Reviews
[Webike Monitor] It purchased in order to loosen the Rear-axle Nut of Ducati848. Although it remained unmoved by the Spinner Handle of 50-cm length, it can loosen now easily and is large satisfaction! It is and structure was solid as ex
[Webike Monitor] It purchased in order to loosen the Rear-axle Nut of
Ducati848.
Although it remained unmoved by the Spinner Handle of
50-cm length, it can loosen now easily and is large satisfaction!
It is and structure was solid as expensive, but since the honest structure so far did not have undue importance to itself, when there was a low-priced edition, I thought that it was good.
View detail
It thought whether the Handle could go by this one as a member of a portable tool Set, and purchased. If a trial is actually carried out and it sees, it lengthens straight, and since a joint part does not have fidelity and is thin as a Driver g
It thought whether the Handle could go by this one as a member of a portable tool Set, and purchased.
If a trial is actually carried out and it sees, it lengthens straight, and since a joint part does not have fidelity and is thin as a Driver grip when using like a Driver, it will not be kicked in a Torque.
the place which exterior attachment outside will carry out and will be more than it sufficiently but at the Torque of a grade if an L form is used -- Handle length -- as a Handle of the portable tool kit of the Motorcycle Touring that it is short and there are no Torque guide pegs, it has just become, without that which is good for the back is bad for the head.
The use has been lost although it is my selection mistake.
View detail
It has the product of the old specification, and by the present specification, an axis becomes an ellipse, Round-and-round times become that an angle Drive part does not have less, and also when a Stopper moreover takes lessons from a center position and
It has the product of the old specification, and by the present specification, an axis becomes an ellipse, Round-and-round times become that an angle Drive part does not have less, and also when a Stopper moreover takes lessons from a center position and it uses as a T Handle, condition has become good.
For this reason, the product of the old specification would return to private life, will be struck, and will follow the second life as a stick.
At a Garage, it is NO as to whether if it then combines with an Extension bar, it is easy-to-use as an omnipotent Handle which becomes T Wrench and L Wrench.
That it is that which is good for the back is bad for the head generates that the die length of a Handle is fixation after all.
Therefore, when I fix at a Garage, a Sliding handle does not use.
If convinced to the above-mentioned restrictions, a Merit will come out as a portable tool of the two-wheel Touring which wants to reduce a property.
I am made to carry when running the Tool roll settled in a cylinder 200 mm in die length in the combination of this Handle, a Socket required for the Extension bar of two merits and demerits, and a Socket rail, and a Bit holder with a long distance and a friend.
View detail
It purchased in order to use at work. -- what kind of -- or -- it is indispensable! I think That it is the proof of good goods to say that it uses and can concentrate on work. This combination is the highest although quick spinner is
It purchased in order to use at work.
-- what kind of -- or -- it is indispensable! I think
That it is the proof of good goods to say that it uses and can concentrate on work.
This combination is the highest although
quick spinner is also used simultaneously!
It was a little worrisome that the Plating of the portion of Head ? had a village.
It uses well, and since there is nothing very, now, it does not care.
View detail
It has become some bodies. Although various kinds of Ratchets are owned, to the Maintenance of a Motorcycle, BR3E thinks that it is the easiest-to-use. Anyhow, I think the highest tool.
It has become some bodies. Although various kinds of Ratchets are owned, to the Maintenance of a Motorcycle, BR3E thinks that it is the easiest-to-use. Anyhow, I think the highest tool. View detail
Looking for the spinner handle of [Webike-monitor] 12.7sq, this product was decided on. If it is called a spinner, KTC is major, but it is a prejudice of a product made into Cau Ken. [ as opposed to / if it decides / the low price of a price ] Alt
Looking for the spinner handle of [Webike-monitor] 12.7sq, this product was decided on.
If it is called a spinner, KTC is major, but it is a prejudice of a product made into Cau Ken. [ as opposed to / if it decides / the low price of a price ]
Although there was die length with 380 mm, 450 mm, and 600 mm, 450 mm which is settled in a tool box and can impose sufficient torque was chosen.
It is trenched [ which locks a point at 90 degrees ].
Since a handle does not move at the time of use, it is easy to apply power.
A grip is three kinds.
If it chooses by appearance, it will be polish, but it is a knurl grip on which it is hard to slide even if it will be stained with the resin grip which is not cold, and oil also in winter, if practicality is thought as important.
Since recommendation can be semipermanently used as compared with resin, it is a knurl grip.
Even if stained with oil, it can grasp firmly and is visible to free knurling apparently, but if actually had, the firmly feeling beyond anticipation will be felt.
Furthermore, the inside of a grip part has a hollow configuration, and only the grip part is welded and made later.
Moreover, a shaft cross section is the first time in [ by which the weight saving is carried out to a limit ] thoroughness, having elliptical to the direction which requires power and securing sufficient rigidity.
In spite of being scrupulous so far and being made, the price is about [ the same as KTC or slightly cheap ].
Considering cost performance, there is no hand of not choosing this product.
View detail
It is found useful although a hard bolt is loosened. Since torque starts easily when fastening, you have to warn against turning off the screw thread.
It is found useful although a hard bolt is loosened.
Since torque starts easily when fastening, you have to warn against turning off the screw thread.
View detail
Although it had only the ratchet until now, he heard that the ratchet is not fit for applying power, and it purchased here. Since structure is simple to be sure, it seems to be OK even if it applies power. Moreover, since the overall length is lon
Although it had only the ratchet until now, he heard that the ratchet is not fit for applying power, and it purchased here.
Since structure is simple to be sure, it seems to be OK even if it applies power.
Moreover, since the overall length is longer than the ratchet which it had from the first, torque is likely to be applied more.
It applies too much and cautions are required.
