Reviews
I was able to install it without trouble to CB 400 SF.
Before installing this product, there was Made by HURRICANE 's SS Size and I attempted to fit it, but the Clamp part struck the Brake master and it was only possible to mount it obliquely.
We also saw information that if you are watching Brace's information on Net, you can not install it straight even with products from other companies.
However, since Brace made by ALCAN hands has Hinge as one part of Clamp part, it does not take too much space and the Brace bar itself also adjusts the length, so it can extend to Length of Limit that does not interfere.
The thickness of the bar is also 22. Installation of Attachment is easy with 2 Φ.
It is a complaint-free product!
View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
Although it is a good Grip, it seems that the wall thickness is a little thin
For Handlebar with diameter 22 mm, Quantity : 2pcs. (for Left and Right) , For Right corresponds to Throttle sleeve so the inside diameter is about 24 mm. Grip inner length is about 125 mm.
Because it is a Rubber integrated type, feeling peeling in hands held by a plurality of Rubber molded products, - There is no turning feeling. In addition, the surface is slippery and easy to operate Grip.
However, it seems that the feeling of grasping was a little slimmer because the wall thickness was slightly thin. Also, I feel that I wanted Cushion and softness for vibration a bit more, but I think that the area around this is a place where evaluation can be divided depending on personal preference.
Still from a very cheap point, it is a good Grip over the price.
View detail
Length adjustable
First, you can adjust the length.
Second, all black.
This item was able to clear the above conditions.
Easy to install, φ22. You can install 2 Mounts.
View detail
Old car ExactlyBrake hose
I used it for Front B of GB 250. OEM Product is 730 mm, but + 20 mm was exactly Length. Because it is an old car Mesh hose does not suit, Material : It was the best match because I was looking for Rubber. View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400
I always use it.
ZEPHYR is said that the Clutch Wire will expire.
Until now, I have used OEM, but I have never run out.
Mesh hose is beautiful, and making is also good.
Ultra Violet etc. when used for many years. The Clear division is dull at.
Conversely, regular replacement is taking place there as a guide.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Attached to the MAJESTY
If it is an OEM grip, if you are cloth-based gloves you will slip and slippery, so we chose the item here.
Feeling is comfortable with SOFTIE, slip prevention is also outstanding.
Grip itself is also much thicker than OEM and gripability has also improved.
Even regarding installation, especially Large strange things never got installed.
I think that I can recommend a product.
View detail
Our Bird is - - -
Is it due to Combination brakes in the Wire formula?
LeftBrake is far and Right (Front) Brake is
Because it is close, when you do Brake both something Tiguhagu
Because it will become so, to compensate for it Right only
I installed it..
Neutral detergent + plenty of water, soaked in
Do your best and install it! It will be somehow ^ ^;
After attaching, even if I turn around, thinking to remove it
It has not been such a thing properly stopped
There is also softness of Sponge, so it is Brake
There seems to be no obstacle factor, so you can use it with confidence
It was cheap shopping ~ ♪
View detail
As an alternative to OEM Parts Number
Because OEMCable is expensive, I bought this product.
Because it was Manufacturer who can not hear it, it was uneasy but can be used without problems.
Regarding durability, I am praying that it will not cut immediately although it is still unknown as it is still in use.
View detail
Handlebar Ideal for narrow width vehicles.
It attached to FiMODEL of YBR 125. Because this car has a narrow width of Handlebar, I purchased this item because I could not install it on Posh's Handlebar Brace which I bought before this item.
Compared to Posh, making details is slightly inferior impression, but enough. Voltmeter and NavigationMount are now installed, I am happy with the change of living convenience.
View detail
ALCAN hands: Bar End RAINY
Because I exchanged Handlebar I was looking for something nice Bar End where I was looking for RAINY of ALCAN hands (Plating) I found. The price was not high, the making was solid, and I was able to do a good shopping. View detail
To make Blinker LED.
This product prevents high flasher by wiring an interrupt between Harness and Blinker when making Blinker an LED.
Simply as many as Blinker are needed, but Quantity : Since two sets are in one set, if both before and after Quantity : 2 Set, if only before or after Quantity : 1 Set is enough.
You can understand how to install it by looking at the back side of Package.
From the kindness, Bullet Terminal was attached in advance, but in my environment it was too thin to use it, so I had to change it to Emon which I had.
