Reviews
![[Xess] Inner Silencer Concave Medium Type for Short Xess Exaust System Φ70](https://img.webike-cdn.net/catalogue/images/12600/3-t_00084m_TS.jpg)
Fits: その他
sound
For those who like the BALIBALI feeling of direct feeling, I would prefer the Large Kinahole or no Glass Wool. This product has about the same sound quality as the "BALIBALI" at the "Limit" level. It is about the same sound quality.
The volume is loud enough to be heard over the full face even at 100 km/h, without losing the sound of the wind noise.
View detail
![[Xess] (Z1 / Z2) Exhaust Gasket](https://img.webike-cdn.net/catalogue/images/2902/1-k-z1z2_TS.jpg)
Fits: KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Price increase!
Until now, they have been cheaper than other Manufacturers, but they have been very helpful.
Too bad the price has gone up.
It is a consumable item, so even a cheap one would suffice.
View detail
![[Xess] Inner Silencer 3Pcs Partition Concave Type for Xess Exaust System Φ70](https://img.webike-cdn.net/catalogue/images/12600/3-t_00090_3o_TS.jpg)
Fits: その他
Is this about right?
I purchased the Spenser type. Straight pipe indeed. I bought Baffle because it sounded like a "Baffle".
If you replaced it with a Normal muffler, you can put a Baffle on it. I think it's still a little on the large side." You might think.
However, I feel that this level is just right after replacing the exhaust system.
The sound quality is also bass heavy and the atmosphere is nice. 。 I am glad I installed it.
View detail
![[Xess] 3D Bent Merging Exhaust Spencer Type for CB750F](https://img.webike-cdn.net/catalogue/images/2902/6-h-m_00023a_TS.jpg)
Fits: HONDA CB750F
The atmosphere is better!
Exhaust system replacement has improved the atmosphere of the spenser-colored machine.
Installation was easy and hassle-free.
I also like the Matte Black Painting, but just a light scrubbing with CleanerSeat to blow off the stain has removed the paint.
Matte heat-resistant paint will make it less noticeable, but you should be a little more careful.
The sound was as bombastic as rumored, so we purchased a retrofit Baffle.
I am satisfied with the volume and sound quality after installation.
View detail
![[Xess] (GSX750 / 1100S KATANA) Inner Tube](https://img.webike-cdn.net/catalogue/images/2902/3-s-t_00001_TS.jpg)
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1000S KATANA (KATANA)
Thank you for the help
OEM Parts had been discontinued, so I was able to save the Large change with good cosmetics.
I would have been happy if there was also an Inner Tube Top cap.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
There were some disappointments.
When I adjusted the mirror, the paint or vinyl resin around the round mounting area on the reverse side was peeling off and the surface was peeling off. The paint or vinyl resin around the round mounting area on the reverse side was peeling off and the surface was peeling. (Gold genus) The "I" was exposed. Other than that, there were no problems, which is a little disappointing. View detail
![[Xess] (R1-Z) Inner Pipe](https://img.webike-cdn.net/catalogue/images/2902/3-y_t_00051_TS.jpg)
Inner Tube replacement of Front fork
Last year, I replaced the oil seal on the front fork, but the Inner Tube was damaged or oil seepage.
Also purchased Inner Tube from Zez and Oil seal and Dust Seal from Zez.
If you want to do it, exchange SlideMETAL too.
Assembled and replaced on a spare Front fork.
If it is good, I would like to overhaul the other pair of Front forks as well.
If we can run and confirm in the near future.
View detail
![[Xess] Side Cover for RZ250 / 350 (Left / Right Set) ABS Resin Uncoated Product](https://img.webike-cdn.net/catalogue/images/40195/3-Y-T_00166_TS.jpg)
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Painting difficulty
The accuracy of the object is Material:It's positioned so well that it's incomparable to FRP. It fits the body so well that there is no need to rework it. However, cracks appeared in the paint film and the finish was terrible. The paint is very difficult to apply due to the material. I think the finish of the product itself is very good. View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
Commendation because of its high quality and reasonable price as a Reproduct.
In the case of RZ350 and RZ250, OEMMirror is missing and has been resold for a high price on OaktionSite, so it is a good alternative to OEMMirror for installation. I am really glad that RiproMirror is now available from Zess. However, I would like to ask Zes to inspect the Mirror carefully before shipping, because there are two patterns, Normal Thread Screw and Opposite Thread Screw, and the Mirror may be loose depending on the item. View detail
![[Xess] YB Narrowed Handlebar](https://img.webike-cdn.net/catalogue/images/12600/3-k-t_00092_TS.jpg)
Fits: KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Nice aperture.
It's nice and well squeezed. View detail
![[Xess] (RZ350(4U0)) Engine Gasket Set](https://img.webike-cdn.net/catalogue/images/2902/3-y-t_00040a_TS.jpg)
It can be used without problems
Gasket around the Engine is all Quantity:Set
The durability of the paper-based Gasket material is unknown because it is different from OEM, but no leaks have been observed to date.
