Reviews
Handlebar Lock is not possible.
Ignition and Seat Cylinder set.
I was able to purchase it at a reasonable price, but I was unable to lock the handlebar, which is the most important thing.
We took security measures in a different way.
View detail
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I bought it just for the color.
I won't know for sure until I ride it for a while, but I bought it just for the color, so I am not particular about its performance. View detail
Fits: HONDA Giorno, HONDA jorio, HONDA G DASH, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA SUPER TACT
It didn't fit the GYROX mid-term.
It did not fit GYROX (TD01-17~).
The diameter of the thickest part is too thick and pops out even though it is shaved down a little to put it in.
I made my own Bracket and attached it with Rubber packing to hold it down.
View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125S
Size is Exactly but
I ordered this to replace an Air cleanerFilter that was falling apart due to hydrolysis without my knowledge.
I wasn't sure how much filter oil (sold separately) to apply, so I applied the oil as I usually do on off-road motorcycles, but it seemed to be too much, and air cleaner oil spit out from the silencer for a while.
There is no way to go wrong with the installation.
View detail
I have concerns about durability.
I purchased this to install a Chinese FCR Carburetor Body35 on my FTR. It required some modification, but I was able to install it. View detail
Stainless bolt
Exhaust System fixing parts are rust-resistant Material:Changed to Stainless Steel.
This makes it rust-resistant and looks good.
View detail
Koo~ Oshii ?? (?"-??? -?) ?".
I used to get frustrated when I couldn't remove the CALI Sticker from my Number because I couldn't remove it to Beauty, but thanks to you, I'm going to be free from frustration ^^.
I think it is a good purchase because it can also serve as one point of dress-up.
…… is,
When I installed it, it was too close to the NumberLeft hiragana, so it took about a quarter of the time as it was.
The hole was enlarged horizontally in Drill and shifted to the Limit to finally achieve the current shape (see image).
I can't say for sure, because the form of Number varies from region to region, but at least in my area Number requires processing ^^;.
I also thought it would have been better if the four corners were slightly rounded.
View detail
Fits: SUZUKI Address V100, SUZUKI address V125
Probably 2000rpm UP Spring
For ADDRESSV125. Probably 2000rpmClutch meatTimingUP RedSpring.
If you weigh 85kg, at least WR weight is lighter than 16g, and under the condition that an external exhaust system is installed, it will be faster from low speed to high speed. However, the clutch will wear faster than the NORMAL because it meets at higher rpm.
View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX150, HONDA Click125, HONDA Spacy125, HONDA LEAD125, KYMCO GRAND DINK125, KYMCO GRAND DINK150, SUZUKI ADDRESSV125, SUZUKI Avenisu, SUZUKI swish, SYM RV125, SYM RV150
0.WR in 5g increments
KN Project Dasan Only Round TypeWeight roller (WR) Weight is set in 0.5g increments (And then there's the oddly shaped Dr. Pulley) 。
The same is true for all WRs, but since there is BALI, just remove the BALI with sandpaper, etc. and the rotation will be smooth.
WR weight matching is possible down to 0.1g, and the same number of grams is placed diagonally for smoother rotation loss. (without eccentricity) The WR of KN project had an error of ±0.1g, which is a normal accuracy.
Durability is normal.
The price is half that of a well-known manufacturer.
No Grease required for WR (It will be a resistance, and it will also lure in Beltkus, which will also be a resistance). Axel full open highest speed to full closed/full Brake to full open (Re-acceleration) When the stickiness is a little bit by Grease etc. at the time of (resistance) Response is delayed if there is a
View detail
Fits: HONDA PCX125, HONDA SHMODE, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA AIR LADE125, HONDA Click125I
Air filter replacement
The product was full of dust and considering the application, I will still go with OEM Parts next time. View detail
Fits: YAMAHA SUPER JOGZ, YAMAHA SUPER JOGZ
Mouth Gold.
It looks the same as OEM Product and Large, but the slit at the mouth of Valve's Gold part is too thin to put Valve and Socket together.
Hard work.
View detail
I replace it every 20,000 km.
Reached 20,000 km since the last replacement. I bought this one again after the last time because it is the lowest price among the Net purchases according to my own research. I bought this one again, but this time the area of the filter was a little smaller than the previous one, which may be due to cost reduction. The installation was smooth and the precision of the others was good. View detail
Looks GOOD!
I purchased it at the same time as the Front Blinker part.
To install, simply attach it to the Body with Double-sided Tape and affix it to the vehicle body.
Front Blinker is the same, but the Fit is not quite right; Wobble is not, but there is a gap.
It looks GOOD, but the Fit feeling was not so good.
View detail
It looks good
[How is it used?
Town ride
Was the one you received as per Image?
It is not too dark at night on Image Street.
It looks better.
Was the installation difficult?
We used double-sided tape to affix it, but since there were no instructions on where to affix it, we affixed it where it would adhere best.
Additional double-sided tape was also applied.
[Included Parts:were they on?
Double-sided tape only, no Instruction Manualetc.
[Was there anything that disappointed you?
It's not so much that I need an instruction manual, but at least explain where to put the double-sided tape.
Also, the fitting is not good. It does not fit snugly and seems to float a little.
I guess I can't help it since I'm so focused on appearance.
View detail
Fits: YAMAHA Super Jog ZR, YAMAHA BJ, YAMAHA BWS(BWS), YAMAHA APRIO, YAMAHA JOG APRIO Type 2, YAMAHA SUPER JOGZ, YAMAHA Remote controller jog, YAMAHA VINO(2Cycle), YAMAHA Remote controller jog, YAMAHA VINO(2Cycle)
I guess it's worth the price
It wasn't what I expected, but it wasn't bad either. View detail
KN Planning Fuel Hose
I am satisfied that this Size can be used by OEMs without any problems
The 6MM is a little too large for me, so this is the best size for me.
View detail
Fits: HONDA Super DIO, HONDA Super DIO SR, HONDA Super DIOZX, HONDA Super DIO, HONDA XR Baja, HONDA DIO, HONDA DIO SP, HONDA DIO SR, HONDA G-dash, HONDA DJ1-RR, HONDA standup tact, HONDA Tact S, HONDA Johno., HONDA Lead 50, HONDA Joker 50, HONDA Broad 50, HONDA Cabina 50
Is the cast metal workmanship in line with the price?
Although it claims to be for introductory use, it does not come with an Instruction Manualetc.
The object seems to be a Cylinder dug for 49.9cc.
There was also a BALI removal in Cylinder.
The cooling fins? The cooling fin has a crack, or perhaps it did not flow into the mold properly, so I think it is a reasonable product.
On the intake side, etc., where no cutting was done, a powder-like substance fell out when the casting surface was textured and rubbed. Casting sand residue?
Recommendation is to clean it up once and then use it.
View detail
HondaOEM Parts
As stated in the product description, it contains Honda OEM Parts.
It may be cheaper to buy from OEM Parts.
View detail
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Installed on MONKEY
The oil was leaking from a certain company's rear suspension that I had been using until then, and since I was scheduled to go touring in a few days, I decided to purchase this product because of its price and delivery time.
Can be installed on either MONKEY or CUB with or without the included collar. Damping force can be adjusted with the included special tool.
I think the cosmetics are good and the performance is fine.
I just wish there were several different colors.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
It's neither good nor bad
I bought it because the OEM had been a Screw Mountain fool since I bought it. Well, it's expensive. View detail