(Do not bundle it without installing it)
Also, "Close the Bolt to the Gold genus part of the car body" And BodyHeat sink has two holes, but in Screw for Motorcycle it is big in diameter and does not fit in the hole of this product. (Both holes have the same large hole. )
I, Screw on hand, Nut for PC with matching diameter Is it the base of the motherboard? I managed to install it.
If this hole is more Large, it is very disappointing that we can fasten it together with Bolt of the car body. (Manufacturer was also going to do so, is not it?
Bullet Terminal and mounting holes were a little troubling, so we reduced ★ by 1.
Activation itself works without problems, so do not worry as Bullet Terminal replacement code is longer.
View detail
Satisfied with this price
【What made you decide the purchase?】 TODAY 's Grip decided to exchange for curing and sliding.
【How was it actually used?】 The pattern similar to OEM and Rubber gently grips feel very good.
【Was it difficult to install? (Hard parts case)】 Quantity : Pair (for Left and Right) Large dress is also nearly best so removing the old Grip is easier to remove.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Bond puts a small amount on the Grip side and pushes it, it spreads to the whole. If you attach Bond to Handlebar it is easy to protrude.
[Is there anything I was disappointed about?] Nothing in particular.
【Hope for Manufacturer - Please let me know if there are any improvement points】 I want other colors to come out.
【Have you compared items?】 Compared with other company's products and OEM Product. This product was the lowest price in Design near OEM.
[Others] Rubber is soft and easy to install, and Grip feeling is good, but deterioration seems to be early. I think that it is better to exchange immediately as this price deteriorates.
that's all
View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
Excellent COSPA!
Along with Bar handle of 4stjog, I chose this Grip because I wanted to keep the shape good and cheap by Penetrating formula, but I am satisfied with the goodness of Cost performance attached!
It feels thin but easy to grasp with a feeling softer than jogOEM The standard shape seems easy to fit with any Bar End.
I did not use a special adhesive, but it seems that it got securely.
Also, because OEMThrottle pipe has a step or Decoration Boko for slip prevention, it is thin because it is attached as it is, so it got bogged down and it was possible to install it normally by scraping down the Decoration Boko of Throttle pipe. I think that those who are troublesome to process can be purchased with High Throttle Pipe.
Because it is cheap, I thought that it was a Grip that seems to be able to respond with early Repeat as it gets dirty.
View detail
Good to make
Design, accuracy is good.
Adapter is attached to fit various inner diameters
I do not need help.
On the Axel side, resin Washer is also included so as to prevent contact with Grip and is kind.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Large satisfied with this price?
NINJA 1000 had a slight vibration, the arms became numb in long distances and I was considering exchanging Normal grip, I saw this Impression of Grip and decided to try it. My hand is Large, the thickness of the Grip that everyone else is exactly good, the micro vibration is suppressed along with the exchange of the Grip end, I would like to repeat this price.
Reduced by one star, because it smells ruby.
View detail
Normal handle with One point's Dress-up
Dress-up installed for the best purpose.
Since we changed Meter visor, HandlebarTrim to Black, we also set Brace to Black.
It was a design mission but it is a pleasant miscalculation with the feeling that Handlebar rigidity has risen more than expected. It was good because there was no Wobble who pointed out other people.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Thick
It is used for BMW 1150 RS. From the OEM's Yoreyore Grip, I changed to Domino, it seems to be holding a steel stick as if I was holding it, and my hands hurt in touring use. I bought it because it is a thick Grip. The result has become easier to make a mistake.
I think that it is exactly right for Motorcycle of forward tilted posture type. It will be much easier to walk around. It is not absolute when it comes to Sports use. Grip is natural, but it is quite. I think whether to use a lot for using.
View detail
For good price, good texture.
I was satisfied with the firmness made by price.
For Pipe Handlebar, a bit of ingenuity may be necessary to attach Separate handle.
Just right width and weight.
View detail
Easy Makeover
Purchased with Handlebar Grip of ALCAN hands.
Color and texture are also quite good.
Installation worried a bit at first, but it is easy if you understand the structure.
However, I feel that it seems to be able to take off as soon as I hit this part somewhere.
It is a product that can be Recommendation if it is divisible as Dress-up parts.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Street Image
Buy OEMGrip because it is breaking. It is not very flashy, but Red at One point is a good feeling.
Although it was slightly long, the Axel side needed processing, but the installation itself had no problem.
As in other people's evaluation, the touch with bare hands is quite good.
There is a little dissatisfaction in making details, but it is not at Level which is worrisome if you consider the price.
View detail