Reviews
Use with UniversalForkSTAND
The original UniversalForkSTAND receptacle was not a good match for my CB.
I tried this product with no luck and was very pleased with the results.
Firm Quantity:Pair (for Left and Right) There's no instability if you install it by looking at the Balance of!
View detail
It was featured on the Commander's FB page, so...
There doesn't seem to be a STAND that can front up without interfering with Cowletc. in KATANA.
I was introduced to it when I took a peek at the Commander's FB page, so I thought I'd buy it before it was gone...
At that time, Webike didn't have it, so I bought it from another shop.
The installation is not a problem at all, but I don't know if it is individual difference or the hole under the Stem of front 16in. second type KATANA is larger than other vehicles, but with 19mm diameter, it feels like a governor.
He's got a long neck, he's a governor, and he's on the Commander's FB. "Attachment causes Lever to take effect, so riding with STAND-UP, for example... I don't want to overload it because I was warned that I would have to.
In the picture that has been introduced is Black, but the goods that have arrived are per Large? Is it Gold.
It was a shame that it was scratched a little, but it will be scratched with use, so I gave it a finish.
View detail
Since there is no Stand Hook
I bought this one at the same time I bought STAND.
Easy to use, Exactly to Swing Arm.
View detail
I should have gone with this from the start.
At first I thought of using a v-shaped bracket, but I was not familiar with it and did not feel confident, so I chose this one. If you don't need to change the wheel, you can use the Excessive Bearing for Kawasaki. View detail
Reliable Brand
It is used for the maintenance stand of the short type of the same manufacturer.
If you're using a Stand hook roller, we recommend this one!
Once you get used to it, you will be able to clean the chain and wheel easily because the rear will be raised within a minute.
View detail
That's a safe J-Trip!
And when I say Maintenance Stand, I mean J-Trip!
It's safe to use!
It's a must have item in car wash and maintenance.
View detail
easy
Used for ZrX1200R.
Shaft bent easily.
Disappointing
View detail
Exactly.
This is a change from J-TRIP's L-hook. I like it because it fits the Stand Hook of the Swing Arm Option of GeeCraft. View detail
Maybe Large Sturdy
It will lift even 1200cc. View detail
Exactly.
STAND of J-TRIP (L-receiver) but I changed it to this one to match the OptionStand Hook of the Swing Arm of GeeCraft.
It is Exactly like an exclusive product.
I like it because it is stable and easy to maintain unlike the L receptacle.
View detail
Fits: BMW HP2, BMW K1200, BMW R1200, BMW R1200R, BMW R1200S, BMW R1300 R, BMW HP2, BMW K1200, BMW R1200, BMW R1200R, BMW R1200S, BMW R1300 R
For Maintenance
I use it on my R nineT.
I noticed that it was sold separately from the body after the body arrived.
Well, it's cheap, so it's like this... And.
I think things are very good.
View detail
I'm worried about the wound.
I thought the U-Hook was better than the L-Shaped Bracket and bought it.
The U-shape is more secure and easier to fit.
With the L-shape, you have to make the motorcycle somewhat horizontal to hang it.
I'm concerned about the BALI at the end because Bracket just pulled it out with PRESS.
I didn't want to damage my motorcycle with the Bracket, so I wrapped Vinyl Tape around it.
I want you to wear at least Cushion rubber. I wish you could wear Cushion rubber.
View detail
Great stability!
It is being used with a '14 MC41 CBR250R with their short roller stands.
It looks solid and sturdy.
There is no Gap or benting even if you rock it hard with the lifted up position.
The cheap STAND L-risers I used before turned round and round with no resistance and often turned in a strange direction when STAND-UP. (And the weight.) It is stress-free because you can STAND-UP in the same position once you decide.
If I have one complaint, it's the price.
