Reviews
No complaints, excellent items
? 【What made you decide the purchase?】 It is stated that the tip is thin by imprint. I was looking for a thin and easy to use Lever.
? 【How was it actually used?】 It is considerably thinner than Lever of about 1 to 2000 yen. Moreover, it is strong.. Lever with a thick tip needs to be inserted all the way in, so it is easy to chew Tube, but it is very easy to use.
? [Is there anything I was disappointed about?] Nothing in particular.
? [Request to Manufacturer - Please tell me if there are any improvement points】 Grip is good because black is not so noticeable dirt but Red or Color Grip is good.
? 【Have you compared items?】 There is none
? [Others] We will have a reasonable price, but the Air leaked from the Tire that we built together. Because there are many people using a high Heavy tube because it opens a hole in the Tube. Although it is hard to chew a thick part, if you use this Lever of a thin tip, you can assemble without chewing even with an ordinary cheap Tube. In addition, please correct the hole of Tube and Tube - - If you are an experienced person, I will Recommendation to use. The pair is also comfortable.
View detail
Very easy to use
Until now Tire Lever used the unnamed overseas Manufacturer as if it were the same
This idea was a mistake.
Ease of work is completely different.
Although I might not think about replacing Tire Lever at all, if there is opportunity
We recommend you to replace with Lever.
View detail
Just right Length
Until now (210 mm of KTC) I was exchanging tires only. So, compared to that, 260 mm was much easier to do. However, rather than imagined from the shape of the spoon, it was not easy to enter the rim. (I firmly coated the beat cream) I felt it was okay if the angle of the spoon was a little wider. I can not say exactly because I never used a lever from another company. The grip with the rubber was put on the force without putting a burden on the hands. I used 210 mm for tooling, but I have to buy it and I can not bring it even with 260 mm. It is better than struggling with 210 mm. View detail
It's neither good nor bad.
It's Tire Lever so it does not change much with other things, but it did not hurt Rim and it was nice and easy to use.
In addition, Quantity : I think that it is better to buy it with 2pc.
View detail
Because it has a good reputation...
I used DAYTONA's Tire Lever, but many people have a good reputation [KTC MCOL-206] I bought three of them.
It's clumsy, but I only want to use good tools... (Because the tool is also a hobby)
I have not used it, but I think that the impressions I tried are the same as you.
View detail
It became easier to work
As others say differently, the tip of Lever is thinning. Therefore, it can be placed in a narrow gap, making the work very easy. The thickness of the tip is about 1 mm slightly. What I have from the past is 2 mm. It is nearly half the thinness. Quantity : I bought 2 pc, but I thought that I can buy another pc.
View detail
Tire Lever
In the past I was exchanging the Tire with cheap Tire Lever, but I thought that the tip was thick and it was painful not to get into the gap well. After that the reputation of Tire Lever here is eloquent so if you buy it and use it it makes it completely different and easy to use, I wanted another one and decided to purchase this one.
I can work quite efficiently, so I will recommend it to those who will exchange Tire by myself.
View detail
Reliable Tire Lever
I started to do liter Class Tire hands on my own, initially for Large Small Tire Lever for Vehicle
Even though I was using it, I was able to do it for sure, but I made this Lever so the working efficiency got higher with Gun.
Even with RimProtector, even in a small gap between Protector and Tire
It is easy to slip in and it is easy to slip out even when inserted further.
The thinness, rigidity and shape of the tip are exquisite.
If it is slightly thick or if the Curve is too steep, it will be difficult to get in and out as soon as it is done.
And it takes extra time by doing grinding Lever, at the worst it will scratch Rim.
Strong rigidity is wonderful.
If it is inexpensive Lever "Does Lever turn?" Even in the case of applying loads that worry about,
Because this Lever has a flat face, we will apply a load with confidence and challenge the final phase of Tire exchange work.
Lever seems to bend along the way, I never thought that the tip seemed to crack with Parkin.
Rubber Material of the hand and good shape are spurring it.
Especially people who do not want to scratch Wheel think that combination of RimProtector and this KTCLever is an essential part.
