Reviews
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
I think it's good…
I thought that if I reduced the Damage with standing gobble I attached it like a charm. Cowl requires drilling but since there is a pattern paper it can be drilled to drill. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R
It is largely satisfactory.
I am happy to be able to buy it at a price of about half price compared to other companies.
It is nice to be cheap, but if possible Material : I wanted Bolt of Stainless Steel and also added Nut.
View detail
Fits: HONDA CB1100, HONDA CB1100 RS, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP
Satisfied with Cost performance
When attached to cb 400 sb, this helped reduce Damage when it fell down, so I bought it this time for safety as well. It's cheaper than other Manufacturers, but the effect has been proven, so I made it. View detail
Fits: YAMAHA XSR700, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07
I did a good job.
Impression as I experienced SlipDown at Corner and experienced the effect of this product.
First of all, the purchase motivation of this product was cheap, because the height of Protector was reasonable, so expect that it will make the Damage at the time of fall over the smallest limit and purchase.
Installation is easy, remove Engine Mount's Bolt, just attach Protector and Color with Bolt included. If you do work one by one, there will be no displacement of the mounting holes.
Also, the installation Instruction Manual is also included for each model, and it is not a difficult task if you have a certain degree of maintenance. (Because full cowl cars may require drilling, difficulty increases. )
Well, although it is the main effect, Rear slipped down at LeftCorner and stopped after slipping about 10 m this time.
All of the damage of Motorcycle, Left Side's Handlebar bend Bar End abrasion, Shift pedal bend, EngineSide cover lower sharpness, Rear axle cover sharpness, Tandem Footpeg shaving and attachment Bolt bend, Side Stand sharpness, footpeg scratches, Side-view mirror Outer part chipping, Handlebar bending due to Tank Cover contact, scratches.
Although it seems that it is getting somewhat wrong when writing up, only the bent Handlebar and Shift Pedal are necessary for use in order to use it. This time, Handlebar, Shift Pedal, Rear axle cover and this "DAYTONA Engine protector" Exchange.
In the state of Protector after falling, the ground part with the ground of the resin Pad is broken, although cracks are contained, it is not broken, and the Damage to the car body becomes even bigger when it gets broken.
Bolt is bent at the end of the thread, the threaded part of the Engine side I was worried was also Large sturdy.
In this hand, Protector to be attached to Engine Mount part was worried because I heard that Engine Body also gives Damage by impact at the time of falling, but in fact Bolt just bent.
Color of Aluminum was also distorted due to the impact of falling.
Overall, resin Pad, Bolt not too hard, Color of Aluminum may have accepted the impact of falling over.
As a result, thanks to the installed engine protector to the insurance at the time of falling, I believe that this fall is the Smallest limit Damage.
It is best not to not topple, but I felt that it would be better to attach Protector classes for any chance.
In the Engine protector, there are things with more protection effects and things that also combine the Dress-up effect, while this Protector does not look nice and smart, but the price is also cheap and cheap and easy to install, so temporarily it's insurance I can recommend to those who think.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
Actually it was securely protected
Previously Quantity : I installed a Slider of Type that bridges the Engine Mount of 2pc, but when I strongly hit it, I heard that there is a possibility of hurting the Engine head and exchange it,
Since this alone is insufficient, I will continue to use it with BABYFACE's Engine slider.
It is easy to install because it only installs at the front Engine mount bolt part.
By the way, in XSR 900 the tightening Torque is 45 N ? m.
After installation, actually stood up but the damage was only scratched at the end of the Clutch lever except that this Slider was scraped,
It seems that it is securely protected.
In the case of falls during driving it may be different, but we are generally satisfied.
View detail
Very Simple!
Since I got stuck on standing out, I installed it immediately after delivery. It's Bolt-on. I bought it with insurance. I pray that I will never use it. View detail
Slightly more bulging but satisfied ♪
Spacer + Body and so there are quite a lot of luggage feel. But if you think that this protects Body, it is a must-not-to-be cane. However, mounting Bolt is a strength part by concluding Frame and Engine. When I receive a Damage, I pray that there is no strange Damage in Body.
In terms of design, I often match the RedBlack Body and I am satisfied. It is also cheaper than other products.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Cheap and reliable made by DAYTONA
It is Large strange to remove the attachment claw, so do not remove it as it is
I drilled a hole with Drill. If you open it according to the paper pattern, there is Screw there, so I just removed it and replaced it. It was easier than I expected.
View detail
Fits: HONDA CB400SF Spec-II, HONDA CB400SF Spec-I, HONDA CB400SF Revo, HONDA CB400SF Spec-III, HONDA CB400SB Revo, HONDA CB400SB
It is quite good product including installation
Easy to install with item design with a pretty Sense
Match on the car body and very good.
