Reviews
Fits: DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4 SP
Design with Refreshing
I don't think I will ever hit the oil pan, but I bought it for the design as a Guard and Refreshing in case I do.
The color Black was selected for Simple.
View detail
Fits: TRIUMPH SPEED TRIPLE 1200 RS , TRIUMPH SPEED TRIPLE 1200 RR
The "Japan License Plate conformity" is subtle.
When I checked the contents after things arrived, one of the Blinker Brackets was not included. However, I contacted Support and they responded promptly.
Design is pretty good and well made.
■ About installation
The installation was done by Dealer.
I read that a Japan License Plate can be attached, but the top of the number slightly interferes with the plate and it seems to be a little distorted when attached as it is.
Also, the screw thread is too narrow to attach the plate, so it is necessary to change the thickness of the screw or to cut the threading hole slightly to expand it.
View detail
Fits: DUCATI MULTISTRADA V4, DUCATI MULTISTRADA V4 S, DUCATI MULTISTRADA V4 PIKES PEAK
My legs feel better.
I am very happy with Ducati's Brake pedal, as most of them are very apologetic. View detail
Fits: TRIUMPH SPEED TRIPLE 1200 RS , TRIUMPH SPEED TRIPLE 1200 RR
Not entirely satisfactory.
You wrote that you can't see Wiring, but that doesn't mean you can't see Wiring. (BlinkerWiring)
License Plate mounting must be changed from the existing M6 bolt to M5 to fit through the hole on the Fender Plate side.
Later, due to a matter of preference, the Reflector was changed to an ACTIVE one
View detail
PetitCustom
I considered AELLA products, but I didn't like the protruding ones, so I decided to go with this one. The operation was good without damaging the boots. View detail
Fits: DUCATI MULTISTRADA V4, DUCATI MULTISTRADA V4 S, DUCATI MONSTER 797, DUCATI MULTISTRADA 1260, DUCATI MULTISTRADA 1260 S, DUCATI MULTISTRADA 1260 PIKES PEAK, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4 R
A little Bolt is better than a lot of Bolt
It is a small part, but I think it will increase the sense of customization.
The color is Black because I prefer OEMchic.
View detail
Fits: DUCATI SCRAMBLER NIGHTSHIFT, DUCATI SCRAMBLER DS FASTHOUSE, DUCATI SCRAMBLER MACH 2.0, DUCATI SCRAMBLER CAFE RACER, DUCATI SCRAMBLER DESERT SLED, DUCATI SCRAMBLER ITALIA INDEPENDENT, DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER FLAT TRACK PRO, DUCATI SCRAMBLER STREET CLASSIC, DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER CLASSIC, DUCATI SCRAMBLER ICON, DUCATI MONSTER 797
It is very hard for an amateur to work alone.
The Instruction Manual says it is easy to install.
It is quite Large strange for one person to actually do it.
Since the Bolt that holds the Frame and Engine in place is being replaced, the
I'll use the Jacketc. on-board tool to assist the Engine so it doesn't drop.
It is necessary to
The design is good though! It was quite Large strange work for an amateur.
View detail
Fits: DUCATI SCRAMBLER SIXTY 2, DUCATI SCRAMBLER 1100 PRO, DUCATI SCRAMBLER 1100 DARK PRO, DUCATI SCRAMBLER 1100, DUCATI SCRAMBLER NIGHTSHIFT, DUCATI SCRAMBLER MACH 2.0, DUCATI SCRAMBLER CAFE RACER, DUCATI SCRAMBLER ITALIA INDEPENDENT, DUCATI SCRAMBLER FLAT TRACK PRO, DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER STREET CLASSIC, DUCATI SCRAMBLER CLASSIC, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI SCRAMBLER ICON, DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER 1100 SPORT PRO, DUCATI SCRAMBLER 1100 SPECIAL, DUCATI SCRAMBLER 1100 SPORT, DUCATI S4RS
I couldn't install it myself.
I thought it would be easy to install, but without a solid tool, it cannot be installed.
I will bring it to Shop for installation at a later date.
