Reviews
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
SR400Exhaust pipe replacement
The texture feels cheap compared to OEM Product, but there are no exhaust leaks.
I thought, "Can't I reuse the exhaust pipe and silencer at least once? However, it is very troublesome to re-install the exhaust pipe and silencer after the exhaust leak is discovered, so we will not be stingy and replace them with new ones every time.
View detail
Fits: HONDA CBR1000RR, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four
When replacing the Exhaust System of CB1100etc!
[How is it used?
When we replaced the Exhaust System, we had to replace the Gasket as well, otherwise it would leak and cause power down.
How was your experience with it?
It is designed for CB1300, but can be installed on CB1100 without any problem.
Of course, the quality is fine and can be used without disposal leaks.
How did it compare to other products?
The cost performance is good because it is cheaper and of higher quality than OEM Product and KITACO's same etc. products.
[Points to note]
Note that if it has not been replaced for a long period of time, it will stick to the Engine side and scratch it if not carefully removed.
To prevent waste leakage, replace the exhaust system with a new one even if it is troublesome.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-12R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-12R
Posh Exhaust Gasket
I used it on my GPZ900R.
The price was low and it worked fine.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
Used to replace CRF250L Exhaust pipe
CRF250L 2023MODEL.
SP Tadao Used to install PowerBoxPipe
It was difficult to remove the Gasket that was originally attached.
After positioning with liquid Gas when installing to prevent them from falling out.
Exhaust pipe installed.
View detail
Fits: YAMAHA TZR50, YAMAHA TZR250R, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZ50, YAMAHA TDR250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA R1-Z
In reserve for Replacement
I bought this as a spare. I will probably purchase more soon! View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
I was prepared, but ….
The Gasket could not be removed and was reused, although it was inexpensive and ready to go. View detail
Fits: KAWASAKI GPZ600R, KAWASAKI Z250FT, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI GPZ250, KAWASAKI GPZ250R, KAWASAKI GPZ400, KAWASAKI GPZ400R, KAWASAKI GPz400F/F2, KAWASAKI KLE250 Anaero, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI ZR-7/S, KAWASAKI ZX-4, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI Eliminator 250, KAWASAKI Eliminator 250LX, KAWASAKI Eliminator 250SE
be too thick
be too thick
Size is not right, so I stopped using it.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R, YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R
At the time of Chamber replacement
I don't know how long it took to replace the Chamber, so I replaced it together with the Chamber. View detail
Fits: SUZUKI MARAUDER125 (GZ125), SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman
Exhaust System Replacement
Product Name
KITACO KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
Item Number
963-2000005
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
To replace Exhaust System
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
not particularly difficult
How was your experience with it?
There does not appear to be an exhaust leak.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI ADDRESS110 CF11A, SUZUKI ADDRESS V100 CE11A, SUZUKI ADDRESS V100 CE13A, SUZUKI STREET MAGIC 110 II TR110S CF12A, SUZUKI STREET MAGIC 110 II TR110SD CF12A, SUZUKI STREET MAGIC 110 TR110S CF12A, SUZUKI STREET MAGIC 110 TR110SD CF12A
Exhaust gasket identical to the original
About quality and texture The exhaust ring-gasket is of the highest quality, made completely identical to the original, the same texture, dimensions and materials, however, a little cheaper and from a trusted consumables company About the feeling of use Excellent compatibility with the original cylinder, which once again proves the high quality, the ring is strong and at the same time soft, which allows you to achieve a perfect fit of the two flanges and the best possible seal to prevent exhaust gases from breaking past the muffler. After installing this ring, there is not a single drop of oil leaks on the exhaust flange of the cylinder, as well as any fogging Products to buy together An independent product, no additional purchases required Difficulty of installation Easy installation to replace the old O-ring, fits perfectly into place, does not fall out, but is not difficult to install, perfect fit Cost performance and comparison with other products Low cost, high quality, one of best replacements for the original on the market About shipping and packaging Packaged in a simple small package, no damage in delivery, very compact product Any concerns, cautions, or advice when purchasing Just make sure the product is fully compatible with your vehicle View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
To CT110 HUNTER CUB
Installed together with Exhaust System replacement. After the installation, there was no exhaust leakage. Don't forget to replace the Gasket when replacing the Exhaust System. View detail
Fits: HARLEY-DAVIDSON all models of vehicles
without deformation
Large is a great product because it can be used for a long time without deformation, but I think the limit is up to reuse. View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA FZS1000 FAZER
Perfect fit, quality product
cheap and high quality.Excellent functional product. There is nothing complicated about it.Would recommend! Fast shipping as always too. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Cospa is good
Scooter has to remove the exhaust pipe every time we change the rear tire, and we try to replace the gasket each time, but the price of OEM products is high. I have been searching for a more cost-effective product.
This is not a product where you will notice a difference in performance, but because it is a consumable product, it meets the objective of keeping the price low.
View detail
Fits: KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Price increase!
Until now, they have been cheaper than other Manufacturers, but they have been very helpful.
Too bad the price has gone up.
It is a consumable item, so even a cheap one would suffice.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR80, HONDA XR50 MOTARD, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250, HONDA XR250, HONDA XR100MOTARD, HONDA XR100R (for competition), HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XE75, HONDA XE50, HONDA NSF100
It's usually good
OEM is Quantity:2pc. You need to buy a Set, but this is Quantity:1 Set of 2pcs. so it is slightly less expensive. I recommend this product because there are no exhaust leaks so far. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Quantity:Seeking 1 pc!
I used this Gasket when replacing the exhaust system on my CRF-125F. However, I think it would have been better if I could have purchased it as a single item and at a lower price since I use only 1pc. of the Gasket for CRF-125F. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Used with CUB110
Used on JA10. It is a normal Exhaust Gasket.
Some people don't change it, but I think it is better to change it properly.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily
Exhaust System Replacement
Used for Exhaust System replacement. View detail
General Gasket but expensive anyway
As per the Title, the price used to be in the 5000 yen range, but the price has risen to the 6000 yen range, perhaps due to the recent depreciation of the yen. We have no choice but to buy it because there are no alternatives from other manufacturers, but we would like you to set the price more in consideration of users. View detail