Reviews
My mirror extender came without bolt caps resulting in rusting of the bolt head. Ordered this product and it was delivered to me in India in a weeks time inspite of the intervening holidays. The product is just perfect and locks tight on the bolt head. N
My mirror extender came without bolt caps resulting in rusting of the bolt head. Ordered this product and it was delivered to me in India in a weeks time inspite of the intervening holidays. The product is just perfect and locks tight on the bolt head. No more ugly rust stain marks ! View detail
It is a cap to fill up mirror hole and dress up. However, in order that I may stop the tank of a brake, it is necessary to fasten firmly. Since previous one was fastened too much and the slot broke it was replaced.Although it is good with the usua
It is a cap to fill up mirror hole and dress up.
However, in order that I may stop the tank of a brake, it is necessary to fasten firmly. Since previous one was fastened too much and the slot broke it was replaced.
Although it is good with the usual bolt if it is only hardness, color can not be thrown away after all. Therefore, I bought it again. Since it is not so expensive, I change it frequently. For those who do the same usage, please keep in mind that a slot collapses if it is not fasten with a tool that covers the entire head of a screw. You could make a driver by shaving a one-yen coin.
View detail
If you look at a product in a shop, you would not miss it. But please notice that there is no display. [Product image] --Although two of the same colors are photographed like a set, only the one product is contained. If you have an idea about dressing up
If you look at a product in a shop, you would not miss it. But please notice that there is no display. [Product image] --Although two of the same colors are photographed like a set, only the one product is contained. If you have an idea about dressing up to both of handles, it is necessary to purchase the two products of the same. I have purchased them separately in 2 times.
The original mirror hole cover was made of rubber if it was genuine. Before deteriorating, I thought that would like to exchange. Moreover, it was searched for the purpose of dressing the circumference of a handle, it was such a product. The accuracy and the standard of a screw were no problem. Attachment was also easy. As soon as a product arrives, it can be fixed easily firmly by an attached small wrench. The handle can become a place with much vibration. Since it is a place to fasten firmly, such consideration is kind.
Tone variation is also unique of the company. I think that you would be able to find your favorite from these. I chose red. The color is brilliant. I guess it would be the same with other colors. After the above-mentioned warning of number of product piece, this is a recommended item.
View detail
It attached for the Dress-up up.attachment only removes and fastens simplicity and a Cover.It is the work which does not take 5 minutes. It becomes a little Accent and is good touch.
It attached for the Dress-up up.
attachment only removes and fastens simplicity and a Cover.It is the work which does not take
5 minutes.
It becomes a little Accent and is good touch.
View detail
It is used in order to fill the original Mirror hole, when an EASYRIDERS Mirror adapter is attached.There is also an object for reverse Screws peculiar to a Yamaha vehicle, and it is decided that they will be the goods here.The problem of water accumulati
It is used in order to fill the original Mirror hole, when an EASYRIDERS Mirror adapter is attached.There is also an object for reverse Screws peculiar to a Yamaha vehicle, and it is decided that they will be the goods here.The problem of water accumulating now is also solved.If one may be allowed to wish so much, if the color of a Gold is a better color condition, since it was not a not much favorite Gold color although it had chosen there, a Plating is chosen.
attachment is also easy and I have satisfied it very much.
View detail
[Webike Monitor] The Meter stay was used for fixation at the Universal mirror holder, and it was used for the Cover of the prevention from invasion of rain water and a Dust at the Mirror hall of the opposite side. It is uncanny foppish M10 v.
[Webike Monitor] The
Meter stay was used for fixation at the Universal mirror holder, and it was used for the Cover of the prevention from invasion of rain water and a Dust at the Mirror hall of the opposite side.
It is uncanny foppish M10 v.
(good point)
and a Blue alumite are beautiful.
and form are special and possessiveness has satisfaction.
and quality are good.
Somewhat sorry [ for an Anodized to get damaged ] at the time of
(bad point)
and purchase, to fasten tightly, since it was a free hezagonal wrench, although there was a special tool in the Cap bundle price with attachment.
- it can seldom be used for a heavy load.
I think that it is good to use it as a foppish Mirror hall cover to the last.
Although it was regrettable that it was not the special tool carried out comparatively [ expensive ] perfectly, it is very pleasing.
It is the
Recommendation.
View detail
There is a place to which a Mirror is attached for whether ninja250r on which I have ridden has diverted the Handle from another vehicle type. Although the lid of the cheap Rubber has covered the hole there and those who do not care would not do, si
There is a place to which a Mirror is attached for whether ninja250r on which I have ridden has diverted the Handle from another vehicle type.
Although the lid of the cheap Rubber has covered the hole there and those who do not care would not do, since I had been worried, I purchased this product.
It is not because the thing with low
evaluation is not good, but is because the price is only high.
May not you buy it, if change is left since the circumference of a Handle becomes gay only by attaching?
View detail
The Bolt part of a Mirror hides and it is good touch.
The Bolt part of a Mirror hides and it is good touch. View detail
![[Option] Mirror Hole Filling Cap Bolt](https://img.webike-cdn.net/catalogue/daypic140709/70939_1_l_TS.jpg)
[Webike Monitor] When the Brake master was exchanged, it purchased in order to fix a Tank. Since the pitch of thread is not obtained in a Home center etc., it is felt quite comparatively high-priced. Functionally, it is a free Bolt.
