Reviews
Comfortable Touring!
[How is it used? Mounted on Off car
Was the one you received as per Image? As you can see in the image
Was the installation difficult? Easy, though. Alignment takes time.
How was your experience with it?
Advantage:The windshield effect can be felt from about 60 km/h. Without the screen, the driver becomes tired easily after 80 km/h, but with this product, the physical strength decline can be sufficiently reduced. It is even more effective when the temperature is low.
Disadvantages
In foggy or rainy weather, the Screen will fog up or water droplets will form on it, obstructing visibility.
The screws that connect/secure the Windshield to the Bracket have flat tips, so they get crushed when they are put on and off repeatedly, and as a result, the screws on the Female side cannot be secured. As a result, the screws on the female side were crushed and could no longer be secured.
[Included Parts:were they on? Aligned, but Bolt tip is flat, so replaced with a commercially available chamfered one.
[Was there anything that disappointed you? Because it is heavy, it shakes to a certain degree.
View detail
Fits: KAWASAKI GPX250/R/R2, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI EX-4, KAWASAKI GPX750R, KAWASAKI GPX750R, KAWASAKI GPZ400R, KAWASAKI GPZ400S, KAWASAKI KLE400, KAWASAKI KLE250 ANHELO, KAWASAKI ZRX400, KAWASAKI ZX-10, KAWASAKI ZZR250, KAWASAKI ZX-10, KAWASAKI ZZR400, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR400
gpz900rRear Brake Pads
It is good enough for a rear brake, and not too effective when applying a load during corner rings.
Durability is still unknown, so I'll give it 3 stars for now.
View detail
Fits: HONDA CBX250, HONDA XLR250, KAWASAKI GPZ400, KAWASAKI GPZ400, SUZUKI GSX250FX, YAMAHA TT250R Raid, HONDA NSR80, HONDA NSR50, HONDA GORILLA, HONDA VTZ250, HONDA MAGNA, HONDA JAZZ, KAWASAKI ZRX1200, HONDA VTR250, HONDA MONKEY, KAWASAKI W650, KAWASAKI ZRX1100, KAWASAKI ZZR1200, KAWASAKI ZRX400, KAWASAKI ZXR750
Neodymium drain bolt.
Neodymium drain bolt for Honda. Purchased for Honda Little Cub. In terms of material and processing quality, everything is fine, a very useful feature. Great for picking up metal shavings. I recommend! View detail
Fits: HONDA fusion, HONDA fusion, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA FUSION
Really Impress !
Really impress with the quality of the product ! it is not like the original but is very good ! Only thing, I'm from Canada and we have one more button to change from metric to imperial (mph - km/h)! who is not there ! View detail
[AEBS] Dress Up Socket Bolt Cap
It fits well and it's good Please sell a lot I think I can use the leftover later The delivery arrived on time The packaging is strong View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
It's not bad, but not bad for the price.
It is cheap, so it is easy to crack if you close it a little too tight, but the price is Reasonable, so I am satisfied with it. View detail
Fits: Others Compatible with Hose inner diameter 6mm.
unspeakable quality
Gasoline leaks from the joints and is completely unusable. We wanted to return or exchange it, but we couldn't get anywhere with EyeNet. As a result, UeBig was kind enough to return it to us for a refund. Webig is wonderful. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZXR400R, KAWASAKI ZXR400R, SUZUKI GSX-R250/R, SUZUKI GSX-R250/R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI RG400, SUZUKI RG500γ (Gamma), SUZUKI RF400, SUZUKI RF900, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI GSX400, SUZUKI GSX400S KATANA, SUZUKI GSX750F, SUZUKI GSX750 KATANA
Cheap and necessary
Assuming it is to be used for the rear brake. Necessary and sufficient." It is
I have used it for several units in the past.
Since I drive 10,000 to 20,000 km per year in town and use the rear brake almost exclusively on public roads, the inexpensive pad is a great help.
The Control nature is Outstanding?" I'm not so sure about that, but I'm not complaining because I don't think I can operate so severely with my feet to begin with.
I don't think it is a durable one.
