Reviews
Looking for something similar but can't find it?
It is rather expensive,
Plating of iron instead of Stainless Steel
Cap Nut in Flange without Serrete
Hexagonal section is long
I have not been able to find anything at tool dealers or other places that meets the requirements of the above.
I'm sure I can get them more inexpensively, but it's already too dull to look for them.
It is just right for use on the Exhaust stud bolt of the Exhaust System, where you want to avoid troublemakers and such when removing and installing.
There are no concerns about the quality of the plating, and no particular peeling or rusting appears even after long-term use.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Replace while opening Engine
Quantity like this:When it comes to Sets, there are some things that are not necessary, but this Quantity:Set is just what I need, so that helps. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Replace during overhaul of Monkey engine
I replaced it at the time of overhaul of the Monkey engine. Since it is a consumable part, I thought it would be safer to replace it at the engine opening timing, so I replaced it. View detail
Fits: YAMAHA TZR50, YAMAHA RZ50, YAMAHA TZM50, HONDA NS-1, SUZUKI street magic, YAMAHA TZR50, HONDA XR100 Motard, HONDA NSR50, HONDA Dream 50, HONDA XR50 Motard, HONDA NS-1, SUZUKI street magic, YAMAHA TZR50, HONDA XR100 Motard, HONDA NSR50, HONDA Dream 50, HONDA XR50 Motard
Is it a necessity if you want to Race?
[How is it used?
It was installed on the front master cylinder of a YAMAHA TZr50R under restoration.
It appears to be installed as Protection for Master Cylinder in case of tipping over.
Was the one you received as per Image?
I have an XJR with a Tank Separated Type radipon, so I did not know that this kind of product existed.
Was the installation difficult?
It's easy to change the OEM countersunk screws to hexagonal and install.
Master Cylinder's plate screws are easy to lick, so I would be grateful for a change to hexagonal.
How was your experience with it?
The previous owner had been playing Race and had solid fall scratches.
However, the Master Cylinder side was not affected, so it seems to be fulfilling its role well.
[Included Parts:were they on?
Hexagonal Screw
[Was there anything that disappointed you?
I think there are too few color options.
Color Anodized Aluminum looks cheap, so it would be better to have a more Large person color!
View detail
It stands out
It's just a Bolt, but it's beautiful and stands out. View detail
Fits: HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard
Total length 190-200
Excellent appearance and rustproofing performance.
I am using it on the APE100 at the same time as a Side Stand Bracket from another company, but it is too short and may cause the vehicle body to lean too much.
View detail
Windproof and light-blocking properties are good.
Purchased to prevent wind from getting into my eyes as much as possible due to Dry Eye.
I like the light weight, good Fit, and light shielding; I don't have extreme visibility concerns when in the Tunnel.
The item arrived and the Left Arm came off immediately.
I reinserted it, but it did not seem to be inserted properly. Since then, it has not come off.
It was a product that I would like to repeat because it is cosmetically pleasing.
I gave it 4 stars because the Arm was not inserted properly.
View detail
One point
I used it for One point around Handlebar. It is a completely self-sufficient part. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
wait-and-see
I bought it thinking it was a faulty OEM Relay, but I never used it due to poor contact with the wiring, but it is made by POSH, which is reliable and almost half the price of OEM parts. "No sound." If you don't mind the "I'll buy it", I think it's a good buy.
I wonder if OEMRelay is being UPDATED. (!)
View detail
It looks very nice
As the product photo shown, the grip is very classic and comfortable. Its look is quite similer with Bitwell Kongfu grip. View detail
Ideal for crime prevention.
This is no longer an exquisite product.
The combination of anti-tinkering Torx bolt and anti-loosening Nut is kind.
The design is simple and the color line nap is abundant.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Beautiful nuts
I bought these nuts on the Honda SuperCub and Monkey - they fit both motorcycles. They are not expensive, but they protect the screw from harmful influences from below. The quality is good. I bought these nuts for a Honda SuperCub and Monkey - they fit both motorcycles. They are not expensive, but they protect the screw from harmful influences from below. The quality is good. View detail
Fits: Others NS1:NSR50:TZr50R:TZM50R:RZ50:MONKEY 12V:GORILLA:APE50:APE100:TW:SR400:SR500 etc
Colorful and Beauty.
[How is it used?
I purchased this product along with a plug replacement because the Engine was not working properly.
Was the one you received as per Image?
It was softer Material than Image.
Was the installation difficult?
Simply replace with OEM Plug cord & Cap.
How was your experience with it?
I am not sure about the functionality of the engine, the startability of the engine was not different and I could not feel any difference.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
The functionality did not change, but the appearance became Beauty.
▼I might be able to tell the difference if the body is an older year, but I couldn't really tell.
View detail
Firmly usable
[How is it used?
I used it when I changed the Silencer on my YAMAHA XJR400R from MotoGEARΦ100 to K2tecΦ86.
The Φ14 thinner Silencer band is now farther away and cannot be handled by the existing Bolt.
We measured the amount of gap and decided to put aluminum collars on the rear suspension and silencer band side to fix them in place.
How was your experience with it?
The measurements were perfect and firmly fixed.
I have also done a good job of Torque management, so I don't think there will be any problems.
How did it compare to other products?
This time I bought 80mm and 50mm.
Home center also sells Bolt, but basically they don't sell P1.25, so you have to buy it at motorcycle supply stores or on the webike.
I think it's good
[Points to note]
Aluminum is surprisingly soft.
Be careful when working with Overtorque, as it can easily be severed when tightened with Overtorque.
View detail
pochPlug cord
Used on a Uotani Coil. Perfectly sized and installed with no problems. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
High Class Accent!
These Posh 24K bolts are small bits of quiet elegance, like fine jewelry. I am very impressed by the presentation! The price is a bargain! My Web!ke Japan feedback is 100% for product quality, speed of order processing and shipment. Keep up the great work friends! View detail
It has a sense of luxury.
Installed on PCX160.
It is quite luxurious.
Reflector is also satisfactory with good design.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
It can be used for CD90!
[How is it used?
The shape changed and hardened over time, leading to the purchase of a new one.
How was your experience with it?
Elasticity returns and Oil does not drip.
You can operate the system without worrying about leakage.
How did it compare to other products?
OEM Parts is slightly cheaper, but I was in a hurry.
That said, the price difference is within the margin of error, so you should purchase according to Timing such as Sale.
[Points to note]
Material when exposed outdoors for years.:Deterioration is inevitable because of Rubber products.
Recommendation for periodic replacement.
O-rings, which are not oil-resistant, are sold at home centers as water supply packing, but dedicated products are safer and more secure.
View detail
Buy with brake lever set change
The finish looks good and I'm satisfied with the design I want Recommended as a mirror hole replacement when changing the genuine front brake set View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA XR50 Motard, HONDA XR100 Motard, HONDA Ape 100, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard, HONDA Ape 100, HONDA Ape 50
first-time entrant
I replaced it because the Engine suddenly stopped working and I felt the spark was weak. It looks good and is a good product. View detail