Reviews
I had no choice but to buy it…
I purchased this product in order to attach the company's Smartphone Holder (KDR-M14C). The reason is that the Mirror mount that comes with the Smartphone HolderBody has a plastic plastic "Thickness The included parts:were unbelievably thick (about 4mm/see image) and could not be installed after all. I wonder if everyone can install Mirror with this. Even if it is made thicker to prevent vibration, it is too thick.
I bought this product separately, but it shakes a lot when idling. The product of another manufacturer used in the previous vehicle was not so bad. I think this depends on the vehicle (idling vibration), so I can't say for sure. That is a little bit Minus. I am satisfied with the rest, and I think that if I adjust the angle of the bracket and the bar well, I can adjust the position of the Large body to my liking.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 400 (2014-), KAWASAKI Ninja 250, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
Interference between meters and smartphone navigation is eliminated and eye movement is reduced, making it more comfortable.
I use a Smartphone for navigation. In the past, the Holder was attached to the Handlebar by touch, but when the screen was positioned for easy viewing, it inevitably overlapped with the Meter. By attaching this product to the Mirror Hall, I was able to adjust both the Meter and the screen to a position that was easy to see, and by reducing the amount of eye movement, I think it has contributed to improved safety. The product did not rattle when driving on paved surfaces, and the bolts did not loosen, but just to be safe, we used screw locks to prevent them from loosening after the location was decided. View detail
Clamp Bar
The Clamp Bar I purchased this time is well made for the price, and I think the cost performance is high. View detail
The product itself is good, but the details are not so good.
I thought it was a good product because it can be mounted parallel to the handlebar at any distance, so it does not get in the way, and it allows for a sufficient length of bar to be effectively used.
However, the attached washer is a little small in outer diameter and not thick enough, and I am concerned about its strength when attaching the bar to the plate that also comes with the washer.
On the flip side, I could say that the Slide hole in the bar is too wide.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX
multifunctional bracket
My motorcycle is YAMAHA NMAX155. I bought this DAYTONA multifunctional handle bracket from webike. It is firmly fixed on the original rearview mirror base. It is fixed with M10 screws. The diameter of the pipe is 22mm, and it can be installed with mobile phone brackets and other accessories. Design Simple and easy to use will not affect riding safety. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. I bought this Daytona multi -function handle stand on Webike. It is fixed on the original rearview mirror seat. It is fixed with the M10 screw. Simple use will not affect cycling safety. Powered by Google Translator View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Easy to install and does not affect Handlebar
Since it is a SUPER BOLDOR, we did not want to attach various things to the Handlebar, so we chose the Type Multi Bar to be attached to the Cowl.
Installation on 2BL-NC42, but can be installed with Exactly.
When I first saw it, I was worried that the holes would not engage, but after stopping and adjusting the One Side, I was able to find a Point that just fit, and it is securely attached.
I thought that the installation might produce Chatter, but the impression is that it actually increases rigidity.
Currently I have a Smartphone Holder (with charging function) and a 3Inch DriveRecorder.
This is the full width, but there is room for a bar, so those who shoot video, etc. could attach a Camera Pole or other device here. However, it may be difficult to extend the Pole directly above the standard Screen due to the angle.
I have changed to Zero Gravity's Sports Touring Screen so I have a little more room.
By having the Smartphone just at the same position as the Mirror, there will be less eye movement, which will allow for safer driving. Also, since the Handlebar area is not heavy, the Merit is that it does not affect the light Handlebar operation that is a feature of SUPER BOLDOR.
My one complaint is that the Screw is a little hard to close, I wish it was HX4 or 5 instead of HX3.
View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA Tricity155
KIJIMA Handlebar Mount Bracket
I was a little confused whether to mount the Handlebar Mount Bracket on the Handlebar side or on the top of the Meter, but I chose the type that I could see while riding. I used it twice on a touring trip and it was very easy to use. I don't mind even if it rains a little. View detail
For Smartphone Holder installation.
CB250R Handlebar was replaced and the aperture angle became too tight.
Smartphone Holder on Handlebar
I introduced it because it turns inward quite a bit.
Clamp Bar length is 90mm (excluding Cap)
The height is from the Center of the Pipe to the Mirror mounting point.
It is about 50mm to the top edge of the bracket.
The bar length is 10mm shorter than that of HURRICANE.
I was looking for something short, so it is Exactly for me.
Bracket is turned upside down from de Fault.
