Reviews
I couldn't get it on right.
I was overconfident in myself, I thought I knew as much as Sunday mechanic, but I watched the video to prepare for the installation …Rear brake not working? I had to redo it several times. I have tried several times, but the Rear brake was not working and I gave up. I will try again after reviewing the same motorcycle riders, word of mouth, installation videos, etc. View detail
Pricey OEMParts
I bought this product because it was the company's Bore Up Kit and there was an entry in the description that said it should be replaced.
When I received the package, I found that it was just YamahaOEMParts in the KN project Package.
The things are OEMParts, no doubt, but it is cheaper to buy OEM as-is, and since OEMParts are available at Webike, we do not recommend buying this one.
View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX125ABS, YAMAHA NMAX150, YAMAHA NMAX155ABS, YAMAHA NMAX155, YAMAHA NMAX155
Cheap but not high quality impression
I purchased this product as an OEM replacement. Unfortunately, rust was floating on the surface at the time of purchase new….
The plating itself was not floating, so I polished it and used it. The Pulley boss was already worn out, so I replaced it with a Smooth gear shift.
If you are concerned about rust, OEM is better because they take measures by wrapping rust-proof paper to prevent rust from occurring.
View detail
![WINDSHIELD SCREW KIT [Silver] [KEITI]](https://img.webike-cdn.net/catalogue/14762/05150114_519262f3b2a43_TS.jpg)
For Screen Fixation
I bought this one for a trial so that I can easily clean the screen and remove it.
I wanted Black, but it was out of stock, so it is Silver.
As expected, the Screw head is Large.
It would be better if it were smaller and less conspicuous.
This is what we plan to use for other purposes.
View detail
It was somewhat distorted.
Quantity in air cleaner box:When Set, (perhaps because it is somewhat distorted). There was a little floating part. I will replace it with OEM Product next time. View detail
I'm afraid it's due to our lack of knowledge...
Upon arrival, I installed it without doing anything and it became an Engine malfunction.
I took it to a Motorcycle shop to have it checked out.
I was told that I need to include Oil in the internal Filter.
I would have liked to see an instruction manual or reminder paper included if possible!
View detail
Not always available.
Note that each GS has its own ideas about whether or not they will allow you to refuel.
If it is a store that will refuel you, you will probably have to show ID and sign a form.
It is a relief to have spare fuel at home, knowing the chaos that ensued during the earthquake.
However, storage space must be considered.
(I think you need a Seal, which is approved by the fire department, like a carry can. Some shopkeepers say
As long as it's posted, it's OK to the contrary.)
Complaint, the paint seems to be a little weak. It peels off when rubbed or bumped lightly.
Note, there will be a pressure difference, so you should put in a little less, even though it's clearly marked as 5L.
I thought it would be possible to avoid Gasoline spewing when the lid is opened, etc.
It is difficult to put Gasoline in the Fuel Tank, so you need to be creative not to spill it.
View detail
Fits: YAMAHA AEROX125, YAMAHA AEROX155, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA NVX125, YAMAHA NVX155, YAMAHA BW'S125, YAMAHA SMAX, YAMAHA CYGNUS Griffith, YAMAHA MAJESTYS, YAMAHA AEROX155, YAMAHA NMAX155
You need modify to make it work
This tools introduce said that can be work for 24mm collar. But I can't use the 24mm oem collar put inside the tools. So I use the vernier scale to to measure that. The tool entrance side diameter only 23.5-23.6mm... This tools is expensive that make me disappointed.. Because I need modify to make it work.. View detail
Fits: YAMAHA JOG Z, YAMAHA JOG EX 7PS, YAMAHA JOG EX 7PS, YAMAHA JOG APRIO Type 2, YAMAHA AXIS 50, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Vino (2-stroke), YAMAHA Super Jog Z, YAMAHA Super Jog ZR, YAMAHA jogpochet, YAMAHA Jog-A-Prio, YAMAHA Jog-A-Prio, YAMAHA Jog ZII, YAMAHA Jog (2 cycle)
Yellow color Numbering
Used on SA10J 2-stroke VINO.