When I used to use it for Gymkhana on my CB400SF, it was gone after about 400 km, but this is a special case.
I think it was about 5,000 km for public road use.
The short one, I guess.
Still, it is by far the cheapest, so it is a good cosmetic solution.
If there is a car model that fits, I would choose this one.
View detail
Fits: Others
Gasoline leak!
Gasoline leaked when installed and Gasoline flowed.
Quantity:2pc. No both Set.
I bought four of them.
Gasoline confirmed that it stops when removed.
To put it bluntly, it doesn't work.
oRing seems to be small.
I called Manufacturer and no one answered.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
You can drive comfortably.
The original Screen was replaced because the original Screen had fogged up and Cracks were coming in at the mounting point.
The front of the straddle was Refreshing and felt good.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
NORMAL style Exhaust System
Give up playing Normal muffler
Changed to NORMAL style Exhaust System
Installation went without a hitch and took less than 30 minutes!
I appreciated that there was no difference between NORMAL and LARGE in both volume and sound quality!
View detail
Unavailable. I think I'll throw it away.
I bought it, and when I tried to install it, I couldn't connect the Case to the Clamp. It is not fixed. I can't use it. Should I glue it or tape it? Even if I do that, I have to open the Fastener every time I take out my phone and put it in. It's a hassle. It was a product worth the price.
I will never purchase from this Manufacturer again.
View detail
Fits: HONDA jade, HONDA VTR250, HONDA CB-1, HONDA CB400SF, HONDA CB400SF, HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA HORNET600, HONDA HORNET900, HONDA HORNET250
Requires modification for installation
There is no waterproofPacking between Lens and Body.
Bulb Socket is not well fixed and is playing rattling around inside.
Some car models require modification to the base of the Blinker mounting area.
I did not install it because I was not sure about its durability.
View detail
Fits: HONDA CB-1, HONDA VTR250, HONDA jade, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA CB400SF, HONDA CB1300 SF, HONDA CB400SF, HONDA CB1000 SF (Big One)
Modifications are assumed to be Large.
The first Valve that comes with it is a 5W Wedge bulb even though it is a Blinker.
To replace it with a 21W Single Bulb, a Large modification of the Socket section is required.
There is no WaterproofPacking between Body and Lens.
In the end, it was not installed.
View detail
It is a very large size.
It seems to be quite sturdy and may require a bit of force and hang to install, but it provides a sense of security.
As the name of the product suggests, it is designed to be quite large, and may be a little too large when attached to a small VTR. (It depends on the intended use and the size of the box.)
If too large a box is used, the front/rear balance may not be good with the weight of the VTR, but this is a matter for the user.
I think the product itself is a good one with excellent cost performance.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
The packaging was very good, but ...
The packaging was careful and secure. but some rust was visible. A little bit.
So I applied a little rust remover and it worked fine.
It needed a little work, but performance and other things don't seem to be a problem.
We feel this is a good product for those who are particular about Normal look.
View detail
Clutch for Honda CN250
The clutch looked well made and after installing it in the scooter, it turned out that it had a lot of runout, which caused the whole engine to vibrate during operation. In the end, I had to fit the old clutch. View detail
It takes patience.
After about 2 laps, there will be a little gap between the rim and the tire, so you can insert the tire lever and pry it out. View detail
The best
Bought at a good price. Will inform you around. We will repurchase if necessary. Thanks for the good stuff as always. everyone a safe rideWishing!! View detail
Fast! Cheap! Not clever!
It looks NORMAL! The sound is quite loud (I wish it was quieter …), but it's more Torque-like than NORMAL!
The end pipe is too welded and rounded. I'm thinking of adding some pipes …
At first, I used File to make the surface, just like making a ring. LOL!
Isn't the middle Bracket supposed to be installed? I'm looking in the direction of the day after tomorrow, so I'll ignore it….
The bolt for the Protector was floating, so I removed the Protector and found that the bolt holes for the Protector were facing the wrong way, so I couldn't put the Protector back together. I was thinking of using this Heat Guard for the OEM Exhaust System, but the dimensions are not the same, so it will not fit.
If you can stand the look OR can manage it, it is quiet and fast.
View detail