Reviews
![[Avis] Neodym Drain Bolt Honda/Yamaha/Suzuki/Kawasaki Vehicle](https://img.webike-cdn.net/catalogue/images/34041/61634or61640_001_TS.jpg)
Fits: HONDA CBX250, HONDA XLR250, KAWASAKI GPZ400, KAWASAKI GPZ400, SUZUKI GSX250FX, YAMAHA TT250R Raid, HONDA NSR80, HONDA NSR50, HONDA GORILLA, HONDA VTZ250, HONDA MAGNA, HONDA JAZZ, KAWASAKI ZRX1200, HONDA VTR250, HONDA MONKEY, KAWASAKI W650, KAWASAKI ZRX1100, KAWASAKI ZZR1200, KAWASAKI ZRX400, KAWASAKI ZXR750
Recommendation Products
[How is it used?
I use it on many motorcycles to clean the engine oil. My favorite
Was the one you received as per Image?
As per Image
How was your experience with it?
If you are using just an OEM Screw, you are missing out. There is such a good product!
[Points to note]
Use the Torque wrench and don't squeeze too hard!
How did it compare to other products?
I've only used this Manufacturer, there is no hole for Wire, Small hole is Design. I don't race so it's not a problem for me, but if you have a race car, look for a different product.
Other items that would be helpful
I'm sure a lot more people would buy this product if you put a hole in it for the Wire to go through, instead of just the Design!
View detail
Fits: HONDA CBX250, HONDA GB250 CLUBMAN, HONDA VT250 SPADA, HONDA XL-DEGREE, HONDA XLR250, HONDA XR250MOTARD, HONDA DREAM50, KAWASAKI GPZ400, KAWASAKI GPZ400, KAWASAKI GPZ900R, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZXR250, KAWASAKI ZZR250, KAWASAKI ZZR1100/ZX-11, KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 750
not a match for (e.g. outclassed)
[How is it used?
2020 ZX-6R
Was the one you received as per Image?
There is no hole for Wiring.
I feel lightly cheated. If you look closely at the picture, you can see it.
View detail
Fits: HONDA CB-1, HONDA VTR250, HONDA jade, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA CB400SF, HONDA CB1300 SF, HONDA CB400SF, HONDA CB1000 SF (Big One)
I'm glad I bought it
The Blinker Bracket on my 19991 JADE broke off and blew up.
I bought it at the last minute.
The standard of the Cable is different, and it is only OuterCase that I used.
Cable and Valve both used the old one, but it didn't feel any different.
For the price, this was a super bargain for the quality.
View detail
Fits: HONDA VTX1800, HONDA SHADOW400, HONDA Shadow classical400, HONDA MAGNA(V-TWIN MAGNA), SUZUKI INTRUDER400, SUZUKI Intruder Classic400, SUZUKI BOULEVARD400, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA RS100 STD/SP, SUZUKI BOULEVARDS50(INTRUDER800,VS800GL), KAWASAKI VULCAN800, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN800, KAWASAKI VULCAN400, KAWASAKI VULCAN400, KAWASAKI VULCAN400, HONDA STEED400
High quality material, can fit on my bike the NC750X without a problem, can take all shapes to fit with my saddle bags. View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Cheap but good build quality
My brother and I have a KATANA Screen that has deteriorated badly over the years, so I'm looking for an original OEM Screen that's in good condition, but it's hard to find. [Color] I bought and use Smoke and Clear. My brother... [Color] We like the Smoke and we like the Clear, so we'll stick with this until we find an OEMscreen. View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
[Color] Smoke is too thick.
I use it for KATANA which I co-purchased with my brother. I bought this product as a trial rather than looking for an expensive OEM product. [Color] I just don't like the Smoke and the Fitting is good and more solid than I expected. However, I would still like to have an OEMscreen in good condition, so if you just want to bridge the gap until then... [Color] I will put up with Smoke being thick. View detail
Fits: HONDA CB750, HONDA CBX250, HONDA NS250, HONDA NS400, HONDA VF400, HONDA Forza(MF10), HONDA fusion, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, SUZUKI DF200, SUZUKI GSX400, SUZUKI RF400, SUZUKI RG400, YAMAHA XZ400, YAMAHA vino, SUZUKI SV1000S, SUZUKI SV1000, KAWASAKI ZZR1200, KAWASAKI ZX-12R, KAWASAKI 1400GTR
CB125T JC06
I bought it for the spare of CB125T JC06. It was darker than NORMAL and the optical axis was not clear. Well, it is the feeling that it cannot be helped for the price. When I tried to install it again, the high beam did not light up. Unfortunately, I discarded it. I think it is good to have it for spare because the price is cheap. View detail
Fits: HONDA DIO DIO AF35, HONDA DIO DIO AF34
For Refresh
I bought it for the LIVE DIOZx Refresh.
The packaging is simple, with only a protective film on the stainless steel part.
There is no Instruction Manual either, but there was no problem because I only had to replace the one that was attached.
The OEM Product was quite deteriorated and the exhaust pipe was rusty and ragged.
When you install this product and engage the engine, the sound is not heard in the state of Idling.
It was a small piece of work.
The acceleration was sluggish and it felt like it was worse than the OEM product.
The highest speed also seems to have dropped some.
It is the performance of the price, but there seems to be no problem for city riding.
Gasket is not included and is required separately.
View detail
For re-covering fabric.
It's not an easy cover, you have to use a Tucker to reupholster it. I couldn't do it. View detail
![Fender Eliminator Kit [with Plating Grab Bar]](https://global.webike-cdn.net/photo/impression/73/7323d104e75e22c3e92113e7c6902f44L.jpg)
Fits: HONDA MONKEY, HONDA GORILLA
Beware of 3PCoupler's Wiring
The Screw Pitch that I was worried about was not out of alignment and the work was done in no time.