I thought I would use my Gold here instead of wasting my time getting caught and paying the penalty Gold for the 2-step right turn, 30km/h limit, and driving in the right lane.
The port was not as good as shown in the photo, so I inquired before using it.
Answer.
This is normal because this product does not have finished ports. There is no problem in use.
If port processing is used, performance will be improved.
It was
There is a cheaper Bore Up Kit available, but KN Planning's Brand (quality) I believed in it and bought it, but I would rather buy a cheaper Kit or a more expensive one with better quality.
Although the product name says introductory, it is positioned as a Base component for advanced users who can process ports.
I'm worried about the port because the goal is not to make it faster, but to make it Yellow colorNumber, but I'm not sure if this is the way to get the BALI and sand? (There is a lot of sand inside the port) and incorporated.
I have driven about 500 km including break-in without any problems.
The sound of the Engine is LARGER and crisper than the OEM 50cc with an uneasy sound. Smoothness after dandruff is also gone. The fine vibration that chirps is now also produced. (I put zoil in it).
The intake and exhaust are the same as OEM, so it is not faster, or slower than 50cc, but the power band is now higher RPM and the power comes out around the rev limiter. (Unknown after Rev limiter since it is CDINORMAL) Air cleaner, intake manifold and plug have been replaced with new ones, and carburetor has been cleaned.
Intake and exhaust all OEM (Main jet also remains #70) When the fuel level is at 50cc, it is slightly thicker than the 50cc level.
The bore is up, more power is being sucked in, and the intake is being throttled, so it may be that more fuel is being sucked from the Main jet. (Although not adjusted for this Motorcycle). It would be nice to lower the
It's ok because I achieved my goal of making it Yellow color Number, but if I use this product as is, OEM 50cc runs better. I am also concerned about the durability.
To be frank, the quality is poor and the anxiety is large when it is pontoon-mounted, so I would like to return to 50cc when I think about the durability and running performance of Motorcycle, but I wonder if I will keep it as it is when I think about the license.
Even if I don't modify the ports, I would like to change the air cleaner to Duct Expansion Large, Sports Exhaust, Carburetor setting or Large, etc. to match this kit.
I'll do the drivetrain accordingly, and then I'll get into port machining...
It is indeed an introductory Kit in the sense that it is an introduction to various customization.
View detail
Fits: HONDA GYRO system (TA01), HONDA GYRO system (TA02), HONDA GYRO series (TD01), HONDA jorio, HONDA Giorno, HONDA GIORNO CREA, HONDA ZOOMER, HONDA TACT, HONDA TACT, HONDA TACT, HONDA DIO General, HONDA TODAY, HONDA Byte, HONDA LEAD 50, HONDA LEAD 50, SYM DD 50
KN Planning Weight Roller6g
The Axel Response was better, but the RPMs were higher, making it harder to drive around apartment complexes in the early morning.
I would also change to a slightly heavier Roller.
View detail
Strength is difficult.
Looks pretty, but there is a problem with the Plastic material.
If you insert it too hard, it will chip right off.
The fit with the Hexagon Bolt hole is also not quite right.
View detail
Fits: HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150
I don't get the feeling that I've changed.
It does not improve the ride.
be too hard
Harder than OEM
View detail
Fits: HONDA CRM50, HONDA NS-1, HONDA NS50F, HONDA NSR50
If you want to use this in Circuit, you should buy another company's product that Bases this.
I felt like I was losing money when I found out that the same item was sold at a lower price at anotherBrand. View detail
![[Repair / Optional Parts] Repair Reed Valve](https://global.webike-cdn.net/photo/impression/6f/6f9e776f7cf120255e42cb5909efae41L.jpg)
Fits: HONDA livudio, HONDA livudio, HONDA Livio ST
Used for about 300 km
I have used it for almost 300 km and have had no problems so far.
However, when I received other products from KN Planning that were of unbelievable quality, I lost faith in this company's products and reverted to OEM.
Originally the OEM Product did not have any problems, it was just replaced with a new one while disassembling.
