Reviews
I bought it for outside for Seat.
I bought an external Seat, but the Bracket was ported from OEM, so I bought it. It takes a little bit of force to lock the Seat, but it is acceptable. View detail
Seat Quantity:2pc. Ideal for Set holders
I bought it because I could not purchase the Bracket alone with OEM Parts.
It is helpful to change the Seat when the mood strikes.
View detail
I haven't used it yet, but it looks like it will fit TOWN perfectly.
I haven't used it yet, I'm going to write about it after I use it, but I keep getting emails asking me to write Impressions. View detail
Fits: SUZUKI GRASS TRACKER GRASS TRACKER, SUZUKI GRASS TRACKER BIGBOY GRASS TRACKER BIGBOY
It was Large sturdy even without painting.
It is a very beautiful Gel coat and I installed it as it was. It's a shame that there are 8 washers in it and I had to adjust the width of the washer between two washers in one place. Quantity of the thicker colors:I wanted to include 1pc. each. The rest looks great and I have nothing to complain about. View detail
good-looking
The OEM Chain Guard is difficult to polish, which led me to purchase this product.
Space is now available as I had hoped, making it easier for Chain to polish.
I'm also glad I bought it because the dirt was noticeable in the silver, and it looks and feels much better now.
View detail
good.
It was installed on a 15 year old w800 black edition. I am satisfied because it is light and the length is suitable as it is made of Frp material. There was no big difficulty in mounting as there was a bolt hole in the same position as the original one. However, it is brand new and has some minor scratches, so I am giving it 4 stars Equipped with a 15-year w800 black edition. Frp material is light and suitable for length. There was no big difficulty in mounting as there was a bolt hole in the same position as the genuine one. However, it is a new product, but a product with a small kiss comes and gives 4 stars. translated by google translate View detail
Large satisfied
To On road from VINTAGEOFF
It was the same as Image
It was well made and safe to use
But wouldn't it be nice to be a little less expensive? I thought
The attached mounting screw is the Material:I wish it had been Stainless Steel
Later, the OEM mounting Screw was 8mm head hexagon, but it was 10mm head I wish I had been able to match that
But I'm happy with Total ^ - ^
View detail
Fits: HONDA CROSSCUB(JA45), HONDA CROSSCUB , HONDA SuperCUB110 JA10 series, HONDA CROSSCUB110
If you like this design, you can use Recommendation
Since I don't have a favorite exhaust system, I painted OEM Heat Guard in Black I was thinking of using it, but I happened to find it in Shopping I prefer the type of sale, but I buy the current one because it's already gone The shape is the same as the OEM and the construction is solid The accuracy of the hole is also no problem, I was going to pontificate on it because of the Black Gel Coating A small paint chip in the depths of the hole that seems to have been caused by the drilling process, and a round hole that was made around the hole I had a Wound (probably made out of a hole saw), so I painted it Matte Black, and then painted it in Matte Black I did View detail
Combination Warning
I wanted to make the area around the rear amps Compact and replace it with the OEM Bracket I bought it because I thought it would be easy to do
Under normal circumstances, the effect would have been as expected, but due to the following conditions, the result was It was very difficult to install
Combination with a rear carrier
I had installed a rear carrier as a retrofit, but it is incompatible with this product When you install this product, you need to bolt three upper parts and one center, but the upper three parts are not compatible Tandem seat, Rear carrier and the material in question:Three FRP brackets need to be fastened Among them, the rear carrier needs to be mounted at a delicate angle, and if it is not, it will not be able to be fixed at all I couldn't get the Screw in the middle of the two places to fasten In addition, in my case, I have a separate ETC body on my rear carrier and the cord Please be careful if your vehicle is equipped with the Carrier It is
Combination with License PlateFrame
When you are using a License PlateFrame, the Number doesn't fit perfectly It is designed to fit the dimensions of the License Plate without a Frame If it is removed, it is early, but because I wanted to leave it daringly, I shaved the Bolt hole of Body a little I installed it by biting the Rubber on the part that floats against it
There was an unexpected Trouble, but Harness of Exclusive Design It's really just a matter of connecting them together and achieving the Compact look without being unnatural
If you understand the above, you will get the results you expect
View detail
Perfect fit for W800.
