Reviews
It got easier to ride.
As it is attached at the same time as Middlefootpeg, it is not an evaluation of only Handlebar, but it became clearly able to drive comfortably. Because the width is narrow and it comes to you, all operations are easy to do.
Installation was not evaluated as it was Shop.
View detail
It will suddenly change. Recommended.
I was wondering about purchasing without becoming familiar with ForwardPosition, but as this product came out, I purchased Xdiavel. It will not become Rear Sets, but it will be close to the Position of NORMALNAKED, so stop on Corner, change Shift etc.. Merit is quite a lot. It was said from the fellow Harley ride that it seems to be cramped, but this Position is better able to beat down without anxiety.
Since installation was Shop, it is not evaluated.
View detail
I really like this item and i'm totally happy for the Japan weblike services . The staff here was fast and kind. I will buy again on this web site .
I really like this item and i'm totally happy for the Japan weblike services . The staff here was fast and kind. I will buy again on this web site . View detail
Fits: DUCATI 999, DUCATI 749, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 748, DUCATI MONSTER Series, DUCATI 999, DUCATI 749, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 748, DUCATI MONSTER Series
When a Motorcycle was purchased in medieval times, since the Clutch cover had been opened, it was dramatically noisy, and purchased for the purpose of the noise reduction. The goods were dramatically light, and as a result of equipping, it was thought th
When a Motorcycle was purchased in medieval times, since the Clutch cover had been opened, it was dramatically noisy, and purchased for the purpose of the noise reduction. The goods were dramatically light, and as a result of equipping, it was thought that noise also became Massey very well. However, the path of the Bolt hole of the sent goods was not small, a Bolt did not enter, and it was not able to equip as it was. Were they inferior goods although extended and attached with the Drill? It was somewhat regrettable. View detail
It purchases by a trial for what kind of goods or a check. Since it can use in addition to and that is right, it is for a purchase candidate. -- however, an inner side (receptacle side) tends to be made -- that of ゃっちい -- a few -- disappointed
It purchases by a trial for what kind of goods or a check.
Since it can use in addition to
and that is right, it is for a purchase candidate.
-- however, an inner side (receptacle side) tends to be made -- that of ゃっちい -- a few -- disappointedly .
View detail
Fits: DUCATI MONSTER S4Rs [Monster]., DUCATI MONSTER S4R [Monster]., DUCATI monster s2r1000 [monster]., DUCATI MONSTER S2R [Monster]., DUCATI MONSTER S4Rs [Monster]., DUCATI MONSTER S4R [Monster]., DUCATI monster s2r1000 [monster]., DUCATI MONSTER S2R [Monster].
Attachment required processing. Except the more detailed one to maintenance, I consider that it is better to ask SHOP. Form and texture are wonderful.
Attachment required processing.
Except the more detailed one to maintenance, I consider that it is better to ask SHOP.
Form and texture are wonderful.
View detail
Fits: DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1198, DUCATI 1198S, DUCATI 848, DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1198, DUCATI 1198S, DUCATI 848
A recommend is carried out to those who are used by a circuit, long touring, etc. I can regard the talk and the individually standard screen which were revealed as smart. It is tired with a pure screen very much as to why I chose this as the thing
A recommend is carried out to those who are used by a circuit, long touring, etc.
I can regard the talk and the individually standard screen which were revealed as smart.
It is tired with a pure screen very much as to why I chose this as the thing at the time of high speed steel peat touring,
Since it was the sales start of when [ which was regarded as whether the screen currently used by the racer of delight which found it when looking for the tall screen is sold ], it purchased.
Although appearance is eye screen height like an old durable racer, an effect is greatest, and if it hides in a screen, it will be very comfortable.
View detail
When it has ridden on the motorcycle with a cowl, the work which removes a cowl is very troublesome. Although it will not be so troublesome if it is also an electric driver, then, it is not connected with fundamental solution. If it carries out, d
When it has ridden on the motorcycle with a cowl, the work which removes a cowl is very troublesome.
Although it will not be so troublesome if it is also an electric driver, then, it is not connected with fundamental solution.
If it carries out, does it come what to be able to perform early the work which removes a cowl comfortably?
It is for solving it here! delight: It is the quick fastener ! When this product fixes a cowl, it is used instead of a screw.
When it fixes with a screw, and when it fixes using this quick fastener, what is different?
When the cowl is being fixed with the usual screw, it is necessary to remove enduringly with a driver.
But when it is fixing by this quick fastener, it will be able to remove only by twisting with KUITSU by what and one hand.
If it is this, the work at the time of removing a cowl can carry out very quickly! Although it is such great goods, in equipping, there is a point to take care about.
Since it is the goods supposing the use to FRP or a carbon cowl, it is the point that wearing may be impossible for a thick pure cowl.
