Reviews
Fits: YAMAHA FZ1-N 2008, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ8, YAMAHA Feather 8, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather
It looks good now but it is reasonable with Balance with Cost
Engine Guard is on sale from each company, but this is considered best if only Cost.
With regard to installation, we completed it in about 10 minutes if it carried out according to the Instruction Manual. Once Jack hit the bottom of the engine lightly and tightened Torque was also 50 N ? m. Extension ROD of Torque wrench is necessary because Bolt head becomes deeper Body. Because Bolt included is Hexagon Bolt, Merit is also unnecessary for some other company's cap screw tip bit..
However, the appearance is inferior compared to other companies. Body is a conical surface slurp and there is a large difference in design such as Design made by another company, decorativeness, Slide mechanism, protrusion length. (Although it is personal subjectivity)
function (I can not confirm it) Cost performance is good and it is expected that damages such as Cowl and footpeg will be suppressed to the Smallest limit from Projection Length which is also a bad appearance.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
very good.
Despite the end of the year, it was quick response. I think that it was good to attach the appearance well attached. However, since performance evaluation is Slider, I do not understand, so I am sorry. (T ^ T) Cospa is also good and is recommended.. View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
I am saved three times without scratches on Cowl.
Slider alone can not prevent it, but with Slider, Side cover and Exhaust System it will not hurt Cowl. I am saved because Cowl is expensive.
High SIDE Slider cracked even when falling down Bolt of the root broke, but Cowl was saved without Damage. Repair is cheap because we can also order parts by parts shop.
As in a certain Manufacturer, it will not loosen or be lost while driving.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
I bought a peace of mind.
Although I have never stood upright for more than ten years, I wanted to avoid only being unable to run at the destination, so I chose it as a Cost-free one. Immediately after installation, I was concerned with the crisis but on the contrary this leads to a sense of security and I feel that I am not at all concerned while driving.. The Guard of this hand has various things, but it is attractive that you can attach it to Simple without damaging its appearance. The effect is... I do not know because I was not standing (Lol) View detail
Fits: HONDA CB400SF Spec-II, HONDA CB400SF Spec-I, HONDA CB400SF Revo, HONDA CB400SF Spec-III, HONDA CB400SB Revo, HONDA CB400SB
Perfect in everything
About 10 months after installing this product, it was finally getting indebted. While traveling on the main road the other day, the car came back on the road and the place was gone, falling while sliding into the Green zone of Left Side. Fortunately the injury is bruised, Motorcycle also thanks to this, it was really saved because I finished with the Scotch Wound about the Engine. Just branch of the tree hits Screen, which makes it impossible to recur and shows the magnitude of the impact of the accident. Since Slider also has a sharp corner, if you think that there was a pretty Damage if it was not attached, I would definitely recommend this. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Because it is cheap
I installed it in zx 14r. Easy to install, tighten the Engine mount bolt, just tighten the included Bolt with. However, Engine mount bolt was pretty hard. Of course it is natural.. I think Cospa is very good. View detail
Fits: HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250, HONDA Hornet 250
It is a must-have classic Parts.
It is essential Parts that everyone is attached, Material is also firm and feeling good texture.
I think that it would be possible to become One point Accent when there is paint color besides Black.
Installation is also very easy, and there is also an appearance Impact and I am satisfied. Can I make it a little cheaper?
View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg
Evaluation by appearance because it is not overturned
? 【What made you decide the purchase?】 Mandatory Others Manufacturer is cheaper than
? 【How was it actually used?】 I do not know because I have not toppled
? 【Was it difficult to install? (Hard parts case)】 Any
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?] Not required
? [Request to Manufacturer - Please let me know if there are any improvement points】 Required Design is a little cheap
? 【Have you compared items?】 Required Trickster
? [Others] Any
* Optional items can be filled in as much as possible.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
After Slider installation
I installed this product, but recently I stood up so I would like to report it.
It was Right Side who fell over.
First of all, Damage to Cowl decreases.
However, it seems to be only in the surrounding with Slider.
Actually, before slider installation, I knocked down to Right Side once, but Damage other than around Slider seemed not much different from last time.
Even so, I think that I was able to make it easier than last time somewhat, and I think that I was able to reduce Damage to the car body so I was glad I bought it.
The wounds confirmed after falling are Under Cowl, Brake lever, Grip end, Silencer, footpeg (Including Tandem Footpeg)
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Easy to install if there are tools
In general I think that Hurdle, the best in installing a Slider, is drilled.
However, since there is a pattern paper in this product, just cutting the pattern paper and matching the pattern paper to the appropriate position will result in a certain drilling position.
Although it is written that it drills with 20 Hole saw and finally it expands the hole to 22, in the instruction manual it is written that it is deviating the hole, but in privacy, pillar is 3 to 10 → fillet for Impact, I thought that it would be possible to reduce the error of the hole position by spreading out like.
By the way, I used a column file of electric drill Impact compatible from 20 Hole saw.
Cowls are not removed at all.
Working time was about 30 minutes.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
I am satisfied although it is troublesome to drill holes.
Installation itself is easy, but I was worried that drilling was troublesome .... I am freeing up the drawing of the hole drilling place, but opening the hole in Cowl was still exciting thing lol. When I installed it, I was satisfied with Size because I did not want Clearance with Cowl and overhang from Body to be so conspicuous at the lowest place.
