Reviews
Fits: Others for 12V * Attached bracket can be removed for use
It is an ordinary Horn.
Temporary regal need to purchase.
Large and heavy, but it's cheap so it can't be helped.
It does not fit in the light cowl and I am considering where to install it.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Quality is more than the price.
It's much cheaper than other companies' products, but as other reviewers have said, I was able to install it without any problems, and it was surprisingly beautiful.
I've worn Titaniumium coat screens from two different companies, but after many twists and turns, I ended up going back to Black. I would appreciate a lower price to change my mind.
View detail
Fits: HONDA STEED VLX, HONDA MAGNA(V-TWIN MAGNA), HONDA Shadow classical400, HONDA SHADOW400, KAWASAKI VULCAN400, KAWASAKI VULCAN400, KAWASAKI VULCAN400, KAWASAKI VULCAN800, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN800, SUZUKI Intruder Classic400, SUZUKI INTRUDER400, SUZUKI BOULEVARD400, SUZUKI BOULEVARDM50(INTRUDERM800/VZ800), YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
Cospa best
I bought this product to fix my motorcycle after purchasing a Side Back. The deciding factor for my purchase was the price. It was cheaper than the price of a real one. It is easy to install and is a great product. View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR
Low price anyway
I used it for my '08 SE44JFrontDeskBrake.
In layman's terms, I think it's okay in terms of Material, and I don't drive on the highway. (Mopeds are impossible). I don't drive downhill on mountain passes, so I think the Pad is sufficient.
Since the initial braking distance of the new pad was not good, I had to cut out the pad face and corners first. I also replaced the brake fluid, applied a thin layer of brake grease, checked the torque on the bolt, and finished the installation.
I'd like to see how long the pad will last and how much of the pad will be shaved off.
View detail
ได้รับของแล้ว สินค้าโอเค View detail
Used in Seat reupholstering.
I used this product to reupholster the Seat on my BirdCity125.
It is Repeat because I had bought it before with the Seat reupholstering of 400 Naked motorcycle.
Unlike Vinyl, which is thin like a garbage bag or packaging that comes out when you peel off the OEMSeat, this one feels thicker and firmer.
I used a Garbage bag to replace the seat because I didn't have a suitable Vinyl, but I can expect more durability than that.
In the past, I was able to fit the front and back of Vinyl to the short side of the rectangle on Naked motorcycle, but on BirdCity, I put Vinyl diagonally because Seat is larger than Naked motorcycle.
Vinyl is sent in a folded state, but the crease does not affect the Seat surface even if it is used at an angle or stretched a little by pulling in the reupholstering process.
It is not that I reupholster Seat so often, but I want Webike to keep it in stock because it seems to take a few days to order it.
View detail
![[TEOGONIA] Fireplace Tong](https://img.webike-cdn.net/catalogue/images/89588/09240306_5d89881c5f883_TS.jpg)
Texture is good. No distortion
After a certain celebrity used it, the number of users increased.
I had been using something else, but I kind of bought it.
The texture is certainly good and the sense of ownership is exciting.
But the movement was reluctant, so I inserted Oil.
The charcoal is easy to grab because of the matching dust on the tip.
There is a person who arranges the wood of Grip, but I want to use it as it is for a while and make it tasteful.
Honestly, it's good for Camping in the car, but I think the lighter Tongs will suffice on the Motorcycle because of the weight.
View detail
Fits: HONDA CB750, HONDA CBX250, HONDA NS250, HONDA NS400, HONDA VF400, HONDA Forza(MF10), HONDA fusion, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, SUZUKI DF200, SUZUKI GSX400, SUZUKI RF400, SUZUKI RG400, YAMAHA XZ400, YAMAHA vino, SUZUKI SV1000S, SUZUKI SV1000, KAWASAKI ZZR1200, KAWASAKI ZX-12R, KAWASAKI 1400GTR
When the weather is nice, I can see it well.
When the weather is nice, I can see it well. It's hard to see when it rains or the weather is bad. I'm using all weather gold now. View detail
Not particularly inferior to OEM
The shape of the bolt is different from the OEM, but you can't tell because it is hidden by the rubber. The price is 7,500yen for OEM, so it is very reasonable. I installed it and ran at high speed, but the sagging was the same as OEM, and I compared the plating part with OEM, but I couldn't find the difference. View detail
![[Avis] Neodym Drain Bolt Honda/Yamaha/Suzuki/Kawasaki Vehicle](https://global.webike-cdn.net/uiu/impression/202111/13_1019294_6190031063267.jpg)
Fits: HONDA CBX250, HONDA XLR250, KAWASAKI GPZ400, KAWASAKI GPZ400, SUZUKI GSX250FX, YAMAHA TT250R Raid, HONDA NSR80, HONDA NSR50, HONDA GORILLA, HONDA VTZ250, HONDA MAGNA, HONDA JAZZ, KAWASAKI ZRX1200, HONDA VTR250, HONDA MONKEY, KAWASAKI W650, KAWASAKI ZRX1100, KAWASAKI ZZR1200, KAWASAKI ZRX400, KAWASAKI ZXR750
Drain bolt.
Acquired for Honda Monkey. In terms of material and quality of processing, everything is excellent, a very useful function of a magnet. It's worth taking. Acquired for Honda Monkey. In terms of material and quality of processing, everything is excellent, a very useful function of a magnet. It's worth taking. View detail
Ai-Net Euro front blinker & rear tail unit
Thank you Ai-Net for your euro blinker & rear tail unit. Very nice quality. Clear lens and lights. Matches the mica candy apple red color of my Fusion CN250. Transaction was very good also as with the packaging. Arrived here in the Philippines at expected time. View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Very cheap, but satisfactory product.