As my title describes it, I'm not sure if it's the same as the OEM one but it looks and performs exactly the same. The only thing that I have to subtract one star from my review is the lock nuts are not included, so hopefully you have ones at home or you will need to remove from the old seat, or go buy at a hardware store. I really hope they include 2 lock nuts which would cost less than a dollar since the price is not that cheap anyway, they could have included them. View detail
Tiny
I installed 250TR for Cafe racer. OEM's Tail lamp was lavish with a large bracket attached, so I replaced it for it and it made it clearer. The installation was easy with only changing the coupling. Since there is no reflector attached, I purchased a reflector separately from the Male car and installed it. View detail
The fender clears the stock Battlax tire on the new SR400 by a couple of centimeters. The width of the fender at the mounting holes is a little narrow though. But since it is fiberglass, it had enough flex/give to allow me to mount it to the forks. I'm no
The fender clears the stock Battlax tire on the new SR400 by a couple of centimeters. The width of the fender at the mounting holes is a little narrow though. But since it is fiberglass, it had enough flex/give to allow me to mount it to the forks. I'm not sure if I'm stressing the fiberglass and whether that will reduce the lifespan of the fender. I hope it doesn't crack! View detail
I like the minimalist design of this chain guard. It matches the look of their front fender. However, the position of the guard is just a little off centered. it doesn't sit directly centered over the chain, so it doesn't completely protect you or the bik
I like the minimalist design of this chain guard. It matches the look of their front fender. However, the position of the guard is just a little off centered. it doesn't sit directly centered over the chain, so it doesn't completely protect you or the bike from chain grease spray! View detail
Good product, newly well prainted was deliver with plastic and box to prevent damage during the shipping. Today just fixed onto my Tricker XG250, look great. I love my new look of my bike now. A suggestion to manufacturer, if able to make bigger screwed h
Good product, newly well prainted was deliver with plastic and box to prevent damage during the shipping. Today just fixed onto my Tricker XG250, look great. I love my new look of my bike now. A suggestion to manufacturer, if able to make bigger screwed hole on the blinker position will be even perfect, cause my bike using original blinker, and is to close to the exhaust. Overall this item look great on tricker. View detail
Good product, newly well prainted. Today just fixed onto my Tricker XG250, look great. I love my new look of my bike now. A suggestion to manufacturer, if able to make bigger screwed hole on the blinker position will be even perfect, cause my bike using o
Good product, newly well prainted. Today just fixed onto my Tricker XG250, look great. I love my new look of my bike now. A suggestion to manufacturer, if able to make bigger screwed hole on the blinker position will be even perfect, cause my bike using original blinker, and is to close to the exhaust. Overall this item look great on tricker. View detail
Compared with a NORMAL, it is a size of the increase of 20~30%. attachment is easy. The bolt nut of a sheet, a Lamp Stay, and a Tail lamp is removed, a Coupler is substituted, and the rest is as a bolt nut is attached. Although there is not a d
Compared with a NORMAL, it is a size of the increase of 20~30%.
attachment is easy.
The bolt nut of a sheet, a Lamp Stay, and a Tail lamp is removed, a Coupler is substituted, and the rest is as a bolt nut is attached.
Although there is not a
description, it is exchangeable in 10 minutes.
The atmosphere which is freely different using the Stay of the
NORMAL can be experienced.
It is although it is however worrisome that the Plating portion of a pedestal is a little wavy.....
View detail
Since the Side-cover Air cleaner was exchanged, it purchased. By the design only for vehicle type, it has attached easily.
Since the Side-cover Air cleaner was exchanged, it purchased.
By the design only for
vehicle type, it has attached easily.
View detail
![Front Fork Boots]](https://global.webike-cdn.net/photo/article/20/1340461947520L.jpg)
The Front fork dust seal of 250TR deteriorated, and since it exchanged, the Front fork boots was attached and carried out collectively. I feel that 250TR came seemingly to be a VINTAGE further after attaching a Front fork boots. Since the attachment had
The Front fork dust seal of 250TR deteriorated, and since it exchanged, the Front fork boots was attached and carried out collectively. I feel that 250TR came seemingly to be a VINTAGE further after attaching a Front fork boots. Since the attachment had to remove the Front fork from the car body, it required time very much. View detail
Since he wanted to unify the circumference of rear one of 250TR black, it purchased. Since it is short made 150 mm compared with the pure Rear fender, the circumference of rear one feels it refreshed (the photograph is also exchanging Tail lamps from an
Since he wanted to unify the circumference of rear one of 250TR black, it purchased. Since it is short made 150 mm compared with the pure Rear fender, the circumference of rear one feels it refreshed (the photograph is also exchanging Tail lamps from an authentic positive one). As planned, the circumference of rear ones could be unified black and satisfied very much. View detail
Since the pure Front Rear fender of 250TR was exchanged for the product made from OSCAR, the Tail lamp of the Manufacturer was purchased. Although there was several kinds or a Tail lamp, the basic Lucas type was chosen. Since this Tail lamp can carry ou
Since the pure Front Rear fender of 250TR was exchanged for the product made from OSCAR, the Tail lamp of the Manufacturer was purchased. Although there was several kinds or a Tail lamp, the basic Lucas type was chosen. Since this Tail lamp can carry out [ LED ]-izing as an Option, I would like to LED-ize later. Attachment of a Tail lamp is very easy at a Bolt on. View detail