View detail
Fits: DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1198, DUCATI 1198S, DUCATI 848, DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1198, DUCATI 1198S, DUCATI 848
Although an order for CM composite was placed at first, the delivery date used this de LIGHT inner rear fender by calling it one month or more. I think that the bolt of being easy and the product made from a stainless is also attached, and that de LIG
Although an order for CM composite was placed at first, the delivery date used this de LIGHT inner rear fender by calling it one month or more.
I think that the bolt of being easy and the product made from a stainless is also attached, and that de LIGHT was used without a thing [ a thing ] a hang is of saying finishing etc. but, and attachment was good since when merely removing a rear tire etc. interfered with a fender.
View detail
Fits: DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1198, DUCATI 1198S, DUCATI 848, DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1198, DUCATI 1198S, DUCATI 848
Since dirt was surely conspicuous with the pure radiator, the goods here were purchased this time. The completeness of goods is very satisfying. Since processing of enlarging a screw hole was also unnecessary and it equipped with it satisfactorily
Since dirt was surely conspicuous with the pure radiator, the goods here were purchased this time.
The completeness of goods is very satisfying.
Since processing of enlarging a screw hole was also unnecessary and it equipped with it satisfactorily especially also when equipping, it is satisfied.
It is good in a price being merely a little cheaper.
View detail
Fits: DUCATI MONSTER S4Rs [Monster]., DUCATI MONSTER S4R [Monster]., DUCATI monster s2r1000 [monster]., DUCATI MONSTER S2R [Monster]., DUCATI MONSTER S4Rs [Monster]., DUCATI MONSTER S4R [Monster]., DUCATI monster s2r1000 [monster]., DUCATI MONSTER S2R [Monster].
The design which looks light is good! . The attachment to a swing arm has also been attached without processing by appropriation of the screw for brake hose fixation.
The design which looks light is good! .
The attachment to a swing arm has also been attached without processing by appropriation of the screw for brake hose fixation.
View detail
Fits: DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 748, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 748
Remarkable satisfaction of a design and the windbreak performance was carried out. Compared with a normal screen, a wind pressure is stopped considerably also in the about 40~60-km speed region of town riding. If it lies down for a while also in t
Remarkable satisfaction of a design and the windbreak performance was carried out.
Compared with a normal screen, a wind pressure is stopped considerably also in the about 40~60-km speed region of town riding.
If it lies down for a while also in the time of high speed operation, a wind will hardly come.
however, at the time of attachment, the hole of a bolt does not suit a nice condition but processing is unnecessary -- it is -- although -- power was needed for a while.
But I think that they will be satisfying parts if it attaches.
View detail
Fits: DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1198, DUCATI 1198S, DUCATI 848, DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1198, DUCATI 1198S, DUCATI 848
Although a bottom tended to attach a crack, the image of 1098R was considered and it was dared to purchase the bottom of carbon here. Although having been stained with a crack was unavoidable, it was considered that a clear was blown and carbon was no
Although a bottom tended to attach a crack, the image of 1098R was considered and it was dared to purchase the bottom of carbon here.
Although having been stained with a crack was unavoidable, it was considered that a clear was blown and carbon was not stained with a crack.
Although it had written Enlarge a hole according to the screw hole of a car body about attachment, the worries do not exist, either and the screw hole also suited well.
Although there was a small chip uncanny in some places, since the portion hid in the side cowl, it was not worried so much.
The quality of a plain weave is good and it is very much satisfied with the product.
View detail
Fits: DUCATI 848, DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1198S, DUCATI 848, DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1198S
They are a joke and a thought at carbon parts. It purchased. In the midst of having attached, the attached carbon and the parts which adjust the height of a car body have been lost. Since it is an inner side, the hand was put in, and the parts
They are a joke and a thought at carbon parts.
It purchased.
In the midst of having attached, the attached carbon and the parts which adjust the height of a car body have been lost.
Since it is an inner side, the hand was put in, and the parts were not made in fixation but it has separated from them as it is.
However, although parts did not fall to a ground surface and the car body was checked, it is not found after all but is lost.
The parts which were in the house somehow were able to be substituted and attached.
or a manufacturer to double-stick tape follows from the beginning -- some -- an adhesive bond -- like -- I want you to come out, and to carry out that correspondence somehow so that it can fix
Regrettable this time, because other products were good.
View detail
Fits: DUCATI 1198, DUCATI 1098R, DUCATI 1098S, DUCATI 1098, DUCATI 1198S, DUCATI 848, DUCATI 1198, DUCATI 1098R, DUCATI 1098S, DUCATI 1098, DUCATI 1198S, DUCATI 848
Appearance was thought as important and the plain weave was purchased. Since carbon is hard unlike the plastic of OEM, when attaching it, a crack attaches it on a tank simply. It will be stained with a crack if a tank is not covered with something
Appearance was thought as important and the plain weave was purchased.