The other day, I just encountered a difficult Tire that seems to be unreasonable and abandoned
This Lever got me over it. I could not do it without this Lever.
I appreciate it..
View detail
Very easy to use.
The flat part of Grip works very well when fixing with the foot, and the previous part is also very easy to use. I think that it is a well-thought tool. I am worried about buying another pc. View detail
Lightweight, Compact, somewhat usable
Basically it is not a stationary tool but a carrying tool.
Light, short, flat shape so it's bulky.
The performance as a key Tire Lever is not compatible with a thin Spoon type.
Compared to that, it is still short, so I need power, somewhat thick dish surface is difficult to hook and hard to turn.
However, it can be used normally. Maintenance is easy as well as rugged because it has a simple shape without a grip portion etc..
It is a Material of smooth texture, but it does not slip even with oil, so that point is safe.
However, since there is not much smoothness, careful work will scratch the Rim and be afraid to attach the Wound so be careful.
It was not bone but quality was like good atmosphere that I wanted to touch without any meaning.
However, if you are using at home, if it's Main, we recommend a thin SpoonType with Grip with long handle, you can hold it firmly.
View detail
Although the Tire lever was already owned, it newly purchased by the addition.By the picture, although it may be unclear, compared with other Tire levers, as for the Tire lever of KTC, the rack portion at the tip has become more gently-sloping.
Although the Tire lever was already owned, it newly purchased by the addition.By the
picture, although it may be unclear, compared with other Tire levers, as for the Tire lever of KTC, the rack portion at the tip has become more gently-sloping.
When inserting a Tire lever by the difference in this curve, inserting in a Smooth is more possible than other Levers.There is a time of a Lever plug stopping succeeding at the time of
Tire desorption.It is certainly then helpful.
Even when it already has a Lever, the Recommendation of adding this one is carried out by all means.It worries about whether for it to be user-friendly and to make all this.
View detail
what has a good Lever -- the Tire lever made from KTC was chosen by saying. since a Tire lever besides has not been used, the comparison of a using feeling cannot be performed, but it is very easy to carry out tire replacement -- a Lever --
what has a good Lever -- the Tire lever made from KTC was chosen by saying.
since a Tire lever besides
has not been used, the comparison of a using feeling cannot be performed, but it is very easy to carry out
tire replacement -- a Lever -- dissatisfaction -- it is absolutely none.
A crack is hard to go into a Wheel by structure also with a beautiful portion of the
Lever.
It seems that it is completely different although the cheap Lever was also seen.
Form is also often ? again.
Since it was big-ticket, it wavered, but rather than damaging a Wheel was thought and it purchased.
Two of this Lever are used in the case of
tire replacement.
View detail
[Webike Monitor] Since grip portion was resin, even if it made it bend strongly, it has worked without difficulty. As the form of the portion hung on a previous Tire had a Know-how again, it was very easy to remove a Tire.
[Webike Monitor] Since
grip portion was resin, even if it made it bend strongly, it has worked without difficulty.
As the form of the portion hung on a previous Tire had a Know-how again, it was very easy to remove a Tire.
View detail
Since the Tire lever of a DAYTONA had dissatisfaction a little, it purchases as a Tire lever to three flat knots. The photographs are a DAYTONA Long tire lever from a top, a DAYTONA Tire lever, and KTC260. It is easy to put in the tip of KTC260
Since the Tire lever of a DAYTONA had dissatisfaction a little, it purchases as a Tire lever to three flat knots.
The
photographs are a DAYTONA Long tire lever from a top, a DAYTONA Tire lever, and KTC260.
It is easy to put in the tip of
KTC260 between a rim and a Tire most thinly.
Although individual user-friendliness tends to put in a DAYTONA Long tire lever and KTC260 equally, when using the Lever after it, a DAYTONA Long tire lever is easy-to-use.
It is although this is unavoidable since it is a problem of die length.