This item is recommended for everyone.
View detail
It is safe because it is a DAYTONA product.
It is still safe DAYTONA product. Easy to install, the product is also firm making, and the effect seems high as you see it. Although I have never used it not, I am happy the price that can be changed immediately even if I fall down when I think of Cost performance. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R
It looks pretty, but if there is, I wonder if it will be saved.....
Slider Body installation is almost no problem and can be easily assembled. However, 14R's Cowl removal required hang and he had to do it carefully. Large size of the product is Small, Color and Design are also plain, so we noticed that Balance is not good for the deck Body but since we do not need to make it stand out, we compromised. The concern is that there is little question as to whether Upper Cowl can defend at the time of standing when it feels less from Paris from Body.
Other than that, it is a commodity that has no dissatisfaction point with both price and accuracy.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Parts I do not want to use.
Parts I do not want to use as much as possible, but wear it with visual effects. Because the color scheme is plain, I thought about putting the enclosed sticker, but since StickerDesign is dasa, I could just wear it. View detail
Fits: KAWASAKI Varios 2, KAWASAKI Varios 2, KAWASAKI Varios 2, KAWASAKI Varios 2, KAWASAKI Varios 2, KAWASAKI Varios 2
Easy installation 5 minutes
Purchase for a moment's time. Installation is easy and Both Sides is completed in about 5 minutes. I do not know because I do not want to test the effect, but I feel secure.. I expect that I should not try it.. View detail
Fits: YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400
Spacer raw?
The attached Spacer is Quantity : 2pc. There is a set, but the making is wonderful.
One of them has a C face on both end faces and inner face, it looks beautiful and there seems to be no problem, but one has a Doughnut-like dent on the end face of the Spacer ... I think that it is unprocessed because the C face is not taken either I will.
I wonder if I can cut it by myself..
As a matter of course, the overall length of Spacer is more than 1 mm. Somehow raw is shorter but lol
Since it is installed in the Engine fixed part, I wanted accuracy. No, we can not process it unprocessed, right?.
Since I can not use it, I will use it as it is because it is awkward to return Objection, but it is better not to expect it when purchasing.
Included Parts of Others : about
There seems to be no problem on making itself beautiful.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900
For functional purposes, cheap ones
It's a part that functions basically when it's boring (It gets scratched when playing a role) I thought that it was cheap and reliable Manufacturer's thing from that point of view, I bought this. What is most important is not to take care of me... I thought that looking good was also reasonable. Recommended for those who place importance on Cost performance. View detail
Fits: HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four
Waiting for installation - - -
Items I'm looking forward to arrive late for a day - - -
I was waiting waiting a day for a while ~ ~
Takkyubin Information Movement - - -
View detail
Fits: HONDA CB400SF Spec-II, HONDA CB400SF Spec-I, HONDA CB400SF Revo, HONDA CB400SF Spec-III, HONDA CB400SB Revo, HONDA CB400SB
It is mandatory for Motorcycle with Cowl !!
I was wearing Engine Protector of another Manufacturer before, and when it fell down, it kept scratches such as Cowl to the smallest limit at the minimum, so re-purchase with this Manufacturer this time this time.
Installation can be done in about 5 minutes.
I am very satisfied..
View detail
Perhaps if it is about standing, Guard will do it
Installation is easy if there is little maintenance skills and knowledge of Motorcycle.
Apply galling prevention and apply 40N - M, but if you are concerned about the service manualetc. Please check firmly.
When checking from the side, I think that it is safe at the time of standing owing to the fact that it is overhanging quite large. Since I have not toppled yet, I can not have confirmation. For that reason, Protection is set to 3 ★.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100
ZrX1100. I koked you today..
Turn off the Handlebar full Left, starting the engine stall At the same time, we moss. The damage was Clutch lever, Mirror, Grab Bar, both at the tip slightly gully scratches. The moment they broke, Bikini cowl, Blinker, Starter coveretc. , I thought it was saddest! I thought it was saddley, but I became completely blue, but at the beginning I could not believe it at first, I checked it all out but the others were Large durable. At the same time as purchasing Motorcycle it was Large Correct answer with Slider. From now on, if you take care of Slider View detail
Fits: HONDA CB400SF Spec-II, HONDA CB400SF Spec-I, HONDA CB400SF Revo, HONDA CB400SF Spec-III, HONDA CB400SB Revo, HONDA CB400SB
It is mandatory for Motorcycle with Cowl !!
I was wearing a different Manufacturer 's Engine protector before, but I purchased it because it was torn down when I fell down. I will protect Cowl as well as Engine so I think it is necessary for Motorcycle. The price is a bit expensive but it's a difficult point - - -. View detail