Reviews
GALE SPEED Straight Nipple for Master Cylinder
The Nipple that comes with GALE SPEED's Rear brake master and Thumb brakes is L-shaped, so it was able to alleviate the forced bending of the brake hose. View detail
Inexpensive YOSHIMURATune
Installed on a GSX-R1000R 2019
This is YOSHIMURA's reservoir Tank Cover.
It is mainly for visual customization, but it also has a functional meaning of covering the tank so that Fluid does not fly out when it oozes from the tank.
If it is simply a reservoir Tank Cover, it can be sold for as little as 100 yen.
You can also just buy a Wrist band at the extreme 100s.
On the other hand, this one costs about 1,000 yen, which is rather expensive for a reservoir tank cover.
The cost of the Yoshimura logo is very inexpensive.
Also, things are solid.
Pile fabrics, even those sold at similar prices, quickly stretch to the point of uselessness.
In this respect, this is not a pile fabric, but a sleeve rib-like fabric with a firm tightness, so it is very durable.
I have been wearing it for more than two years now, and it still retains a solid Fit feeling, although there is some fading.
As for the Size, the reservoir tank of Large size (The one used mainly for Brake) Just fit to the
CinderellaFit on a Tank of R1000OEM Nisshin Radipon.
Until we arrived at this product, the reservoir tank cover was a consumable item that had to be replaced every time it was worn out, but after using this product, it is no longer a consumable item.
In that sense, it is a good product with high cost performance.
View detail
Titanium lover
The texture and appearance are nice.
I love Titanium. So, exchange.
View detail
Works well with Color Fluid
Used on s1000rr competition vehicle.
Brake master is GALE SPEED's Elabo RateMASTER, and the Reserver tank is also from the same brand.
There is no problem with the hose diameter. I purchased a 10cm hose and adjusted it by cutting the excess portion after checking the actual distance between the MASTER and the reserver tank.
The 30cm is probably for those who are replacing both the Front and Rear Hoses, so if you are replacing only the Front brakes masterHose, the 10cm is sufficient.
As for my impression of the appearance, it gives a custom feel. As for me, my main aim was to check the fine air in the hose, but it works well with the Green Fluid. I like Parenthesis a little bit." This is the case
There is nothing in particular to note, but the hose itself is harder than you might imagine, so bending it while warming it with a dryer or something will work well.
View detail
Fits: SUZUKI sepia, SUZUKI sepia, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI Lets, SUZUKI ADDRESSV125, SUZUKI ADDRESS V100, SUZUKI ZZ
Good spare switch
About quality and texture
Good workmanship, looks very similar to the original switch, fully corresponds to the original shape and dimensions for installation on a standard seat, works great and has a characteristic click
The dimensions of the contacts for connection also correspond to the original
About the feeling of use
It is installed in a standard place under the brake machine, can be screwed both with the original one and with the screw that comes with the kit, it works correctly, the brake light turns on in a timely manner, an excellent replacement for the original part that failed
Products to buy together
You should not buy anything separately, the kit includes a mounting screw and the brake light switch itself
Difficulty of installation
Easy installation on the seat with a mounting screw on a Phillips screwdriver
Cost performance and comparison with other products
Low price, excellent compatibility and similarity with the original, should be regarded as a good substitute
About shipping and packaging
Packed in a soft bag, the switch is very soft and not damaged in transit
Any concerns, cautions, or advice when purchasing
Always look at the compatibility of this item with your scooter for 100% compatibility
-------------------------------------------------- -------- About Quality and Texture Good quality manufacturing, outwardly very similar to the original switch, fully composes the original shape and size for installation to a standard seat, works great and has a characteristic click Contact sizes for connection also correspond to the original About the Feeling of Use It is installed in a standard place for a brake machine, can be screwed with both original and screw, which is included, works correctly, the stop signal turns on in a timely manner, an excellent replacement of the original part of the failed Products to Buy Together Separately, you should not buy anything, there is a fastener in the kit and the stop-signal switch itself Difficulty of Installation Simple installation on the seat with a fastener on a cross screwdriver COST Performance and Comparison with Other Products Low price, excellent compatibility and similarity to the original, should be considered as a good substitut e ABOUT SHIPPing and PACKAGING Packed in a soft package, the switch is very soft and is not damaged during transportation Any Concerns, Countions, Or Advice When Purchacing Always look at the compatibility of this product with your scooter for 100% compatibility Powered by Google Translator
View detail
Master cylinder cap screw
The master cylinder cap was silver and the same color as the Screw, so it was changed to a Black colored Screw.
Surprisingly, Screws in the same shape and Black color are not sold in stores.
It's a small detail, but I think it has improved Parenthesis by adding a sense of crispness.
It is a recommendation because it is very inexpensive and only requires the replacement of Screws.
View detail
fashion-conscious
Ideal for One point fashion, Exhaust System and Fender Eliminator are used to match. View detail
Fashion [Color] SmokeTank
It was installed at the same time when the Gale MASTER was replaced.