It is good for Eg full overhaul, but since it also includes a Gasket for the Thermostat section, there may be Gaskets that are not used in some cases.
However, if you need Head Gasket and other Gaskets, it is definitely a very good value.
View detail
![[Xess] Engine Gasket Set for TDR250 TZR250(1KT) R1-Z](https://img.webike-cdn.net/catalogue/images/34529/3-y-t_00155_1_TS.jpg)
Fits: YAMAHA TZR250, YAMAHA R1-Z, YAMAHA TDR250, YAMAHA R1-Z, YAMAHA TDR250
I would like to see Packing improved.
Become a Restore vendor
1KT series engines are OH'd about 20 units a year.
I don't see any problem with general use.
Cylinder base gasket quality is lower than OEM
Also, since Head Gasket is thinner than OEM
Not much, but it may affect the compression ratio.
This product is packaged in a simple laminating pack.
Recently, the vacuum has been so strong that the product body is sticking to the packaging film.
If it is severely damaged, it will tear or bend
I'd like to see that improved.
View detail
![[Xess] Stock Type Handlebar for RZ250 / 350](https://img.webike-cdn.net/catalogue/images/43739/3-y-t_00172_01_TS.jpg)
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Paint peels off easily.
Since the paint was applied as is without any surface preparation, the paint was easily removed with only minor adjustments to Lever and Switch.
I have experience with several Handlebars from Other Brand Product, but I have never seen such a weak paint job.
PositionOthers is NORMAL compliant, so there is no problem.
View detail
![[Xess] 3D Bent Merging Short Exhaust for Z400FX / 550FX](https://img.webike-cdn.net/catalogue/images/2902/6-k-m_00005_TS.jpg)
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z550
KZ550 1982 kawasaki
my bike is 1982 kawasaki KZ550. it fits good. sound DB is under 96 with DBkiller. without DBkiller? maybe more than 140db awesome black muf, but the main stand needs to be dismantled. View detail
![[Xess] 3D Bent Merging Short Exhaust for CB750F](https://img.webike-cdn.net/catalogue/images/2902/6-h-m_00002a_TS.jpg)
Fits: HONDA CB900, HONDA CB750F, HONDA CB1100F
Cheap and Parenthesis good.
I loved it so much.
I used to use RPM, but it was too low and would bottom out skinny, so I bought Zescan to try it out, which is cheap and looks good.
Large was right.
View detail
R1-ZInner Tube
My previous Inner Tube was rusty and I bought it on Shop's recommendation. it's not OEM, but it's almost the same and a good buy. Thank you very much. View detail
![[Xess] Silencer Pipe for RZ250 / 350 Yuzo Exhaust Chamber](https://img.webike-cdn.net/catalogue/images/12600/3-y-t_00098_TS.jpg)
Fits: YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
I'm just thankful for Ripro.
The sutra was a little small for my Euzo Chamber, so I could not put it in easily.
GizaGiza push marks of the vendor can be seen in the light.
I thought it would be a Level that would bother me once it was attached...
We can be thankful we have Ripro.
View detail
![[Zesu] Z2 Spec 3D Bent Assembly Tube For Zephyr 750](https://img.webike-cdn.net/catalogue/images/116265/zep750_z2_02_TS.jpg)
Fits: KAWASAKI ZEPHYR750
ZEPHYR750Z2Spec.
I'm happy with the product, with the helpful instruction manual!
I could take Silencer off and on and it was great!
It also has a nice horizontal feel.
I think I'll buy another bottle...
View detail
![[Xess] (RZ250 / 350) Mizuno Motor Original Parts Xess Reinforced Main Harness](https://img.webike-cdn.net/catalogue/images/2902/3-y-t_00029a_TS.jpg)
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
OEMHarness Comparison
Due to OEM deterioration, it will be replaced in the future.
We checked side by side with OEMHarness.
Wiring color was almost the same as OEM, with some color shade differences.
It is a Level that is not a problem.
Wiring thickness was thin in some areas.
Coupler is also OEM same etc.
The lack of Protective Tube around the Neck was disappointing.
I am thinking of it as a HarnessBase, and am working on reinforcing it and reattaching the coupler in my own way.
It is better to check terminals and couplers visually or by pulling them.
Good
Manufacturer of high quality products with high prices.
Since the Harness supply is no longer available from the
I had to purchase this product in a hurry, but overall
I'm glad I bought it
I appreciate the Large change to Replace discontinued items.
View detail
![[Xess] Original Exhaust Chamber AR50 / 80](https://img.webike-cdn.net/catalogue/images/2902/6-k-m_00024_TS.jpg)
Mizuno Motor Exhaust for Kawasaki AR80
This exhaust was very easy to mount, fit perfectly and looks great! Seems to have added some power and it definetly looks and sounds better than stock. Would purchase again! View detail