View detail
Although the tool (a home center thing is included) of various Brando till before was fixing, it was begun to arrange a tool by KTC at the time of sale. Although reliance is natural, a feel and the certainty of work go up with GUTSU. I think that
Although the tool (a home center thing is included) of various Brando till before was fixing, it was begun to arrange a tool by KTC at the time of sale.
Although reliance is natural, a feel and the certainty of work go up with GUTSU.
I think that KTC is an excellent piece as a tool in authentic domestic production safe for a sunday mechanic.
View detail
If it is the components of a motorcycle, I will regard even the components which have become tight strongly however as the ability to loosen now. Since the die length is also 45 cm, it is ponderously heavy. So, cautions are required when fastening
If it is the components of a motorcycle, I will regard even the components which have become tight strongly however as the ability to loosen now.
Since the die length is also 45 cm, it is ponderously heavy.
So, cautions are required when fastening.
If it usually fastens and is crowded, any will stop, but since torque starts here, it fastens without limit and it continues being crowded.
It seems to be better to manage with a torque wrench so that it may not twist off.
View detail
The safe product made from KTC. Carrying was considered and 30 compact cm was chosen. Unlike old KTC, the grip is also a compact head like koken well. If there is no prejudice in a high-class tool, a mistake will have a spinner handle at neith
The safe product made from KTC.
Carrying was considered and 30 compact cm was chosen.
Unlike old KTC, the grip is also a compact head like koken well.
If there is no prejudice in a high-class tool, a mistake will have a spinner handle at neither koken nor KTC.
The frequency in use of a tool of this sort is high, and since there was also a place on which high torques, such as an axle, are hung, when the strong-minded manufacturer's thing was not used and it breaks during use, it faces hardships.
View detail
It purchased in order to exchange the rear tire of DUCATI 1198. Although removed with a 55-mm socket, since bolting torque is 230 Nm, the axle nut of RIA of 1198 is rather strong. By 60-cm L handle on hand, since it remained unmoved, this product
It purchased in order to exchange the rear tire of DUCATI 1198.
Although removed with a 55-mm socket, since bolting torque is 230 Nm, the axle nut of RIA of 1198 is rather strong.
By 60-cm L handle on hand, since it remained unmoved, this product is purchased.
When trying, that which remained unmoved till then turned very simply.
truly, the difference between 100 cm and this torque clear-came out, and it carried out it.
User-friendliness is also good.
He had no complaint.
View detail
If it uses for maintenance of a motorcycle, it will be recommended perfectly! Unlike maintenance of a car, by motorcycle with many open spaces, T type handle can be used in very many cases, If there is this, there is various merit ^^ It already turns
If it uses for maintenance of a motorcycle, it will be recommended perfectly! Unlike maintenance of a car, by motorcycle with many open spaces, T type handle can be used in very many cases,
If there is this, there is various merit ^^ It already turns and already loosens, once it tastes, I will think whether to become infatuation, and I regard a feeling of torque when it shuts by hand unlike a ratchet as whether there is almost anything twisting off a bolt by an overtorque sensitively.
First, although it is a function as a T type handle, remarkable work can be provided with this one, if the extension of favorite die length is given and the socket of 3/8 which probably has most frequency in use is inserted.
Of course, although I think whether it is best for there to be a wrench for every size,
I think whether this style is the best for the direction which avoids many places in neither work space nor the relation of storage (storage is possible space-saving [ which removes extension or becomes ])! Again,
Since a handle part can slide, find it useful very much to apply torque, and,
although I think that it is worried by some people (as three eighths of spinners -- the use possibility of --)
and since the handle is made to the ellipse in the direction which requires torque, I think whether remarkable high torque can be borne, while using it with the usual T type,
Since a handle shifts while carrying out the round and round time, since it is locked with a ball, it does not become precocious! Considering the above merit, I cannot regard substituting the top of a socket for a size as a demerit so much, either.
a feeling of quality -- it is an excellent piece which makes a mistake also in the thing and in which we can recommend it truly to you by Tokoro called made in Cau Ken that there is nothing ^^
View detail
The ratchet of KTC is on weightiness, the sense of security in which the gear portion became brave, and the level different from a cheap tool. since well power enters, bolting is also possible enough -- it being high-class since there are also many sc
The ratchet of KTC is on weightiness, the sense of security in which the gear portion became brave, and the level different from a cheap tool.
since well power enters, bolting is also possible enough -- it being high-class since there are also many scenes to be used, but buying this ratchet -- it is
View detail
It purchased by Mr. Web!ke to portable [ in touring ]. There is slightly heavy touch, and since it is dramatically cheap as a ratchet handle, even if it loses at the touring point, also that it is also pocketbook and mentally, there is little damage.
It purchased by Mr. Web!ke to portable [ in touring ].
There is slightly heavy touch, and since it is dramatically cheap as a ratchet handle, even if it loses at the touring point, also that it is also pocketbook and mentally, there is little damage.
(Smile) When not using for heavy maintenance not in a touring portable way but in usual maintenance, it was thought again that it was a satisfactory product level.
However, it is as too cheap, and it said that structure was coarse, or the bond ? for grip part fixation has overflowed like a picture.
However, since there is not necessarily a problem in a function, a price is exempted and it allows.
I think that this price deserves four stars enough even if it deducts that neighborhood.
View detail
It purchased as portable [ at the time of touring ]. Although it is expensive and the manufacturer of what was also hesitating purchase, if the ratchet handle was this price, it has been purchased freely. That it is cheap somewhat can use a functi
It purchased as portable [ at the time of touring ].
Although it is expensive and the manufacturer of what was also hesitating purchase, if the ratchet handle was this price, it has been purchased freely.
That it is cheap somewhat can use a function in comfort satisfactorily, although it is unavoidable.
I think that cost performance is very high.
View detail