It's a matter of feeling, but if you put it in this position with the Defferential Gearo
The bracket risers will be exposed to the wind.
Both top and bottom are drilled for M10.
Also, the Cap on the bar is loose, so I used Cellophane tape.
It is tight and inserted.
If you don't do this, the Level will fall down due to vibration.
Smartphone Holder was installed on Best position.
View detail
Exactly in a narrow skimmer
I wanted to attach a Smartphone Holder, but I was having trouble finding a position for it on Separate Handlebars.
The Smartphone Holder is also a perfect match with KaEdia.
View detail
Short Type looks more SMART.
Bracket height of Clamp Bar is
The lower it is, the more SMART it looks.
I am happy with Refreshing.
View detail
For cell phones and recharging.
Product Name
Multi Bar
Item Number
EI533EX4A1
Vehicles
NINJA400 (2BL-EX400G)
Number of man-hours
About 10 minutes
Required Tools
Torque wrench, hexagonal socket
Why did you choose this product?
I decided to buy this because I need it to charge my cell phone and cell phone when I ride my Motorcycle. I use Ram Mount and DAYTONA Charger, so I chose this one because it was the cheapest Multi Bar.
Was the one you received as per Image?
It was just like the Image, it came with Screws, Body and Instruction Manual.
Was the installation difficult?
It was easy to remove the two Screws and screw the Body back on again.
How was your experience with it?
The black paint is perfect with no gaps or misaligned screw holes due to the Exclusive Design. I installed Sugar Socket, USB, and Ram Mount, but there is still enough width to mount a gopro or other device.
[Included Parts:were they on?
Instruction Manual, screws, and Body were all available.
[Was there anything that disappointed you?
Nothing in particular. I would be happy if the price was a little lower.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Refreshing around the Handlebar
It was installed on the Top Bridge of a car that was converted to a bar handle.
I was going to install a Handlebar Brace on the Bar handle.
I tried several companies, but I couldn't get a Fit on the Handlebar.
I was worried about it, but I found a type of
This product does not suffer from that problem and can be positioned in various ways.
I think it is quite a useful product.
View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA Tricity155
KIJIMA Handlebar Mount Bracket
I think it is better than Handlebar because you can mount the phone on top of the Meter so it is within view and you can drive without having to be careful. View detail
Essentials for TouringRider
I installed it on my NINJA400, and I think it is a must-have when installing a Smartphone Holder, Drink Holder, or Power Supply. The bar is heavy, but not so heavy as to affect handling. View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE
Convenient!
I think many people have trouble installing the Smartphone Holder on ZX-25R, but this is a recommendation. I changed the color of both SIDE to Gold by myself. View detail
Surprisingly time consuming to install.
The car model is Exclusive Design, so it can be installed without interference.
Ideally, I would have liked to install it a little lower, but that was unavoidable.
I'm replacing the OEM Handlebar Clamp Bolt with the supplied Bolt.
It would be appreciated if the Instruction Manual could include the tightening Torque of Bolt. (OEMBolt is 25N?m)
I have read other people's (J.P.P.'s) review of the Large odd useful installation instructions.
I had a hard time tightening it as shown in the third photo because the Hexagon socket I had was too short.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
I can't wait to use it in Touring.
[How is it used?
Mainly to attach a Smartphone Holder for navigation when touring. In the future, we plan to attach a go PRO and a power supply.
Was the one you received as per Image?
Stable as per Image.
How was your experience with it?
I haven't run it yet, but it is easy to see and Firmly fixed in the middle.
Previously, it was attached directly to the handlebar, so it was difficult to adjust the angle, but now it is easy to adjust.
[Points to note]
Since it is attached with a Handlebar Fixing Screw, it is basic but important to tighten the Screw from the front and to lay down a Towel to prevent the Tank from getting Wound during the work. It is not difficult if you have the right tools.
How did it compare to other products?
Not compared to other companies, but the longer width makes it easier to use.
Incidentally, the Smartphone Holder is made by DAYTONA.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Convenient
The R25 is very useful as I can't attach anything without it. I recommend it because it is easy to install. View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
NAKED has this
This is used for NAKED cars because it is convenient.
It was not compatible with NAKED, but can be attached to NAKED with Large body.
View detail
It is indeed DAYTONA.
I use it on my Gixxer SF250. It is a vehicle model Exclusive Design, so it can be fixed firmly and is of good quality. It is of good quality and is reasonably heavy, so it is stable while installed and I can use it without any complaints so far. View detail