[Color] The Handlebar area looks nice and tight because it is Smoke.
I like that the fixed part can be rotated to produce the Hose at any angle I want.
View detail
Shape is OEM itself
Used for plate Screw with OEMFront master cylinder cap.
I thought about replacing it with a stainless bolt, but I was worried about the electrical corrosion of the aluminum cylinder, so I decided to go with a Titaniumium bolt.
I think it is better than aluminum because it is stronger and lighter and less likely to gnaw on the screws like Stainless Steel.
4pcsQuantity:Since it is a Set, it is safe to say that there are two bottles in Spare.
View detail
regular product
A classic product, for better or worse.
It seems more durable than regular Hose.
View detail
It is very parenthesis to keep it as a decoration.
It looks very good integrated with the Rear master.
I mean, why is it sold separately?:It's like, "Leave it to Set.
I removed it because I now have Thumb brakes installed... is that what you mean?
View detail
Parenthesis OK
Parenthesis is good, it's just...
Removed for installation of Sam Brake master
View detail
This is my third purchase!
This is the third time I have purchased this product, and I buy it every time I change my motorbike.
This one completes the Tank (Hose) within easy reach...combined with Active's KaEraserd, it's pretty darn smart…!
Naturally, the Fluid capacity will decrease due to the loss of Tank, and since the air passage is gone, the Fluid movement may not follow the Pad's decrease. When I notice this, I remove the lid and adjust the air pressure. (It is slightly pressurized when the lid is pushed in, so maybe it is a matter of feeling?)
View detail
Even with all this.
I bought them together for my GALE SPEED Radial pump master, but after the order was placed, only the master was cancelled due to an undetermined delivery date, even though it was available for purchase on the product screen.
What should we do if they sell so much without MASTERBody?
View detail
Bar end mirror accompaniment.
When OEMMirror is replaced with Bar end mirror, the
The hole in the Side Mirror Base will remain.
By changing to this, the Side Mirror Base is eliminated, which is visually cleaner.
View detail
Billet Rear Master Cap from G-Craft
* About quality and texture, Beautiful billet aluminium piece with a polished surface finish that shines. * About the feeling of use, This rear brake reservoir cap from G-Craft just fits in with the styling of the Monkey 125 so well, the plastic OEM Honda part had to go. * Products to buy together, More shiny billet aluminium parts from G-Craft. There are so many in their catalogue but the chain cover is also a must have, to again remove that plastic OEM Honda part. * Difficulty of installation, The install involves removing the rear reservoir mount bolt for access to unscrew the old and screw on the new. The process was completed in 5 minutes with no difficultly. * Cost performance and comparison with other products, Price seems fair for a quality finished billet aluminium part and there is only one other option listed specifically for the Monkey 125 but the quality looks to be lacking. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, This part will be most noticeable if you are using a down style exhaust, may not be worth the purchase cost if it's being hidden by your up style exhaust. Use the product reviews to assist in making a decision on your purchase. View detail
It seems to be the same spec. that has remained unchanged for many years.
Used for a Master Cylinder with an integrated horizontal tank, which was adopted by OEM for a very old DUCATI.
It was Master Cylinder in the 70's, but I am surprised that Piston is still commonly available & continues to be used in the current Master Cylinder.
As for Seal and Piston, I am impressed that they were very well designed.
View detail
Fits: YAMAHA MAJESTY250 [Majesty]., YAMAHA grandmajesty250 [grandmajesty]., YAMAHA MAXAM [Magzam] (SG17J), YAMAHA MAJESTY250 [Majesty] (SG20J), YAMAHA MAXAM [Magzam] (SG20J), YAMAHA MAXAM [Magzam] (SG17J), YAMAHA MAJESTY250 [Majesty] (SG20J), YAMAHA MAXAM [Magzam] (SG20J)
Looks good!
[How is it used?
BALI was shaved and gutted with Double-sided Tape!
Was the one you received as per Image?
Yes, sir!
Was the installation difficult?
It was very easy!
How was your experience with it?
Once installed, it's very vibrant looking!
[Included Parts:were they on?
Other sites said it came with double-sided tape, but the one I bought didn't!
[Was there anything that disappointed you?
It's not quite right and a little off!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI Ninja250SL, KAWASAKI Z250SL, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, SUZUKI GSX-R125, SUZUKI GSX-R150, SUZUKI GSX-S125, SUZUKI GSX-S150, HONDA CBR250RRR, その他 , KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI NINJA400, KAWASAKI NINJA250R
It's very sticky.
It's very sticky. It's not easy to mount. When I put it on and drove, the brakes were repulsive. It's a pleasant repulsion. I can fine-tune the back brake now. View detail
Easy to use
The screws on the Reserve tankCap of the Master Cylinder are quite painful, so it is good to be able to replace them to keep them clean and lick-free.
It is cheaper than OEM and the quality is better.
View detail