Reviews
Fits: BMW R1200RS, BMW R1200RS, BMW R1200RS, BMW R1200R, BMW R1200R
First time
I tried installing it myself very easily attached.
It is difficult to have eyeglasses Wrench or Ratchet because it is installed in a place deepened in structure.
Because I do not want to try the effect, the degree of substitution for insurance (Lol)
View detail
Fits: HONDA VFR800F, HONDA VFR800F, HONDA VFR800F, HONDA VFR800F, HONDA VFR800XCROSSRUNNER 125, HONDA VFR800XCROSSRUNNER 125, HONDA VFR800XCROSSRUNNER 125
High prices are disadvantages
Purchase for protection of the upper side Radiator fins of VFR 800F. I decided to buy it because it seemed to crush fins on running dumpstones and car wash.
A good point was that it was easy to install without having to read English sentences with a helpful photograph entry manual. Having satisfied with the appearance, function and effect after installation.
The disadvantage is that the gap between Guard and Radiator is different at the top and bottom Right (Axel) The installation on the side was fixed at Nylon rock band both up and down, the price is high.
Durability is judged after follow-up observation in the future, but durability of long-term use of Nylon rock band can not be expected.
View detail
Sharp and perfectly practical
It is really sharp color for my ninja 650 brand new bike. It also protect the radiator effectively. I would recommend others to buy the product if they bought brand new bike. View detail
Fits: HONDA VFR800F, HONDA VFR800F, HONDA VFR800F, HONDA VFR800F, HONDA VFR800XCROSSRUNNER 125, HONDA VFR800XCROSSRUNNER 125, HONDA VFR800XCROSSRUNNER 125
The price is expensive
VFR800F (17) Attached to. Right (Axel side) Mounting up and down with Nylon band, Left with RadiatorMounting Bolt. Although it was as shown in the drawing, since there was no description of how to use the cushion rubber attached to contact protection with the Radiator, it was affixed after temporary attachment and then this installation was done. Material wants to see iron, so rust is anxious. However, effective for Core Fin protection. Invisible Fashion (⌒ ▽ ⌒) View detail
Fits: KAWASAKI Z125, KAWASAKI Z125pro
Price is expensive but worth it
I was kept waiting for two and a half months until arrival shipment.
Although the price is high, Fitting is the best for car model only items. I have to open a hole with Drill by myself so I think that it was even better if a hole was opened from the beginning. I think that it is good if the water splash does not exist in the Engine part with this.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Ideal for soft road surface
If Normal muffler raises STAND, Limit does not hit Clearance. Since installation is Small compared to STAND, even if you hang it down, it does not enter. Although I was worried whether to cut or not, since the material is Aluminum, I applied Dustcloth so that scratches did not get into the STAND, and when I hit it with Praghan, I could install it. It is good to think about it because there is no play. View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin
With this I can grip Knee grip
Tank is rubbing against Pants and it is white and it is blurred. Knee grip can not do it. So I decided to add Tank Pad.
Alcohol for degreasing is attached. (I do not use it) Because it is a special item Exactly to Tank of Africa Twin. Since the adhesive strength is not so strong it can be repositioned. I think that each person, but the design beside Tank is hidden and I do not want that point a little.
The surface is embossed and it is hard to slip. Because I'm Covering to the former side of Tank, I think whether it is Large durable even if I standing.
With this I will take care of Tank.
View detail
Fits: APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia)
She said that she was already floating from release paper at the time it reached home. - - - -
When we arrived, it was already floating from release paper.
It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will float after a while.
As another means, by holding down from above for a long time, I hope that the shape of Pad itself will become familiar with Tank, I will keep curing Tape from above and keep it familiar 2 months.
I thought that it would have become familiar with it and seemed to be sticking somewhat when removing the curing tape.
But. It floated on the next day.
If you leave it like this, you will scratch the painting of Tank if you get in dust, so you only have to peel off.
It is mere Large loss.
View detail
Fits: YAMAHA Tracer 700, YAMAHA Tracer 700, KTM 1190 Adventure, KTM 1090 Adventure, KTM 1050 Adventure, KTM 1050 Adventure, KTM 1290 Super Adventure, KTM 1290 Super Adventure, KTM 1290 Super Adventure, KTM 1190 Adventure, KTM 1190 Adventure, KTM 1190 Adventure, KTM 1050 Adventure, HUSQVARNA FS450, HUSQVARNA FS450, HUSQVARNA FS450
The texture is good.
Material : I think DURACON. Logo is included neatly, texture is good.
As you can see in the picture, you can get a gap from the Grip end.
Because it is a car model exclusive item, it is such a design, but it is somewhat concerned.
After that, is it a price?
Because of the functionality Parts called Slider, it is more expensive compared to other Bar End.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1
2017 MODEL needs processing
I ordered the USOEM, but because of the delay I changed it here. Overseas, '17 correspondence came out, but ABS Pipeetc. Pon attachment is impossible because the nail interferes with. Passing in Hemp palmk Left Side's nail is Cut, Right Side is bent outward and tightened with In Hemp palmk from Body frame can be installed. The bottom claws are tightened with Bolt without problems. Because I wanted to install early due to running Circuit etc. by all means, I will recommend Bolt fastening all of USOEM etc. who want to install Firmly. View detail
Fits: TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER
Material is good but can not be installed.
