Reviews
Mounting with Fender Eliminator Kit
LED Lamp on the Fender Eliminator Kit was very poor so I purchased this additionally.
There is no hard work because the installation is only co-tightening with the License Plate and processing of the LEAD line.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Monster 1200, DUCATI Monster 821
I hope the Size is a little larger.
Since it is absolutely outdoor work, it stretched when there was no wind that rained, but after all pride also entered.
It is good because it is not translated at Level which I do not know if I do not see it well.
I thought it would be nice if there was a bit more to Small because it was nearly 2 mm overall.
After all I pasted it about 10 times but it did not get dirty.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Monster 1200, DUCATI Monster 821
It seems to be repasted OK
There are also comments like a one-shot opponent when looking at impressions made by other companies, which makes it easy to redecorate
I made this item here.
It seems that the shape is made smaller than the Meter surface by one size.
When pasting, I think that it is good to paste 1 mm inner side from the outer circumference of Meter.
The product is the same as the Protm Film of the smartphone and it has a moderate thickness and it is easy to pull in the air that entered.
Motorcycle with with Screen may be difficult to position and paste.
I stretched it 3 times thanks to Handlebar and Screen.
I was worried that it would not break even once it sticks, but it fits neatly.
Liquid crystal does not change in viewability.
I thought it was not a hurt place so much as a smartphone, but somehow in the end.
View detail
Large Ideal for those who do not want to change Position!
Since I attached OEM's quick shifter, Rear Sets of Other Company Product is not applicable. Initially Moto Crazy's footpeg (Making quite elaborate) It was also replaced with, I used this Adapter.
Position has a high degree of freedom and usability is good as long as it does not break the goodness of OEM setting. Balance will be broken if you do not know too much Large.
View detail
Fits: DUCATI MH900e Evoluzione, DUCATI MONSTER S2R, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale
it's the best
I am using Ducati SBK 848 EVO
Because OEM footpeg is slippery, it is this footpeg that I exchanged first
It is exquisite, not to be too close to striking and getting caught when putting down his feet at stop
I thought that it is essential for Motorcycle control of power performance like SUPER SPORTS 750
It is the impression that this footpeg and Stomp Grip make it hard to be swayed by the acceleration force of Motorcycle
Currently, we add Attachment and use it with 15 mm position upwards
The accuracy and texture of the products themselves are also high, and the system is easy to change the position, and we are satisfied with Large change
View detail
I'm satisfied with Refreshing Design.
Because it is a type without angle adjustment, it will be a finish that is very refreshing.
However, I feel that the angle of Plate does not match a little with the body of Sharp Design of Seat Cowl, but there are restrictions and restrictions.
Installation is not so difficult, but I had to cut off the car Both SidesLicense Plate Light's Wiring and I hesitated a bit about cutting the new car Wierding just delivered.
The product is solid and made with a thick Plate so it will not stick around while traveling and I am very satisfied as a result.
And, most of all, the packing condition was very good, I was surprised to see that beautifully about the Corrugated cardboard of the outer box was closely tightly closed as it was contained in each bag one by one.
Just looking at the outer box made me like this Manufacturer.
View detail
The location of License Plate Light is ...
Mounting on 16 year model S1000RR.
Installation requires OEM Rubber Push relocation or disconnection of License Plate Light Wiring → Installation, so if you are not familiar with it, you'd better ask Shop to ask.
Styling after installation becomes Race ish atmosphere and it is very good.
Unlike Aluminum, because it is Stainless Steel, there is no need to worry about breakage due to Gold genus fatigue due to vibration, and it is also easy for self-propelled faction to remove Blinker and Number by Circuit travel etc.
The drawback is the increase in weight due to Stainless Steel and the position of the product's License Plate Light.
Because the weight increase of Fender itself is not the weight under Spring, I think that it is necessary for the general public to care.
The problem is License Plate Light attached to the product, this is the current law (Number violation obligation) There is a high possibility of conflict with.
Because the attachment position is close to Number, & Number angle is oblique so the place name Number gets hard to see a little.
