Reviews
It's just right for me, as I don't want to be too big
I changed to this one because of the large size of the OEM Screen that doesn't seem to be available
I didn't like the other Large Screen, so I decided to use this Small Screen On Screen
The effect is that the wind that was hitting my chest area on the OEM is now hitting my chin area
I've gone on 100km or so of touring and the fatigue level is still different than the OEM
It would be more effective if it was a Large screen with a very Adventure-like style is probably Large, but for those of me who prefer a slouchy style, this is more It fit
Japanese version of the Instruction Manual for installation But I can do it by myself without any problem However, the braid on the edge is a bit long, so you need to cut it while watching the position
View detail
Great
Good afternoon, thank you very much fast delivery, great product thick glass, perfect for mf08. Good afternoon, many thanks, fast delivery, great product thick glass, perfect on mf08. translated by Google Translator View detail
Disappointing because I had high hopes for it
When I installed it, I thought that the impression was very different from the photo on the introduction page I did
The real thing is generally rounded and stocky
This was a personal no-no on this point, but it looks cool from some angles, so don't underestimate it
As far as installation goes, it was the worst It doesn't mate at all (lol)
I forced the Screw to fit and install it
Is that how it's designed? But it took quite a bit of Stress, so I guess it's just bad machining accuracy or bad design
As for the key rectification effect, I honestly couldn't tell the difference between it and the OEM
Is it slightly better? That's about the extent of it
I bought it expecting to reduce wind noise, but it didn't serve the purpose
If you're not unhappy with the OEMs, then you shouldn't touch them
View detail
NORMAL and Large size are not much different
The OEM ratio is +40mm, but the appearance of the large size is not much different The overall length seems to be 40mm longer without the cut The width of the uppermost part seems to be a little wider than OEM
There is no problem with the windproof effect, but I do not feel a large change from the OEM Because the upper part is not concave, I feel that the wind that hits the vicinity of the neck decreased because it is not recessed, but perhaps because of that it hits the shoulder I think it feels like a lot of wind
Since the appearance of the front will change, I think of it as more of a custom look than an increase in wind protection You may want to do this
View detail
Fits: KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG), KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX400
It is light and durable
I installed it on my HONDA AX-1 and it was good
I installed it on my HONDA AX-1 and it was good
I installed it on my HONDA AX-1 and it was good
I installed it on my HONDA AX-1 and it was good
I installed it on my HONDA AX-1 and it was good
View detail
Fits: KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG), KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX400
I diverted it and installed it in another car
I got a HONDA AX-1 and it was a bit expensive, due to the fact that I had to travel a lot on the highway I decided to use this one because of its appearance and windproof effect The installation was done with the understanding of the home center It is fixed in combination with brackets
View detail
If it's not available, it's Garbage
The installation hole of Bracket is small on one side, and you have to turn the bolt to get in
It's as tight as making Screw holes
This is why the Bolt is at an angle
I put a bracket on the bolt of Top Bridge
Impossible to install due to interference
I had a bad feeling when I put the well nut on because the size of the hole was mixed, but I didn't expect it to happen I didn't realize how inaccurate it was
When I purchased MRA's Screen-only products for other vehicles, it was nothing, but the Gold genus The crafting accuracy is terrible
View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
Best for Touring
As I am mainly touring, I bought this product to reduce wind fatigue The effect is good, I feel that my body is completely in the Cowl when my head bends down a little However, before I knew it, the Cushion rubber went somewhere and the Chatter sound was not good Although the problem has occurred, it is being repaired by Universal Product View detail
I've heard that foreign products aren't good, but not this good
Installation seriously sucks!
The holes don't fit and can't be fixed, so I was able to use the OEM's to match them and put them on
There's a little gap in the center 。
No foreign products
However, the rectification effect is good
Compared to the NORMAL Screen, it is quite preventable
What a waste
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG), KAWASAKI ZRX1100
Is good!
I wanted to improve appearance as Parenthesis, I wanted to improve the windbreak effect, so I watched various reviews this time and selected the Touring type of this MRAScreen.
I did not feel the big difference so far in the lower downhill leg speed..
Collar made it Smoked color so Meter has improved ease of viewing to Large width.
Windbreak effect on expressway has been improved to Large width.
The wind which had been hit hard near the chest so far improved from the jaw of the Helmet to the vicinity of the Shield, making it much easier for the high speed cruising.
View detail
The height and height are now one,
For XSR 700, I bought it for the time being, but I got strange feeling of discomfort and windbreak effect is not so much better than I expected, XSR is difficult to install because there is no room for Handlebar, this product is Light Bracket It is Type to fix. I bite Light Shack with Light Bracket and use it. View detail
Effective
Mounted X-creen, mounted. Mounting position (You can check the position to drill hole from MRA's HP) We made Zero the wreckage of insects attached to Helmet 's Shield at a position which was adjusted considerably by considerably adjusting angle.