View detail
Fits: DUCATI MONSTER 1200, DUCATI MONSTER 1200 R, DUCATI MONSTER 1200 S, DUCATI MONSTER 821, DUCATI MONSTER 937 , DUCATI MONSTER 937 PLUS
I knew it, but…
It is for New ModelMONSTER S2, but 821 is also purchased because it is said that it fits!
However, MONSTER S2821 is the one for the O'Buffing from under Cap. I think that the Hose is extended from the bottom of the Cap and it will interfere obviously.
And I knew it was going to be Slant lol.
Well, it's not a place to take a long look at, and the quality is high, so only buy it if you can tolerate those things!
Black is plain and could have been Red…
View detail
Fits: DUCATI MONSTER 1200 R, DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER 1200 S
Tandem Footpeg Removal
I don't do Tandem, so this is a purchase for Tandem Footpeg removal.
Material:It's Stainless Steel so it's heavier than it looks but the footpeg removal works great.
View detail
Fits: DUCATI PANIGALE 899, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199
I don't feel much of an effect.
I thought the wind protection would be higher than OEM because of the High type, but it's only slightly better.
The exchange was Large strange for an amateur to remove Mirror and Wiring.
View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4
It's cool with Race ish.
The installation itself is easy but I did not mount it on the Brake Side and replaced it with OEMSwitchBox. The Master Clamp for Nisshin/With Mirror Holder:If you install the Single Body without using the Clutch Side, you will need to use the Ducati Motorcycle Switch Clamp. It is a little disappointing that there is no clamp. View detail
Fits: DUCATI STREETFIGHTER V2, DUCATI XDIAVEL S, DUCATI MULTISTRADA V2 S, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI MULTISTRADA 1200 DVT ENDURO, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1200 DVT S, DUCATI 848, DUCATI 1098, DUCATI 1198, DUCATI PANIGALE 899, DUCATI MONSTER 937 PLUS, DUCATI PANIGALE 959, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S
Installation and removal is a curing necessity.
Because it is Color Anodized Aluminum, if you don't bite the Socket with Vinyl or the like between the Axle Nut and the Socket, it will be damaged easily. View detail
Fits: DUCATI MULTISTRADA 950 S, DUCATI MULTISTRADA 1260 ENDURO, DUCATI MONSTER 1200 R, DUCATI MONSTER 1200, DUCATI MONSTER 1200 S, DUCATI MULTISTRADA V4 S, DUCATI STREETFIGHTER 1098, DUCATI MULTISTRADA V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 1200 ENDURO, DUCATI MONSTER 937, DUCATI MONSTER 937 PLUS, DUCATI MONSTER 1100 EVO, DUCATI MONSTER 696, DUCATI MONSTER 1100, DUCATI MONSTER 796, DUCATI MULTISTRADA V2 S, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI DESERTX
Dress-up parts
I replaced it from the OEM one to accommodate the Slip-on Silencer installation. Since it is not particularly necessary to replace it, it is a complete dress-up. However, because it tightens up the image of Zenta just by changing one place, I think that it is not bad Custom. View detail
It doesn't look bad, but the AELLA Clutch Assist Plate is installed and (used to make a request or demand) won't work
Because of the interference with our Slider, the
Cannot be used with the AELLA Clutch Assist Plate
In addition, because the position of the plate part of the Clutch and the base of the Slider are very close, there is some interference I will
I want to recommend AELLA's Slider to you, just in case it's dangerous
I may buy it again
View detail
Fits: DUCATI MULTISTRADA 1200 S, DUCATI MULTISTRADA 1200 PIKES PEAK, DUCATI MULTISTRADA 1200 DVT, DUCATI MULTISTRADA V2 S, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA 1260 ENDURO, DUCATI MULTISTRADA 1260 PIKES PEAK, DUCATI MULTISTRADA 1260 S, DUCATI MULTISTRADA 1260, DUCATI MULTISTRADA 1200 ENDURO
It is cool.
Small you two can be installed by yourself.
The largest Large Frame plug was not installed by myself.
I look nice and happy.
View detail