This is because there is a possibility that the place name Number may not be completely seen from a car with a high car height, and it is considerable GrayZone against violation of display obligation that crackdown became severe recently.
As Material is Stainless Steel, I think that if you make a little processing and make it a little easier to see, there is almost no problem.
(Although it is a digression, I did not dislike the form of OEMFender, but I fixed it back because the problem of contact with Blinker occurred in & Pannier case installation)
However, since it is a well thought out product as a whole, Recommendation can be done.
View detail
You can refresh it.
I have been using it since just after delivery. I was concerned about fixing the bent crooked bent earlier by a car inspection, so I decided to exchange it. Material : Stainless Steel is strong, Design also complains. View detail
LED power supply compatible with AC power supply License Plate Lamp
Purchased to install License Plate Light on KDX 200SR.
Following the adjustment of the angle angle and the installation of the Reflector, it is now possible to run completely with confidence.
【What made you decide the purchase?】
As we increased Headatt's Watt count, we decided to make LED light with low power consumption.
Normal LED light can not be used with KDX of AC power supply, but it is thought that it can be diverted if this product for AC power supply GROM can also be diverted.
【How was it actually used?】
Thickness was thin, and it was installed on the back of Tail cowl.
Installation is strong Magic tape + Tie Wrap Fixing glued with cemedine.
In the vicinity of Idling there is insufficient power generation amount to illuminate the whole number, but when I confirmed by having a friend run behind, I can see the number sufficiently with white light during driving.
【Was it difficult to install? (Hard parts case)】
Because it is a product for GROM, Wiring was short and could not be attached to KDX as it was.
For that reason Wiring was extended processing.
Other than that it was installed without problems.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Adhesive Tape is attached to the product, but it alone is uneasy with Off car with many vibrations.
Therefore, peel off adhesive, attach strong Magic tape to License Plate Light and car body with Cemedine and adhere it, and fixed it with Tie Wrap.
It runs over 1000 km including off-road, but it does not fall at all.
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is better to reduce the power consumption.
【Have you compared items?】
None, I can not find any other LED corresponding to the AC License Plate Lamp.
[Others]
For now and so on etc. Although there is not, but this product diverts the commodity for GROM to the last, I think that complaints can not be said even if it breaks suddenly.
Anyway, it is now possible to run completely with peace of mind by attaching this product following adjustment of Number angle, Reflector, from the state of almost Number only state.
View detail
Fits: DUCATI 1199Panigale, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI PANIGALE V2
1299 is also OK.
I attached 1299 MODEL without problem.
There is no cheap appearance and also high class is reasonable
Considering Cost performance is satisfying Large!
View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER ICON
It is better if you have an explanation of details.
Please see the Catalog after the installation of the essential. It is refreshing and it feels nice.. The photo shows the photo after removing the existing License Plate Base. Currently we procure Black Bolt and close the hole.
Hexagon Bolt is heavily used for Ducati, and if you do not use good tools you will lick Bolt. Actually, when I was removing License Plate Light, I used Hexagonal Wrench on hand but I licked fine. After that, I investigated variously with Net and bought a tool of GERMANY called Wera and worked again, but it is highly recommended to use it very much. Bolt licked somehow. In work, diversion of License Plate Light takes a lot of time. In conclusion, it is best to disconnect the code near the License Plate Light and reconnect the code later. By the way, installation of Fender Eliminator Kit is easy.
View detail
Recommended for those who do DIY!
Since I do not want to use Gold as Fender Eliminator, I bought a kit with only Lamp and Bracket.
By bracketing with Bracket Number, Lamp comes just right.
The shape of Lamp is also Small until now so simple, so I think that there is no discomfort in any Motorcycle.
It is easy to connect with NORMAL's License Plate Light.
View detail
Fender Eliminator Kit is fine and healthy.
I have been using it for 4 and a half since I installed it on DUCATI 1198SP.
At the time this was
I used it with LED Blinker with ACTIVE's License plate,
I like the Rear around quite clearly.