View detail
[Webike Monitor] The picture becomes the comparison with the thing made from a Professional tool. picture top becomes a thing of KTC.Although I think whether user-friendliness changes if it only uses once [ honest ] although the Tire was
[Webike Monitor] The
picture becomes the comparison with the thing made from a Professional tool.
picture top becomes a thing of KTC.Although I think whether user-friendliness changes if it only uses once [ honest ] although the Tire was replaced this time [
] using these two, the direction of the thing of KTC has the good texture of a Plating too obviously.I think that
KTC can be used as a thing throughout life.
, of course, user-friendliness is also the highest.I consider [ being just going to change by the way and skill which are in fashion in whether the
Wheel is damaged, and ].
View detail
As what is called a Spoon Type of a Tire lever, it is a time-tested product.It is more convenient for there to be two in Tire clearing work.Although there is also a cheap imitation these days [ ], this product is clearly a little superior well [
As what is called a Spoon Type of a Tire lever, it is a time-tested product.It is more convenient for there to be two in Tire clearing work.Although there is also a cheap imitation these days [
], this product is clearly a little superior well [ of tip form (condition of thinness and an R), and Plating finishing ].Although it cannot say truly that he has no Rim protector, it is easy to insert and difficult to give a crack.The Rubber grip of a Lever end is also kind to a hand.Since
die length is 260 mm, it may not go to the reason for calling it omnipotent, but the turn of the 500 mm of last Class may surely come, but general work is managed satisfactorily.
View detail
The Lever of the ordinary Bar type was used until he bought this. a tip being thick, and being hard to insert between rims, or involving in a Tube because of the thickness in case of a usual Type, -- when the worst, it is a crack to a Tube -- there w
The Lever of the ordinary Bar type was used until he bought this.
a tip being thick, and being hard to insert between rims, or involving in a Tube because of the thickness in case of a
usual Type, -- when the worst, it is a crack to a Tube -- there were also things very.
Work became really easy after using
, however this.
Since the tip is thin, it is easy to make it slide in first.
It is easy to grasp
and a Grip, and die length is also right just and it is easy to put in power.
Since it is not necessary to cut a Tube with this price and considering
workability working hours can also be shortened substantially, he buys it and is Satoru Taisho.
When this is used, it is like [ which he would like to use the usual Bar type and is lost ].
It is one of the tools to certainly put on the Garage.
I think again that this price is also more enough as the sense of security of KTC than anything.
View detail
[Webike Monitor] It was used for the tire replacement of the SEROW225 WE. The Tire lever of DRC was also purchased simultaneously and was compared. KTC of the point is thinner and it is easy to put a Lever into a crevice. It felt
[Webike Monitor] It was used for the tire replacement of the
SEROW225 WE.
The Tire lever of
DRC was also purchased simultaneously and was compared.
KTC of the point is thinner and it is easy to put a Lever into a crevice.
It felt so that in a user friendly manner [ the Curve of
point ].
It does not understand, unless it however uses simultaneously and compares.
Since it is use of only after [
] once, it does not understand about durability.
It is better for there to be three Levers as you are written.
View detail
Although Spoon portion is thick although the Tire lever with a Wrench of DRC was used until now, and it was hard to insert, KTC was thin and charge became good large shortening of working hours. It is satisfactory although it is a little expensive.
Although
Spoon portion is thick although the Tire lever with a Wrench of DRC was used until now, and it was hard to insert, KTC was thin and charge became good large shortening of working hours.
It is satisfactory although it is a little expensive.
View detail
It is very easy-to-use. both thinness intensity and die length -- although -- I think that it is the optimal. Although it used having heard reputation with the good-quality item, to be sure, it is the highest. Although desorption of the Tire was do
It is very easy-to-use.
both thinness intensity and die length -- although -- I think that it is the optimal.
Although it used having heard reputation with the
good-quality item, to be sure, it is the highest.
Although desorption of the Tire was done with this 1 and two cylindrical Levers, it was not so efficient and carried out at the
beginning.
When this article was increased to three the other day [
], the Bead could be taken very much in and out of a Smooth, and it became the completion of work immediately.
It is the highest.
Although the amount of money increases just for a moment, we recommend you to arrange these three Levers in the case of Tire desorption, and to face them work.
View detail