 1299 However, this Bracket has 959 Paint, not Paint I just wanted it to be a Sticker and made to the User's liking Even if it's a little expensive, Material:If it's Carbon, the texture will be even better
View detail
Garbage for $6,000
Texturing's Rubber Board, which is thin, hard and not particularly slippery
It should be dedicated to the car type but I don't know how to fit it to the Tank But this is the same as Universal
I tried to cut it to fit, but halfway through I lost track of what I was doing and threw it away
It's just a matter of what Western manufacturers make & hellip; anything you can put up! I can see a thought like that
Items that do not suit the delicate sensibilities of Japanese people
You can make a pattern by yourself and buy a stencil of Urethane or Rubber at Homsen
You can make it for a tenth of the price
View detail
Fits: YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA XSR700, YAMAHA XSR700, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07
It comes in handy to hang a STAND
In my case, I didn't want the Protection feature, I just wanted to put it in STAND
Initially, I used the L-shaped catch, but the chain pull of the MT-07 interfered with this catch It is very difficult to STAND because it needs to be hooked up to the front of the car body
This Spindle slider and V-shaped receiver makes it fairly easy to apply STAND and Large Satisfied
View detail
shopping failure
By vehicle type [Color] I ordered Clear
I waited about a month for it to arrive
I don't know how to explain it
Quantity:Pair (for Left and Right) I don't know what's going on
Like Universal
Even if you try your best to make it stick, it's more like White Sulfur Glass than translucent
It was hard and the parenthesis was bad
I stripped it right off
Other Manufacturer's Universal was better
View detail
Not good
[Color] I ordered the Clear, but it was more white than translucent
It didn't feel like a Universal vehicle type
Too Hard, Quantity:Pair (for Left and Right) I don't know what's ahead or behind. lol
I did my best, but it came right off
I like that Manufacturer's Universal one
View detail
![Tank Grip Tank Pad [Tank Traction Grips]](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0220/22636839_1_TS.jpg)
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000
The surface is too slippery & too thin
It's only about 1mm thick and the surface is also very slippery, so it's not at all usable There is no Garbage
View detail
![Front Fender Extension [Fender Extender]](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0165/22823202_1_TS.jpg)
Fits: SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650, SUZUKI GLADIUS650650
I feel good
We arrived much earlier than we were told we would
Installation is done with double-sided tape and four Rivets, but the Rivet I processed it because I didn't want to use
The curvature with Fender was a little different, so I used HeaterGun to adjust the curvature and put it on We used strong double-sided tape on the entire surface to which it is attached
It's still early days after that, so I'm worried, but for now, I'm sticking it out and sticking it out It is
For me, though, I wish it was a little longer if possible
Since it is the same manufacturer as the Radiator guard, Total It's called "coordinate"
View detail
![Radiator guard[Radiator Guards]■](https://global.webike-cdn.net/photo/impression/12/12631857e1c2ce04a8ee9fa404ceaa0eL.jpg)
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Green Light is surprisingly obvious
I used to ride a Ninja 250 with Green Light's Core guard I've been looking for the same customization for my 6R since it was my favorite I did It's a bit pricey, but it's surprisingly noticeable and I like the way it looks However, the Tie Wrap fixation of the upper part when installing it was Large strange, and the glance is not the same as the one at first glance I don't know, but I'm somewhat disappointed in the fact that it's either Tie Wrap or &hellip (Lol) View detail
![Front Fender Extension [Fender Extender]](https://global.webike-cdn.net/photo/impression/be/be51a66a783af78f28dec7a2ae35f7ceL.jpg)
Fits: KAWASAKI Z125, KAWASAKI Z125pro
After use in the rain
It has finally rained since it was installed, and the road has been puddled with water
There was no Instruction Manual available
Normally, we drill holes in the Fender and Body and use the included Clip (？) The recommendation seems to be to stop at
I left no holes in the fender when I installed it, and I put the overlapping part of the Normal fender on the 3M outdoor fender It is attached using only double-sided tape
I went through a few puddles and it was much less splashing However, that doesn't mean your shoes won't get splashed, so you should avoid the puddles as a rule
The Double-sided Tape did not come off at about 50km/h
Z125PRO is used for the engine and exhaust pipe in Normal fender If you ride to work, etc. on a rainy day, you may have to install the exhaust pipe If you can agree on the delivery date and price, you can install it
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Small