After extending from Seat Cowl to Silencer under Arm
License plate will be attached.
Because Arm is thin, Blinker's Coupler - I had a hard time to pay Wiring classes in Arm. (image)
In addition, it is easy to have LongNeck's hexagon Bit when installing.
(I think that Size was 5 mm or 6 mm, but since I installed it was quite a while ago - - -. )
Matte Black color Material is sturdy Material : Stainless Steel is.
The thickness is also 2. There is also 5 mm, even with the vibration of Big twin for many years there is no Trouble.
Design is unquestionable.
Also, if you want to lower the angle (Or if you want to raise) Because it is Stainless Steel
Even if you bend Bracket to a certain extent with power it will stick.
Reflector diverts OEM.
The price is also (Compared with other companies) Reasonable, real performance is also complaint without Recommendation.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
This is required
I changed to MULTISTRADA 1200. In accordance with transfer, we purchased various information on Net, but this is the best thing that cheaper and the effect was visible.
As I refer to other people's impressions, the gold amount was cheap so I tried installing it at the time of car delivery, but there is no sense of security at presence or absence. When getting off Motorcycle, I think that it is mostly better to get off Side Stand, but MULTISTRADA does not know where Side Stand can not see from the top in a sitting state (I think that you will understand if you get used to it).
I barely saw in this state that I was able to withdraw Side Stand by somehow only with this installed product.
From the perspective of Design importance, I think this product is a pros and cons, but from the standpoint of standstill prevention, I think this product is essential.
Regarding price, other parts are expensive so it may have been A little paralyzed, but I think that it is a price.
View detail
It is unexpectedly hard and thick
I am putting a Motorcycle in a bicycle parking lot on the Concrete floor. Side Stand scratches on the floor and purchased to prepare the underlay before complaints came out.
It is not that I do not like it, but for comparative study, even if we search similar items with Net, it did not quite hit and it was only this. It is a clearance product.
I thought that it was a soft material like just a round Felt, but the back side is a Plastic board of slickle, the surface is textured plywood, there is the smallest limit decoration as well, I think that it is not ashamed also at the bicycle parking lot.
I think that it will disappear if you leave it in the outside bicycle parking lot. I think that it is an indoor limited item.
Size is about 20 cm in diameter.
The price is a bit high, is not it?.
View detail
Making and Style are the best
It is a product I bought before delivery.
I also looked at other companies' Fender Eliminator, but the product that appeared at the ideal position was Moto Crazy.
Items satisfying price (^^) v
I had trouble installing the Reflector - - -
View detail
Fits: DUCATI 1098, DUCATI 1198, DUCATI 848, DUCATI 1098, DUCATI 1198, DUCATI 848
Excellent
In the case of NORMAL, behind footpeg, a little bit of protuberance will hook the heel.
I got used to it now but I can not deny the feeling of uneasiness unless I look at it all the time - - -
I placed it between the Clutch pedal and the footpeg, made a sure "hit" position, and raised the usability.
If you have a habit of putting your toes under Clutch pedal, there is another danger if you do not care about riding.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
It is inconspicuous in a good meaning
Side Stand became a deep position and it was hard for Side Stand to straddle while crossing, so check STAND diameter and purchase.
Installation itself is easy for Bolt fixing itself.
It took a while to determine the mounting position with the Side Stand raised.
Even with the STAND raised, it was hard to see visually from the straddling state, I thought it was a little longer but no problem at all.
When I put a heel in the tip part of STAND it became easier to put out very much as I became able to lower STAND.
View detail
It is appreciated to sell Small items.
I purchased it because I rubbed the footpeg and the End cap got scraped.
Manufacturer here handles it from these Small items, so it will be saved.
It is good that the price is cheap.
View detail
MotoCrazy Material: Stainless SteelFender Eliminator
I think that likes and dislikes will be divided by Fender Eliminator, but I personally purchased it because I prefer this place from the OEM's Number position. I am pleased that the Rear around is refreshing and the thickness of Tire is emphasized. Installation was also not particularly difficult, and it was easy to do comparatively. View detail