I also like the fact that it has three Screw holes and can be adjusted back and forth.
However, out of the 3 PConnector of the included tail lamp, Green and Brown are upside down.
The Plus and Minus of the Position sphere have been swapped out.
If you connect it as it is, the headlight and the tail lamp will not work because the AC current for the electric equipment is grounded as it is.
It takes less than a minute to replace the pin with the pointy, thin Tweezers, which can be easily removed by pushing down on the return of the pin.
I think you should put it on the product description.
View detail
Seat Cover for Honda Dio AF56-57
The shape is completely identical to the original factory. An excellent replacement for the original seat upholstery. The seat was overtightened for the first time and no problems arose. The material is strong and resilient. The form is completely identical to the factory original. Excellent replacement of the original seat upholstery. The seat was tightened for the first time and there were no problems. The material is strong and resilient. translated by Google Translator View detail
Fits: HONDA CBX250, HONDA XLR250, KAWASAKI GPZ400, KAWASAKI GPZ400, SUZUKI GSX250FX, YAMAHA TT250R Raid, HONDA NSR80, HONDA NSR50, HONDA GORILLA, HONDA VTZ250, HONDA MAGNA, HONDA JAZZ, KAWASAKI ZRX1200, HONDA VTR250, HONDA MONKEY, KAWASAKI W650, KAWASAKI ZRX1100, KAWASAKI ZZR1200, KAWASAKI ZRX400, KAWASAKI ZXR750
For removing iron dust from oil
I haven't installed it because I haven't done the oil replacement yet, but it is recommended for removing iron dust from oil.
It is easy to install as it only needs to be replaced with the Drain bolt.
View detail
![[AVICE] Three-Sided Chain Brush & Replacement Brush Set](https://img.webike-cdn.net/catalogue/images/22527/06241403_51c7d31f0ce1a_TS.jpg)
Chain cleaning essentials.
Nylon brushes can be used to clean the seal chain without damaging it. It is very efficient as it can clean the front, back and top surfaces at the same time. Extra brushes are available in Quantity:It's a set so it seems to be useless. View detail
Fits: HONDA DIO DIO AF35, HONDA DIO DIO AF34
OEM Equivalent Product is not a lie
You can run quietly with the same volume as OEM Exhaust System.
Thank you for this price.
It is recommended when you feel the problem with OEM Exhaust System.
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR250R (MC17/19), HONDA CBR1000RR, HONDA CBR250RR (MC22), HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA NC750S, HONDA CB400SUPER BOLDOR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1000F
Much cheaper than OEM
I had to replace the OEM footpeg because it broke off at the base due to a standing error in XELVIS.
Aluminum casting parts are not very tenacious, so when they break, they break easily.
This one from aiNet is a bit smaller than the OEM, about 3cm wide. It looks unreliable, but it is practical enough and not so different from the OEM.
However, when there is vertical movement of the ankle, such as during Shift change, the thinness of the width is exquisite and allows for smooth movement.
The price is cheap, and it is the part to buy.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
There may be a repeat.
I found this product when I was looking for a replacement because the screen in use had a vertical crack in it.
The price is reasonable, so I ordered it with the understanding that the holes on the Bolt were not aligned at the time of installation and it would require some modification.
When I installed it, there was no need for any modification at all, just tighten the bolts to finish the replacement of the screen.
(There may be some modification at the time of installation depending on the individual differences between vehicles.
Also, the Windscreen Mole that came with the OEM was just fit and could be used as is.
As for the color, I'm personally darker. [Color] I'm not a big fan of Smoke, but this product was Limit acceptable.
It can't be helped that the Screen has a fine Wound on it, but while the pricey Screen has its appeal, I also think that this product, which can be replaced frequently without worrying about the Gold amount, is also attractive.
View detail
Fits: HONDA CBX250, HONDA XLR250, KAWASAKI GPZ400, KAWASAKI GPZ400, SUZUKI GSX250FX, YAMAHA TT250R Raid, HONDA NSR80, HONDA NSR50, HONDA GORILLA, HONDA VTZ250, HONDA MAGNA, HONDA JAZZ, KAWASAKI ZRX1200, HONDA VTR250, HONDA MONKEY, KAWASAKI W650, KAWASAKI ZRX1100, KAWASAKI ZZR1200, KAWASAKI ZRX400, KAWASAKI ZXR750
I am satisfied
The Bolt I'm using now is made of lightweight aluminum.
I'm planning to change to this one as the corners are slowly licking.
We don't usually see this place.
It's fun to have a choice of colors and an inorganic Graphic.
View detail
Satisfied with Accuracy Large
One year of use and no problems at all, and the NORMAL edge rubber will stay on. [Color] Smoke degree is also cool. I have no complaints. Ana position is also just fit! View detail
Fits: HONDA CBR250R (MC17/19), HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X, HONDA fusion, HONDA fusion, YAMAHA Cygnus X, YAMAHA Cygnus X SR, YAMAHA SMAX, YAMAHA MAJESTYS, YAMAHA MAJESTY125, YAMAHA MAJESTY125, SUZUKI GSX400, SUZUKI RF400, SUZUKI GSX400, HONDA VALKYRIE, HONDA VALKYRIE, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA)
In use, but …
Recently, it started to squeak and squeal. When disassembled and cleaned, and applied Grease, it was cured, but the motorcycle shop said that Pad seems to be bad. I think that those who are considering should also consider such Risk because of the price. View detail
Nice product
Perfect price, perfect fitment. Fast international shipment, worth the shipping price. Tinted and clear visors are both cool. View detail