View detail
Fits: HONDA clair-scoopy, HONDA Gyro UP, HONDA Gyro UP, HONDA gyro X, HONDA gyro canopy, HONDA Johno., HONDA Journo Clare, HONDA SmartDio, HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA TODAY., HONDA Livdio ZX, HONDA Gyro UP, HONDA gyro canopy, HONDA SmartDio, HONDA SmartDio, HONDA byte
Unsure how long it will last as I don't trust the quality.
I decided to replace the Belt, Pulley, and Clutch because I have no idea how the drivetrain has been taken care of on a used car with unknown mileage.
The arrows are marked, so be careful of the direction when replacing.
When the belt cannot be attached, the clutch can be widened to allow the belt to drop down and rest on the shaft on the pulley side.
Even with a reasonable one, the speed is normal because it is new.
I don't trust this Manufacturer's products now, so I will use something else the next time I replace it.
View detail
Fits: HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Livudio SR, HONDA Livdio ZX, HONDA livudio
Not recommended for AF27SUPER DIO
Ramp Plate of AF27SUPER DIO Late Thick Shaft Type was broken, so OEM Parts (
(22131-GAH-720), but had no choice but to order this as it was discontinued.
However, when comparing this product to the AF27 OEM Product, the thickness is 3mm thinner and the amount of the pulley boss protrusion is reduced, which causes the drive belt to not drop inward, resulting in a condition like 2nd gear starting.
As a first aid measure, AF27 can run for a while, but I think this is almost the same Size as AF28's 22131-GAH-780.
Although the product is compatible with the AF27SUPER DIO, it is not recommended for use with the AF27 SUPER DIO.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS)
Very limited use situation.
If they are all well loaded in early Speed, they must be pretty good.
However, if you are driving Main on the street, you will suffer from vibration and noise caused by resonance.
I need to think carefully about my usage...
View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50
Accuracy is not as good as it is cheap
I bought them because they had become cloudy and cracked over time, but the edges of the lenses were too thick to wear as they were.
I managed to get in by thinning the edges with Leutor, but I think it will start to crack with UV rays in 3 or 4 years.
View detail
Fits: YAMAHA BWS(BWS), YAMAHA BWS(BWS), YAMAHA JOG (both FI Vehicles), YAMAHA VINO, YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA Box, YAMAHA Old JOG (27V|48F|1HHH|1KX|1RN), YAMAHA Old JOG system (2EX|2TA|2TE|2JA|3CP), YAMAHA BJ, YAMAHA JOG-EX, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA GEAR, YAMAHA GEAR, YAMAHA JOG, YAMAHA JOG (2Cycle), YAMAHA JOG 80, YAMAHA JOG90
The shape of the weight roller was different from the picture in the product description.
I checked the Weight roller when it arrived and it was a different shape Weight roller than the picture in the product description.
When I inquired, the answer was that the shape varies depending on the lot.
Oh come on …
Size and weight is not a problem, but… (^_^;)
After all, this is mail order, so I would like to see pictures of the actual product being shipped.
I'm worried about the wear of Pulley side, because this Type is Weight roller without Stopper.
Because there is no Stopper, there is no Setting direction.
Is it for setting confirmation use?
If the Weight roller was the same shape as in the picture, it would have looked different…
I think I will buy NTB or PFP in the future.
View detail
I'm happy with the design, but...
I have no complaints about the shape and Design.
The Bolt for Touch is also included, and it can be installed on most of the large cars.
However, because the ATouchBolt has Black Painting, if you use normal tools to work on it, the paint on the Bolt will peel and scratch.
I think it's inevitable in terms of Material, but it would be nice to see some improvements in this area.
When working, it is better to devise a way to coat the painted area with a membrane.
After installation, fine adjustments can be made within the normal range.
The mirror part is a flat mirror, so there is no sense of discomfort in visibility, but it is reflected quite small.
Because of the emphasis on design, the small MirrorBody does not have sufficient rear visibility.
When changing from OEMMirror, be prepared to sacrifice rearward visibility.
From Forme, I'm happy with the overall Image after installation.
View detail