It is in item description (Included Parts : Windscreen Mole) is sold separately. Even in the absence of X-CREEN, the width is wider than the OEM Screen, there is a height, it is possible to reduce the wind pressure to Helmet by adjusting the height, but when running on a national highway along the coastline and running on a windy day or breaking or cracking Although there are no breaks such as but, Screen is quite considerable (It was the highest position)
The biggest problem is mounting. It is difficult to tighten Screw while holding two Spacers between Screen and Bracket.
View detail
Considerable improvement
I chose Smoke Type. Quantity is also higher than NORMAL : Pair (for Left and Right) It becomes Large, too, but the angle is sleeping It is unexpectedly a Compact impression. Smoke, but its transparency is high and it looks better. Because it is too beautiful, I was worried whether I could scrape with Bike Cover and get scratched. For installation, remove 4 Screws in 3 mm Hexagonal Wrench and tighten again. It will not take as long as 5 minutes. However, different packaging Edge rubber (It is made of PVC) It was a little troublesome to install hang.
When checking the effect on the expressway, the windbreak effect is more than imagined. 100 km by NORMAL / Although it becomes gradually hard even for h cruising, after leaving a room we can afford. Rather, I want to raise the speed a little more and run.
I feel the wind moderately at the speed of an ordinary road and it seems there is nothing to be troubled by the hot summer days.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX400, KAWASAKI ZrX1200 DAEG (ZrX1200 DAEG), KAWASAKI ZRX1100
If the price is a bit cheaper!
It is an exchange from the pouch's Touring screen Dark smoke. Mounting is MRAScreen Touring. The color is Black instead of Smoke.
I like the long type Screen so I made it to the Touring type instead of the Spoiler type.
The picture will be a comparison of Pucch's Touring screen and MRA's Screen Touring so I think that you can refer to the purchase.
First of all it is color but because Puc's Screen selected Dark smoke and MRA chose Black, the color is darker in MRA. It is completely black. Because there is a Wound in the vicinity of Cowl's Screw hole, it is Black based on the meaning to hide it.
Although there are many people who have been struggling to attach a mall if it is Review of other people, I did not wear a mall. Processing of the border was also very beautiful even if it was not attached, I think that there is liking, but I like Premier without Mole in Sharp.
With regard to wind protection, the difference is not felt much. Of course it is totally different as compared to NORMAL because it is long.
Regarding Fitting, NORMAL, Puchi, MRA and none are great Fitting. No problem.
Although it is the most important appearance, MRA has rounded upper corner, it looks to Sharp. The pouch is a headache impression.
By the way NORMAL is a bit somewhat lacking Image. Lol
Fitting in the overall review, Balance of the appearance, I like it very much.
If the price is a bit cheaper, I think that is still better.
Quality is high so it can not be helped.
View detail
Fits: SUZUKI GSX-R750 R, SUZUKI GSX-R1100, SUZUKI GSX-R750
It is good
It is good to be large, I used it to adjust Forme as a whole of Motorcycle, it will be the GOOSEMotorcycle position of Mad Max.
I think that there are individual differences, but adjustment of mounting holes may be necessary.
View detail
Fits: SUZUKI GSX-R750 R, SUZUKI GSX-R1100, SUZUKI GSX-R750
I think that there is no other total height feeling
I installed it in the Initial Model 's GSX - R 1100.
Since the position of the Screw hole was gapped in one place for installation, we processed it now.
The bottom edge of Screen interferes with CowlingBrace so it was removed.
View detail
Fits: SUZUKI GSX-R750 R, SUZUKI GSX-R1100, SUZUKI GSX-R750
I think that there is no other total height feeling
Initial Model's GU 74, GSX-R 1100 (G to J) I installed quite a lot, it is quite Large.
The hole position was Gap in one place so we processed it at the present time.
Front Quantity : Pair (for Left and Right) Since the bottom edge of Screen hit CowlingBrace 's part, it was processed and removed.
View detail
High rectification effect, firmly feeling good!
MRA 's Screen has two holes, but when rain falls around Meter! I do not want to ride or rain when it is about to rain! The one who does not use it It is good.. The reason why the hole is open is that when you run, when you hold your hand, a breeze hits the Meter. In the car, Defferential Gear (Fogging) It seems to be due to the effect. (Other party information) I do not think about the effect much, I use the MRA by just looking and feeling firmly. Position of the hole is also good, it does not need processing, Pon attachment! View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It's a nice feeling..
The hit of the wind will change It is very comfortable.
It looks better than NORMAL 's Screen, compared with NORMAL' s screen, it is easy to install, but if Rubber 's Nut holding the Screen of GSX 1300 R HAYABUSA is collapsed and fails to pull out, RubberNut will be torn out Of RubberNutQuantity : 2pc. If you prepare a set you can also perform installation on Smooth.
If only one thing I let you say, the price is expensive! I think otherwise.
View detail
Perfect for S4Rs - I was able to install it firmly
StylingMain, Plus We wore it expecting some windshield.
Somewhat tightly, of course it could fit perfectly with no machining. It is very firmly attachable, good accompaniment, no glittering etc.
It is settled by the Smoke Type, the screen high is slightly higher than the OEM, and the windshield effect at the time of high-speed running came. (High speed driving is unidentified)
In addition, we recommend Well nut's replacement when replacing Screen. Let's prepare in advance.
View detail