I bought it for TIGER 1050, but I can not stop Screw as it is because the tip of STAND does not fit. There was no notice that it could not be installed unless it was cut. View detail
Beyond my control - - -
In the past, as a hole was opened in the Radiator when traveling Circuit and it was impossible to run
Radiator installed for protection.
The shape arrived exactly. Fit it comfortably.
Installation difficulty is a little troublesome for the upper mounting (Pass Tie Wrap through a narrow place) However,
It is roughly no problem Level. It is easy if you remove the Radiator.
Also, the lower side will be tightened together with Oil cooler's Bracket but if you do not put it under Bracket
Attention is necessary because the height of Oil cooler changes slightly.
It is not good if debris smaller than the Large size of the mesh hits between the meshes,
I expect that it will be impossible to run in this way.
View detail
Fits: BMW R1200R, BMW R1200R, BMW R1200RS, BMW R1200RS, BMW R1200RS
Only the price is a problem!
First of all, since Tandem does not do it, we purchased it in order to reduce the weight of the car body.
Designetc. There is no complaint, but the price is a problem.
View detail
Fits: SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000
Long tourer requires mandatory Items
Because I like Long touring, I often encounter insect attacks in the mountains. V-Strom 1000 is relatively inconvenient when it comes to a hole in Core when a beetle collides with a relatively large Radiator and it bought it. I like it because the installation is easy and the effect is also Large. "Titanium" The color looks more like White than I thought, because I did not like the Bracket part with the same color, I put the BlackTape only on that part and wear it. Design is relatively cheap and Guard part is not bad so it is favorite. View detail
Fits: DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 959Panigale, DUCATI 959Panigale
It looks red, but the formation of the cross section is more - - -.
Used for 1299S. I wanted to unify at Tank Pad 's Manufacturer so purchase.
Carbon is quite thick and it seems to be protecting firmly.
It shines in DucatiRed.
However, as for the section of Carbon, although the surface polishing is done, it is conspicuous by thickness as it is as it is.
I wanted you to be careful so far as I will price so much.
Another person also pointed out, but since it is fixed with Seal material, I am worried about peeling off it.
0 pay closed.
View detail
Fits: Others
Stylish
Simply sticking the Rim tape changes the appearance of Motorcycle gully. I chose Red 's Tape on the body of Black, but this is also very good with Stylish. View detail
Feeling strange
Purchased because it was Sale item of Webike.
It is cheap compared to other similar products - - -.
- The surface feels like a textured pear skin. Grip is not very good.
- Thickness is thinned.
- Since there is no Instruction Manual, there is no choice but to refer to Webike's product introduction image.
- Small Pad pasted on Side cowl is peeled off and floats.
Feeling like that, it feels like a price.
Is it OK as Tank's scratch prevention?
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
Cost performance seems to work well for good
CBR 600 RR 2013 installed in REPSOL.
Color has chosen Titanium color according to Frame color.
I was worried about the installation made abroad, but I could install it without problems in particular.
Installation is fastened to upper Tie Wrap closure and lower Bracket. Sponge is also included but did not use it.
Some people are concerned about Tie Wrap closure, but when I was installing Under Cowl in the past NAKED it was Tie Wrap stop and I did not care. I think that there is no problem with rigidity because the lower part is fastened to Bracket.
The accuracy is inferior to the product of maid in Japan, but I think whether it is cheap so it is better.
Core also firmly Guards, so it was correctly installed.
View detail
Fits: APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia)
Beautiful product
I recieve this item shipping to vietnam. Shipping very soon and no problem with the item. It's useful and beauty with my CBR1000rr Repsol View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2, KAWASAKI Ninja H2, KAWASAKI Ninja H2R, KAWASAKI Ninja H2R, KAWASAKI Ninja H2R
It is not attached to H2 unless it is deformed.
【What made you decide the purchase?】
The price and shape when compared with other Manufacturer.
【How was it actually used?】
After installation, Small rocky road shoulder and gravel floated road were run at legal speed, super charger on highway and accelerated with anger, but Body 's fin, insects and dust throat stains Attached but there was no deformation. At first glance it feels like Large as compared to other Manufacturer, but now I feel Guard is available from Size objects that deform and break Body's fins.
As a result, I think the role of Core guard is sufficient.
【Mounting was difficult?】
Oh, is this really gonna be H2 ??? - - - - - At first I thought so.
Since there was no courage to remove Side Panel of specularly painted Polished as a new car, do not obey Manual, remove Panel and Tank Cover on the top of both SIDE, remove Bolt of ABSUnit and fight with narrow Space Working while doing.
A problem occurred when we finally installed the Body.
I tried to temporarily fix Core guard to Radiator, but because there is no warping condition, two top Bolts can not enter. I knew in advance in other impres, but I did not think that it would not fit here. I could finally install it by turning it in and turning it back several times.
[Is there anything I was disappointed about?]
There will. I knew but it is a place where processing is necessary to shape.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want you to be able to install it without processing.
【Have you compared items?】
Trickster, K - FACTORY, YOSHIMURA, A - TECH have a sense of quality in the design, but the price is high.
Dimotiv is expensive, but Logo's design was too strong to like it.
Based on the above, I made R & G that protect Radiator fins without much insisting on Design at a reasonable price.
[Others]
I would like to know if other vehicles can be installed without bending. Is it only H2?
Or is it Manufacturer with Atari, Ha Gap?
View detail