Reviews
This is a highly Universal and standard design.
Material:This is a bar weight for AluminumHandlebar. As the seller explains, it seems to have the effect of reducing vibration transmitted from the vehicle body. It depends on the individual, but if you feel numbness in NORMAL condition, you may want to consider this.:We can purchase the AluminumSmoothFit bar with confidence only from the manufacturer. The appearance is also simple and can be used with a wide range of cars. View detail
It's soft, but I'm not satisfied with the price.
It's softer than expected. The price is not cheap, but the quality is excellent. It's good for the prostate because it only contains the gel around the hip bone. I wish the price was a bit cheaper. Very useful when traveling long distances. Shipping is fast. Made in Japan. no see. -------------------------------------------------- -------- It's more tight than I thought. The price is not cheap but the quality is excellent. Only the hip bones contain gels, so it's good on the prostate. I hope the price is cheaper. It is very useful for long trips. Delivery is fast. MADE in JAPAN. no see. Powered by Google Translator View detail
This was a necessary component for Handlebar replacement.
I was not familiar with the product and chose a product that many people had purchased.
The look is very normal, and since I had a Babyface Bar End on my STD Handlebar, I think I prefer Babyface for my personal preference.
I have yet to feel the effects of the vibration reduction. (I think he doesn't understand it because he rides less often and is a day trip Main…)
Note - After installation, when I tried to remove the AxelSlotPipe to replace it, the Rubber and Nut were left in the Handlebar and I could not get them out! I barely scraped out the rubber with a long stick and took out the nut with a magnet attached to the tip of a needle gold (without removing the handlebar). (Handlebar was solved without removing it). It may have already come off when I installed it. Be careful when turning it backwards.
Conclusion - The appearance is just personal preference. Vibration is also a novice, so you may get a good idea of the quality from this one.
View detail
To prevent Grip wear and tear.
I've used it on other vehicles, but installed it in case of Grip wear and tear.
I couldn't find a heat gun so I shrunk it with pod warm water.
View detail
Exactly while only a small amount of change
The STD Handlebar was slightly in front, so we installed it to slightly change the position.
The result was a satisfactory Position.
It looks and feels like a NORMAL place.
I'm glad I was able to adjust the Lever position a little bit.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Z1000 (water-cooled)
usually
I can't judge if it is good or bad because I haven't compared it with OEM. I installed the parts for appearance rather than practicality, but it is not bad. However, if I wanted, there are a lot of advanced parts on the top, and I am thinking of replacing them. View detail
Weighs close to OEM
I purchased this product because I wanted a weight close to OEM.
Vibration was definitely less than without.
A little heavier would be better for z900rs.
View detail
Fits: HONDA Monkey125 (MONKEY125), HONDA GROM (Grom 125), HONDA CB125R, HONDA CB250R, HONDA CBR250R, HONDA CB300R, HONDA CB150R, HONDA CB300R, HONDA CB150R
I think that it is a good product
They are inexpensive and can be installed without modification.
Clutch adjustment is now easy.
View detail
Fits: HONDA Monkey125 (MONKEY125), HONDA GROM (Grom 125), HONDA CB125R, HONDA CB250R, HONDA CBR250R, HONDA CB300R, HONDA CB150R, HONDA CB300R, HONDA CB150R
Easy to install, easy to use
It will be the cheapest product with the same functionality,
Installation - no problems with the feel of the product.
It is a very good product.
View detail
easy to ride
It is a very comfortable and safe Position for people with back pain. View detail
Improvement of Seat without Anya
I bought a Seat with Other Brand Product skin on my GSX1100S KATANA. I noticed after I bought it that it seemed to be very bean-crumbed, and the ride was hard, and the corners hit my inner thighs hard because of the original shape. I put in the Gel zab and made it so that it softens around the gills. I am highly satisfied. View detail
Fits: HONDA VTR250, SUZUKI SV650, YAMAHA MT-07
The shape I wanted.
Pipe Handlebars come in a variety of shapes and sizes from various manufacturers.
The EFFEX EFFEX Super Bar Superbike was Exactly in the shape I wanted.
This series has a line up of unusual shapes, so you may be able to find a shape you haven't seen before.
However, the manufacturer's website says it will be discontinued when it is no longer in stock.
Recommendations for early purchase.
View detail
Stable product.
It is used for XSR900.
I decided to buy this one, which I have purchased many times, because I had to replace the handlebar.
I don't want to say model change, but I would like to see Mat color added, etc.
View detail
Longer Ride time is also possible.
[How is it used?