The packaging of the product is quite solid, and the contents of the warranty are not certain, but to my surprise, even the warranty card was enclosed.
The Screen itself is not too dark. [Color] I'm happy with Smoke, it's close to the shade I was looking for.
As for the installation, there was a little gap of the hole, but I was able to install it without processing.
Because KATANA's Screen is easy to be cracked in the installation part, I applied Screw lock and fixed Torque to be weak.
Now, I would like to see how durable it is in the future.
It's very cheap but I'm satisfied with the quality of the product, so I can recommend this product to other KATANA riders.
View detail
![[AEBS] LED Blinker Lamp Set](https://img.webike-cdn.net/catalogue/images/29483/61028_01_TS.jpg)
A◯TIVELicense Plate Holder with LED Blinker like this
Installed on a GSX-R1000R 2019
Title
I found it on Amaz◯n, but I didn't expect webike to carry it too.
Unlike the expensive original, it can be made to look similar at a relatively low cost.
Also, if the original Blinker is broken, this may be a good replacement.
(I didn't compare them, so I'm not sure if the Wiring removal and mounting screw positions match.)
The light intensity is sufficient and is visible in daylight.
However, is the directionality strong? If you install the Number in a way that makes it hard to see from the following car.
Wiring is the same as general LED Blinker.
The line is very thin, so you need to be careful not to cut it.
R1000 below (L9) For installation on the
The R1000R is originally an LED Blinker, but if you pimp it, it may become a High flasher.
In fact, when I popped it on, there was no problem while the engine was stopped, but after the engine started, it became a high flasher when the voltage exceeded 14V.
For this reason, it is necessary to put a resistor in the power consumption adjustment.
By the way, my vehicle worked fine if I connected a 30 Ohm resistor.
(Also, the original seems to be a high flasher as well, but the resistor to add is different.)
For your information.
View detail
![[A-Screw] Neodym(Neodymium) Drain bolt Honda/Yamaha/SEA BASS/Kawasaki](https://img.webike-cdn.net/catalogue/images/34041/61634or61640_001_TS.jpg)
Fits: HONDA CBX250, HONDA GB250 CLUBMAN, HONDA VT250 SPADA, HONDA XL-DEGREE, HONDA XLR250, HONDA XR250MOTARD, HONDA DREAM50, KAWASAKI GPZ400, KAWASAKI GPZ400, KAWASAKI GPZ900R, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZXR250, KAWASAKI ZZR250, KAWASAKI ZZR1100/ZX-11, KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 750
I used it on my JF31 Dio110.
Screw groove is a little longer than other companies.
Also, it seems that the screw groove is cut longer on the engine side.
I feel like I can use the Screw groove all the way to the back.
This should keep you from over-tightening by a small amount.
It has Magnet on the tip and is Recommendation.
As for the one I bought, it came with a SeaRingCopper Washer.
View detail
![[AEBS] Bleed Rubber Cap](https://img.webike-cdn.net/catalogue/images/37498/63365_1_TS.jpg)
What?
The product itself is just an ordinary Rubber cap
However, after installing it on the vehicle, it faded in about a week, even though I covered the motorcycle with a shade cover to prevent light from hitting it. It was like a light vermilion color. It faded too fast. And it cracked in about a month.
View detail
Fits: SUZUKI Address V100, SUZUKI ADDRESSV125, SUZUKI LETS(4Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESSV125
Anyway, I chose it for its cosmetic value.
I chose this product because it was very cheap, and I don't feel any problem in using it. View detail
Wiring at both ends is thick
[How is it used?
It is used as a safety protection for the 12V Wiring handling from Battery.
How was your experience with it?
The cable of both ends of the holder is thicker because the Fuse of up to 30A can be attached to this product. I think that there is no problem if it is a place where it is not seen though the feeling of discomfort comes out when I do Holder attachment etc. with a thin sq wire.
[Points to note]
Fuse is not included and you will need to purchase your own MINI flat type.
For use outside the car, we use the Wiring Cover together to increase the waterproof property.
View detail
![A-Screw] LED Blinker Tail Lamp Set](https://global.webike-cdn.net/photo/impression/68/68cec7752c89409c7d5021afb823ed20L.jpg)
Along with the rear fender-less
There is also a smaller LED Blinker, but I thought about the appeal to the following vehicle, and I installed this one which can be refreshed next to the License Plate at a lower price than ACTIVE products while gaining the area of the light emitting part, with the Bracket of Home center (Reflector I installed it with Bracket (Reflector is ACTIVE TYPE 3) and Screws.
Blinker relay is replaced to convert to LED, License Plate Light is still OEM.
View detail
It is easy to use
It's waterproof, so you can use it on rainy days.
Visibility, if it's too sunny it can be hard to see, but if you adjust the angle it's Large sturdy.
It is possible to use it either vertically or horizontally in either direction, and I think that there is no loss to have it because I will often use a smartphone instead of Navigation.
View detail
Fits: SUZUKI LETS1-4, Others , SUZUKI SEPIA ZZ, SUZUKI SEPIA, SUZUKI STREET MAGIC 50, SUZUKI ADDRESSV125, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, HONDA LEAD, HONDA LIVE DIO, HONDA dunk, HONDA TACT, HONDA SMARTDio ZX, HONDA SMARTDio Z4, HONDA SMART DIO, HONDA SUPERDio ZX, HONDA SUPERDio Z4, HONDA SUPER DIO, HONDA GYROX, HONDA GYROUP
Unchanging quality
The price is cheaper than OEM and the size and shape are the same, so it is easy to install. It's a good deal if you want to replace it in your compatible car. View detail