It's pretty Smallish (lol) when I installed it Of course, I don't want to be taken care of, but you won't know how well it works until you roll it
Bolt seems to be somewhat cheesy
Installation is easy, no need to remove the Cowl
The instruction manual is in English
View detail
![Stand Height Bracket [Kickstand Shoe]](https://img.webike-cdn.net/catalogue/images/50737/22748760_1_TS.jpg)
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Good stuff, but expensive
When the Side Stand is applied, it is extremely tilted to Left for some reason I bought it because I felt uncomfortable that I didn't feel like I was standing on a stand, I had a good sense of security and accuracy, but it was a bit more Smaller looking is better looking View detail
Fits: DUCATI XDiavel, DUCATI XDiavel, DUCATI Diavel, DUCATI Diavel, DUCATI Diavel, DUCATI Diavel, DUCATI Diavel, DUCATI Diavel, DUCATI Diavel, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI DIAVEL
Can protect DAIVEL front fork
This Fork Guard can protect the front shock. And actually protect Ducati Diavel's front disc brakes. It has a reasonable price. But I can accept Compared to quality View detail
Fits: YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer
The shape is sharp as expected, and the appearance and texture from the Left oblique back is higher than expected
The OEM Chain Guard becomes the squishy shape of the shina When I was looking for the shape that the back side is sharp, the one close to the image was R&G When I installed it in the vehicle, I felt that it was too bright, so I changed it a little I've decided to use it because of the longer Guard range on the Driven Sprocket side (a good thing I cut it because it is not my favorite Considering the balance of Parts of the body, I used the hidden part of Swing Arm as a border I painted the front side in matte black In order to install, in order to make the position of the Guard against the Chain line feel good, I repainted it at the back The 3mm Spacer is inserted between the Swing Arm and the Guard (I think there is an individual difference.) View detail
Fits: MV AGUSTA Stradale 800, MV AGUSTA RIVALE800, MV AGUSTA RIVALE800, MV AGUSTA RIVALE800, MV AGUSTA RIVALE800, MV AGUSTA DRAGSTER 800, MV AGUSTA Stradale 800, MV AGUSTA Stradale 800, MV AGUSTA Turismo Veloce 800, MV AGUSTA Turismo Veloce 800, MV AGUSTA Turismo Veloce 800
Not a Fender Eliminator
MVAGUSTA Rivale, Strada-les, F4-BRUTALE and Turismo The license plate common to all Veloce brothers fits in the same place in Compact It is not for relocating to the tail lamp or tail cowl part because they are Parts The product description and images are so simple that they could be mistaken for a Fender Eliminator I will be happy to do so View detail
Fits: MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE675
It's solidly made without feeling like an afterthought
Purchased this product to reduce Core deformation of Radiator and Oil cooler
I am very happy with the solid construction and the Oil cooler can be guarded
View detail
I'm not at all interested in buying it at list price, but it's a good one
The shape and the Material are ingenious, but it's just Rubber (Vinyl?) Seat It is
I doubt that it costs between $5,000 and $10,000 depending on the product
I happened to get an Outlet item at a super unbeatable price, so I bought it
The product color is "[Color] Clear" However, if you put it on the white body, you can see that it has a slight blue tint to it
To be honest, it's a little disgusting, but it was cheap, so I'll compromise
Unlike products with a warty surface, like Sugar Crystal's Paper File the textured but flexible material, so that the wearer can be rubbed It's not as much of a decrease
Even though it is flexible, it is not as flexible and stretchy as other products, and it is not suitable for applying to curved surfaces It takes technology and environment
If you can't use the Dryer or Heater, you need to work on a day when the temperature is over 20 degrees Celsius Adhesive strength of the product Hardness It won't stick well and it will peel (float) off, losing to
It requires quite a bit of strong pressure dressing, and in my case, the final "The Wooden Grinder I gobbled it up with
There is no problem because it is ZX-10R of the Iron Tank, but the R1 of the Aluminum Tank and TitaniumTank's CBR-RR doesn't do this method
The grip feeling is good, and it's thinner than the warty products, so it doesn't feel uncomfortable
The ultra-acceleration of the liter SS reduces the chance of the body being carried backwards, allowing you to drive aggressively to
One Side is Quantity:It is divided into 1 Set of 3pcs. and the top one, which contributes little to the knee grip Quantity:I didn't understand the purpose of the 1pc. until it was fully accelerated with the sticky down
It was meant to hold on to the Tank between the elbows and the W
View detail
Fits: HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200
It is easy to install
Prevents falls from caving in on gravel roads and asphalt on Side Stand
However, sand and other small things can get inside..
View detail