I bought them because I want to ride my motorcycle for longer distances and longer periods of time without worrying about buttock pain, and also because when I ride a vehicle with a short distance between the footpeg and seat height, my knees bend too much and I want to alleviate that a little more.
[Was it as per Image?
The design and color are not at all eye-catching, so it does not stand out even if it is installed on a Seat. Also, when you touch the surface, the built-in gel is exquisitely soft and thick, so it is expected to be effective.
How was your experience with it?
It has successfully reduced buttock pain from riding for long periods of time and has created a little bit of seat height (just a little bit), which has improved the bending of my knees. I use it on my SUPER CUB on a daily basis and find it very convenient as it can be quickly removed when needed and installed on other vehicles without the need for tools, perfect for Asia production vehicles where seat and rear suspension tend to be set solidly.
[Points to note]
Because the belt is made long, the magic tape part may play depending on the shape and size of the seat. Therefore, the Magic tape part may come in contact with a part of the vehicle in some cases.
How did it compare to other products?
There are lower priced products available than this product, but this product seems to be better considering its effectiveness.
View detail
Installed on SV650X
The Urethane was not hollowed out, but simply laid down as it was, and was neatly implemented without any visible bumps.
The pain in my buttocks has improved dramatically, and I used to have such a hard time sitting in the office chair on Monday after riding full time on Saturday and Sunday, but that pain is now gone.
If you ride for 4-5 hours in a row, you will get pain from the pressure, but it is not Large pain, and the pain will go away as soon as you take a break for 30 minutes. Damage to the cells of the buttocks due to thrusting is almost Zero.
Besides the pain, there were three other improvements.
One is that the tilt has been eliminated and the seat surface has been increased, allowing the Seat to sit in its natural place slightly behind the Seat. This made it easier to apply load to the Rear.
Two, the Seat height increases, making it easier to fall over and crowd.
Thirdly, I am 177cm and the OEM was tight in the knees due to the close proximity of the seat and footpeg, but this has also been improved.
The OEMs are too much anxious.
Seat on SV650X is very bad.
And the Damage to the buttocks is egregious because the suspension is terrible.
(I'm writing drunk, so there may be typos or funny sentences, but you get the idea.)
View detail
A must for Downsas.
NITRONDown Sas and Quantities:Short Stand is a necessity for down suspension. Before the replacement, the motorcycle almost fell over when fueling the stand, but after replacing the short stand, I have no more worries. The nut was so hard that I gave up on replacing it myself and asked the shop to do it for me.
A must have for Short suspension!
View detail
Fits: HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four
Discontinued Hig is equivalent to 30mmUp Spacer?
I used a Gcraft 30mmUp Spacer for about three years because the handlebar on my late Grom JC61 was so low.
It was much better, but I was still riding without feeling 100% comfortable.
By chance, I had a chance to get a discontinued HighType, and I thought it would be good without the Handlebar Spacer. I thought it might be possible to use it without Handlebar Spacer.
We compared the height when we replaced it, and it was still almost the same height as the 30mmUp Spacer4.
It took some time to remove the existing Grip, but I managed to replace the Handlebar and ride it for a bit.
Definitely easier to ride than before!
No matter where I sit on the Seat, I don't have that feeling of being uncomfortably close to the Handlebar!
In other words, it fits tremendously well.
Perhaps it is important that the handlebar is not only raised, but also moved back a little.
I have a long upper body, so High is OK for me, but sometimes I think it could be a little lower. If you have a normal body type that feels the handlebar is too low, I think the current 7mmUp and 7mmBack will be enough to get a good seat position.
View detail
The pain in the buttocks was relieved, but ...
The vehicle in which it is installed is a Honda 400X. Sure, the degree of pain has lessened, but my sitting time is limited to an hour and a half.
For me, a height of 168cm, the 12mm increase in the seat height from 800mm has considerably increased my feeling of insecurity in terms of my footing.
Considering the cost performance, it was difficult to judge whether it was the right decision to purchase the items.
View detail
Easy replacement with Bolt On
I bought it because I wanted to ride a little more forward leaning.
As a motorcycle tinkerer, I was happy to see that the wires and cables can be used as they are, and that the Processed Switch Hole is a newcomer to the motorcycle tinkering world.
View detail
Reduced handlebar vibrations!
very happy with this purchase. previously i had a difficult time buying handlebar ends because they were mostly cosmetic, hardly any weight on them at all. (you need weight in order to cancel out vibrations.) and because most of this product is INSIDE the handlebar, is does not protrude too much out of the handlebar. (this is a minor cause for concern because if the motorcycle falls, the handlebar end will not have much protection. but the benefits of the vibration dampening outweight this.) View detail