When I used it, I was satisfied with it because it was good, but I hesitated for a moment when I bought it, thinking that it cost 3,000 yen for this as a part of the STAND;
MC41 CBR250R does not have hook bolt holes and Axle Shaft is not hollow, so there is no choice because you can't use V-support and first time support, but the stability is excellent even for L-support and STAND-UP is stress-free, so you can recommend it to others.
The Swing Arm on the Race base car has a hook bolt mounting hole;
View detail
Ninja1000 Mast by Items!
PURPOSE OF PURCHASE
Purchased for maintenance on my Ninja 1000SX.
Reason for purchase
Despite the maintenance hole on the Ninja 1000, the swing arm shape is not suitable for use with the V-budget, and the swing arm is likely to be damaged during work. The swing arm is not suitable for use with the J-TRIP swing arm despite the fact that it has maintenance holes for the maintenance hooks.
Reason for Brand Selection
BrandImage, but I couldn't find anything else, which is why it's so large.
[Impression]
There is an Instruction Manual in the package.
To summarize, the L-shaped Receiver Attachment is a quantity:Pair (for Left and Right) It is necessary to support the flat part as far back as possible, and the L-shaped curb should also be applied to the L-shaped curb, and two people should work together to put the L-shaped support on the vehicle in a horizontal position.
I see. Apparently, the vehicle is at an angle and the L-shaped receiver is placed on the Swing Arm with the Quantity:It seems impossible to set it unless you are an expert.
I'm glad I noticed before I had a fall. LOL!
So I'll use my Ethos Design EZ Stand Helper as a supplement.
The L-shaped attachment is made of a resin-coated material that is not slippery.
Quantity on the Swing Arm to ensure that the L-shaped receiver:I set it and lifted it up, and I could work without worrying about the L-shaped receiver being gapped or shaky.
This is my first time to use the L-shaped receiver, but once you get used to it, you may save yourself the trouble of attaching and detaching the hook bolt for the STAND.
View detail
I made it hollow and changed it to this.
It is very easy to use because it can be raised without worrying about the usual raising and lowering without removing the tire. View detail
Fits: DUCATI 1098, MV AGUSTA Cantilever Swing Arm All Cars, DUCATI 1098, MV AGUSTA All models with cantilever swing arm, MV AGUSTA All models with cantilever swing arm
Don't forget to buy.
Some people might buy the Rear stand and forget to buy the Shaft.
Buy the correct diameter for your vehicle and do not forget it.
View detail
![[Front Stand Optional Parts] Boss Collar 5-Piece Set](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0155/9451294_1_TS.jpg)
Loss.
When you buy a JTrip STAND, it comes with it, but if you only use it for a certain model of car, you won't use the other colors.
I lost my Large when I decided to use it for a different car model.
Next time I'll make sure to manage it so it doesn't get lost.
View detail
STAND and Quantity:It's not a set and will be purchased separately
Another Motorcycle uses a VHook, but this is the first time I've used this type of Hook.
It takes a hang to hang this Stand Hook on a motorcycle, but you need to set the motorcycle upright to get the Hook to work.
This is the way it was originally used in Race and is multiplied by PitCrew.
It takes time to get used to it and to make the Motorcycle vertical, so it's better to have the Motorcycle propped up if you're worried about it.
Otherwise, I had no worries.
View detail
Fits: HONDA CB1000R, HONDA CB1000R
Reliable J-TripBrand
As you may know, this is the only product that is compatible with the FOR JAPAN MODEL.
The J-TRIP is a highly reliable device, and its functionality is perfect.
I also did a Rear Up and Tire replacement with this product, but it did not become unstable.
However, the MinusPoint is very expensive compared to the other Attachments because it is a dedicated product, and if you combine it with STANDBody, it costs nearly 25,000 yen.
View detail
Large sturdy even without Stand Hook
I bought this for maintenance on my WR250X.
It was difficult to find the point of application of the Swing Arm's lower end, but once you get the point, you can use it safely.
No worries with the L-shaped hook + lightweight WR250X (134kg).
View detail