Since carbon is hard unlike the plastic of OEM, when attaching it, a crack attaches it on a tank simply.
It will be stained with a crack if a tank is not covered with something.
And since the screw hole was small, the point which must be enlarged with a file for a while was troublesome.
Although appearance is good, since there is a place which must take care about attachment, it is Mitsuboshi.
View detail
Fits: DUCATI 1098R, DUCATI 1098S, DUCATI 1198, DUCATI 1198S, DUCATI 1098, DUCATI 999, DUCATI 998, DUCATI 996, DUCATI 848, DUCATI 749, DUCATI 916, DUCATI 748, DUCATI MONSTER Series, DUCATI 1098R, DUCATI 1098S, DUCATI 1198, DUCATI 1198S, DUCATI 1098, DUCATI 999, DUCATI 998
It exchanged for the clutch cover of 1098S. The point that other screw threads do not pass if the screw-thread location is shifted delicately (really delicately) and that it was worrisome lets one screw thread pass. It was able to let through and
It exchanged for the clutch cover of 1098S.
The point that other screw threads do not pass if the screw-thread location is shifted delicately (really delicately) and that it was worrisome lets one screw thread pass.
It was able to let through and other screw threads forcibly pass for the screw thread of middle first.
Probably, it is good to make a rubber washer blow, since there will be disagreeable sound of PAKITSU if torque is applied too much also when bolting a screw thread.
There is original good sound in a dry clutch after attachment, and since a design is also safe, it is a recommend for many people.
View detail
When it exchanged for the handlebar of the company, since it was needed here, it purchased together. Texture also becomes a one point and is well pleased with gold. Since bar end for exclusive use has come only out of this, I am just going to want
When it exchanged for the handlebar of the company, since it was needed here, it purchased together.
Texture also becomes a one point and is well pleased with gold.
Since bar end for exclusive use has come only out of this, I am just going to want you to increase a variation to a slight degree if I may be allowed to wish so much.
View detail
Fits: DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1098, DUCATI 1098S, DUCATI 1098R
It thought and purchased in carbon parts to the place seen most. Very easy only by attachment also removing a tape and being able to attach it. It is good-looking by having purchased twill, and the high grade feeling is very much satisfied.
It thought and purchased in carbon parts to the place seen most.
Very easy only by attachment also removing a tape and being able to attach it.
It is good-looking by having purchased twill, and the high grade feeling is very much satisfied.
View detail
Fits: TRIUMPH BONNEVILLE SE [Bonneville]., TRIUMPH BONNEVILLE790 T100 [Bonneville]., TRIUMPH Thruxton., TRIUMPH BONNEVILLE SE [Bonneville]., TRIUMPH BONNEVILLE790 T100 [Bonneville]., TRIUMPH Thruxton.
It purchased in order to feel the circumference of rear one refreshed, and it attached by DIY. Since sheets were normal state, the blinker and the LED tail lamp kit, and the color for normal seats were also purchased separately. In play [ of the f
It purchased in order to feel the circumference of rear one refreshed, and it attached by DIY.
Since sheets were normal state, the blinker and the LED tail lamp kit, and the color for normal seats were also purchased separately.
In play [ of the following ] is the comment which DIY beginners attached.
Although the wiring diagram is attached about attachment, since the color of wiring is not written, lighting confirmation is required by trial and error.
Moreover, I think that some, such as expanding with a drill, need to be processed since the hole for blinker stay attachment was smaller than stay.
(It is not that processing accuracy is bad.)
I think that the accuracy of the fender itself is good. He has not noticed that the ball of * blinker is not contained, but it worried for about 1 hour.
If DIY beginners also work little by little over many hours, I will still think that attachment is possible, and I think exactly that it is difficulty good to taste the attached sense of fulfillment.
Although it is in play after attachment, it is felt very refreshed and becomes smarter than imagination! The presence of an LED tail lamp is not asserted too much, either, and it is touch good.
However, since breakage of the number plate attachment was anxious by vibration, the rubber board was inserted.
Since processing was somewhat required for attachment, I was allowed to be a five stars if it is only a parenthesis, but to use evaluation of four stars.
View detail
Fits: DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1198, DUCATI 1198S, DUCATI 848, DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1198, DUCATI 1198S, DUCATI 848
The thing which fulfilled the conditions which will be said if processing of a center panel is unnecessary by the thing corresponding to a race regulation was a cowl of delight. Processing of a center panel did not have necessity and the location of t
The thing which fulfilled the conditions which will be said if processing of a center panel is unnecessary by the thing corresponding to a race regulation was a cowl of delight.
Processing of a center panel did not have necessity and the location of the bolt also had it. [ perfect ]
However, a chip being seen as a regrettable point in a corner (both sides) of a cowl and a cowl are a place called white (there is the necessity for paint application) rather than are black.
View detail