However, the attached Sticker is out of the question, I wonder if it was a letter printed and engraved like other companies ~
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Installation was also easy.
I wore it by myself, but it was easy to do.
Gold Although it was cheaper than other Manufacturer's items
The appearance was satisfactory finish.
I would like to be careful not to take care of Slider.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
I asked the Motorcycle shop for installation
I've installed a good reputation here for safety just in case. I think Cost performance is good as the price is reasonable, too.. View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
Inexpensive and Simple products.
I attached it to MT-09.
I already have a set of Engine Cover of GBRacing, but since the defense around Radiator was uneasy, I bought the cheapest and simplest looking Engine Guard made by DAYTONA - I installed it.
【What made you decide the purchase?】
Products of other Manufacturer are adopting Bracket of Aluminum Cut-out, etc. It is luxurious finish, but such Parts prefer preference to Simple as little as possible, so it is inexpensive and Simple looking Engine made by DAYTONA I chose Guard.
【How was it actually used?】
Although taking in and out from the premises became a little troublesome, if you consider the emergency thing, I can not say luxury.
Perhaps it is effective for stand-up gesture, but I felt that Damage seems to be in the Engine or Frame when falling in the state that speed is coming out.
I do not know until this is actually only a fall ....
【Mounting was difficult?】
Just remove two fixed Bolt of Engine and replace it.
Even an amateur like me can be worn within 15 minutes if there are suitable tools.
It is ideal to fix with important Torque as described in Service manual using Torque wrench.
【Please tell me the installation point and hang】
I fix it to the part with heat, so if you can apply Thread compound to Screw mountain of fixed Bolt if possible, I think that Maintenance after the next time will be easier.
[Is there anything I was disappointed about?]
I felt the overhang was Large more than I thought.
Since it protrudes about several centimeters than footpeg, I think that it is better to refrain from slipping past until it gets used to it.
【Hope for Manufacturer - Please let me know if you have any improvement points]
nothing special.
【Have you compared items?】
babyface 006-SY017Fb
Because it looks good, I put this product also as a candidate, but it was expensive than Daiyon a product, so it was removed from the candidate.
[Others]
If you are not committed to Brand or texture, this Engine Guard (Slider) I am buying.
Since installation is also easy, it is not good if Engine is still a no-guard person in the candidate?
View detail
Fits: KAWASAKI Varios 2, KAWASAKI Varios 2, KAWASAKI Varios 2, KAWASAKI Varios 2, KAWASAKI Varios 2, KAWASAKI Varios 2
Engine protector
I bought it for insurance
Buy and install it, Quantity : Pair (for Left and Right) I felt it was quite different from Large Kimono. I think that Right is Large more than once!
I am not particularly concerned when running
I do not really understand the performance because it is not moss, but I think if you buy for insurance!
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
Perhaps I can not protect perfection - - -
Perhaps Molly Bolt bends and I think that DURACON can also be scraped, but I thought that it might be possible to reduce damage somewhat, but I installed it. Pretty good protruding but perhaps Clutch cover and point cover can not be protected?
I think that it is better to add footpeg as Fixed Type or add another one.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100RS
For anti-fouling measures
Approximately 60 years of age comes near, honestly, concerning the Motorcycle of a car weight close to 300 kg, the worry of gobble becomes considerably high ... Is it only me ... Well anyhow so , Especially in the case of Large type TourerMotorcycle with Cowl, we thought that anti-fouling measures are essential and decided to use this Protector.
Results are not gobble at all so far for some reason after installation. This probably means that you installed this Protector "You can go for it at ease" (?!) Perhaps the margin of the mind might make it so ... (^ _ ^; In any case, I tried installing this Protector, it was quite Parenthesis well, I think the atmosphere that I saw from diagonally around in particular also got even better.
So this Protector, from a standpoint of protecting the body in case that a powerless Rider like me gets on the Large type Motorcycle, from the viewpoint of protecting the car body, also from the viewpoint of Rider's psychological sense of security (Is it an implicit effect? I think it is also recommended from the perspective of.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
Amulet, a kind of Parts.
As an Engine Protection Parts I thought it was a fairly cheap class so I attached a talisman.
Perhaps we are weak to Guard when the speed comes out, but it may be effective for sudden Fall down.
I am wearing it with a comfortable feeling.
If you look at Single Body, it is recommended not to worry much if you attach it to Large.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
I feel the effect as soon as possible!
I tried the effect I did not want to do as soon as possible in a week.
I can not hold on to the stall but it's slow!
But thanks to Protector and OEMProtector there is no big scratch,
Moreover, this Protector also polished with a little paper so that it became a new article.
If not installed, I think Engine or Cowl was hurt.
I'm glad I could put on it..
View detail
Fits: HONDA CB400SF Spec-II, HONDA CB400SF Spec-I, HONDA CB400SF Revo, HONDA CB400SF Spec-III, HONDA CB400SB Revo, HONDA CB400SB
Attach to cb 400 sb
It was good with a little Small than I saw in the picture. I was surprised that the Large qualities of Right Side and Left Side were quite different. Let's be cool as it looks cool. I also planned to have insurance when I fell over, so I bought it, so I would like to run so as not to take care of me. View detail