[Webike Monitor] When the
Brake master was exchanged, it purchased in order to fix a Tank.
Since the
pitch of thread is not obtained in a Home center etc., it is felt quite comparatively high-priced.
Functionally, it is a free Bolt.
View detail
The Bolt is covered. Since it is the Plating, it can understand also so that it may be conspicuous in the part of an old Bolt. I want you to carry out two or more Lineups of a Chrome, the Gun meta, etc. besides the Plating.
The Bolt is covered.
Since it is the
Plating, it can understand also so that it may be conspicuous in the part of an old Bolt.
I want you to carry out two or more Lineups of a Chrome, the Gun meta, etc. besides the
Plating.
View detail
When the Mirror of the CUB was exchanged, there was no Stay boots attached to a ready-made article, and since it was in the state where a Bolt is unreserved, it equipped for the Dress-up of appearance up. Since the appearance of the Bellows was good
When the Mirror of the CUB was exchanged, there was no Stay boots attached to a ready-made article, and since it was in the state where a Bolt is unreserved, it equipped for the Dress-up of appearance up.
Since the appearance of the Bellows was good although I thought that they were Bootses for Mirrors, such as an Off vehicle, primarily, it equipped.
Because the Size was slightly large, it merely became somewhat loose touch, but it is satisfactory in general.
View detail
Since the Mirror was exchanged for the Trial mirror of the Type clamped for a Handle, it equips in order to fill the screw hole. Since appearance will be bad and mud will also be got blocked, if the hole has been vacant -- I think that it i
Since the Mirror was exchanged for the Trial mirror of the Type clamped for a Handle, it equips in order to fill the
screw hole.
Since appearance will be bad and mud will also be got blocked, if the
hole has been vacant -- I think that it is perfectly decided since the circumference of
Handle is unified by the Red alumite.
Although it is a small Parts, it is slightly expensive kana.
View detail
If it puts into the hole of the Mirror which something removed, a Size will somewhat be too small and will fall out immediately.
If it puts into the hole of the Mirror which something removed, a Size will somewhat be too small and will fall out immediately. View detail
Since he wanted to unify the circumference of a Handle in red, it purchased. Cap is taken, and since a screw thread is only screwed up, it is easily exchangeable. It is the Recommendation.
Since he wanted to unify the circumference of a Handle in red, it purchased.
Cap is taken, and since a screw thread is only screwed up, it is easily exchangeable.
It is the
Recommendation.
View detail
It is the Aluminum Bolt by which the Anodized was carried out. how [ in 1 piece / Stainless bolts / a price ] in addition eight Stainless bolts can be bought and meet although it is what so much (smile) -- I also regard ? as coloring of an Anodiz
It is the Aluminum Bolt by which the Anodized was carried out.
how [ in
1 piece / Stainless bolts / a price ] in addition eight Stainless bolts can be bought and meet although it is what so much (smile) -- I also regard ?
as coloring of an Anodized becoming an Accent which may be good.
Although form like
honesty and a common Screw was imagined, it is rather than thickness also considered.
the
Anodized -- can the favorite one be recommended?
View detail
![[Option] Mirror Hole Filling Cap Bolt](https://global.webike-cdn.net/photo/article/52/1351083623252L.jpg)
[ -- the Webike Monitor ] -- I having had you fix with the same Bolt, since an Antenna stay was fixed when I have ETC attached by DS from the first, but.Although it was good to match very much with the Stay and the Bolt of the Black of the same color
[ -- the Webike Monitor ]
-- I having had you fix with the same Bolt, since an Antenna stay was fixed when I have ETC attached by DS from the first, but.Although it was good to match very much with the Stay and the Bolt of the Black of the same color, since the inside of a Cap had rusted because of water (?) collected on the Cap, this Bolt was purchased to the Replace.Since it kept about the bottom when thrusting without the Washer on the occasion of
exchange, it was tight when the attached Washer was used reluctantly.When
die length was compared, this Bolt of the cause was a little longer.At the time of
purchase, since it did not care about it, if die length is said for investigation to be insufficient, it is just like that well.Although it is seldom pleasing, since it is better than the rusty Screw, a Washer does not rust for
appearance or it watches a Washer for it.
Functionally, although it is satisfactory, since it was long, evaluation is slightly, set to *4.
View detail
It purchased in order to protect a Mirror root.When attached, appearance became good conjointly as the pure Fork boots.I think whether to be a product good comparatively [ cheap ].
It purchased in order to protect a Mirror root.When attached, appearance became good conjointly as the pure Fork boots.I think whether to be a product good comparatively [ cheap ]. View detail
sale to outside companies -- although a Rubber deteriorates and the Cover of attachment to a Mirror is torn immediately, this product has dramatically slow degradation and withstands long use. It is recommendation!
sale to outside companies -- although a Rubber deteriorates and the Cover of attachment to a Mirror is torn immediately, this product has dramatically slow degradation and withstands long use. It is recommendation! View detail
It became smart. It is a little high. It is recommended.
It became smart. It is a little high. It is recommended. View detail
It is compensable. I think that it is good.
It is compensable.
I think that it is good.
View detail