Reviews
Replace from attached terminal
[How is it used?
The terminal attached to GALE SPEED's Clutch holder is Straight Type
It looks ugly as it is (see photo 1), so I was wondering if there is anything better.
I was looking for it and found this!
Was the one you received as per Image?
It was exactly as pictured, nothing different.
Was the installation difficult?
Just pull it out and replace it.
Terminal to terminal connections can be made without problems with crimped pliers and a little bit of skill.
How was your experience with it?
Looks much better (see photo 2).
If you don't care, you won't care.
If you're going to mess with Motorcycle, you want the details to look nice and cool.
The terminals that come with the Parts are perfectly functional, though.
Recomendation because just a little bit of time and effort will improve the appearance of the product.
A terminal is just a terminal, but if a single terminal can change the appearance so much, it is worth replacing it.
[Included Parts:were they on?
None, just terminals and cords.
[Was there anything that disappointed you?
None in particular,
View detail
Switch
Refreshing fits in handlebar and looks good View detail
A friend of old cars?
I'm not sure about current vehicles, but this is a common two-turn Bullet Type Terminal on older vehicles.
I get the impression that there are a lot of them, especially around Tail.
View detail
Although the shape is different from those made by Ekimon, Yaoki, and others.
The Crimp section has not been modified in any way, such as being slightly folded from the beginning, so it is a little troublesome to Crimp with Electric Works Pliers, but it is good for Crimping several thick or thin Cables at once.
In addition, the sleeves for waterproof and insulation are a little thicker than those of the Title companies, but there were no particular problems when they were mixed with those made by those companies.
View detail
![KILL SWITCH [0616-0010]](https://img.webike-cdn.net/catalogue/images/81251/882C20BA-F631-419A-9F02-0C9ED443491D_TS.jpg)
Fast and easy,Works and mounts as it should no issues
Product came quickly and it mounts exactly how it should I would recommend this product to anyone who needs one. And for the price you can not beat it. I would recommend it to anyone who needs one quickly. We have had ours for a long time with no failures.Doesn't look like the picture shown but looks like the original. Better quality than original part. Super easy to install. Just unplug the old one and plug in the new one. Then screw the ground wire to the frame. It plugs into the existing harness.Would recommend! Fast shipping as always too. View detail
![KILL SWITCH [0616-0009]](https://img.webike-cdn.net/catalogue/images/81251/FF0C0E36-93E3-47EC-B1D6-B15A1332AC76_TS.jpg)
I would highly recommend the kill switch to anyone that are having problem with theirs
I would highly recommend the kill switch to anyone that are having problem with theirs I gotta say, this little beauty is a gem. Perfect plug-and-play action and boy does she stop a running motor in it's tracks, just like a kill switch should! This kill button works as good as the original one. It took 1 minute to install once the gas tank was removed. I would recommend this to anyone needing to replace their faulty kill button.Looks like quality especially for the price. great idea it if you are just looking to replace a stock switch that has failed. Thank you also for the fast shipping and great packaging. View detail
Order until received
It does take a bit of work on the website to find the correct part you need. Because, among other things, the search terms are probably very narrow and there is no selection. Afterwards, the ordering process, like the information you receive when the part is shipped, is very proven and everything works perfectly until delivery. I would order accessories for my motorcycle from WEBIKE again at any time because I am extremely satisfied. Like the product you received, it not only looks high quality on the website but also when you receive it, I have never received such a high quality brake switch. Otto ------------------------------------------------- --------- It is a bit elaborate on the web page until men found the correct part that you need. Since among other things, the search guides are supposedly very narrow and there is no choice. Then, however, the ordering process is how the information you get when the part is refined very provenly and until with delivery everything works perfectly. I would order accessories for my motorcycle again at any time because I am super satisfied. Like the product obtained, not only looks high quality on the web page, even if you have received it, a high-quality brake switches have never received. Otto Powered by Google Translator View detail
male and female terminals
Provides quality and texture with Honda Std products I was able to do what I wanted to do with the feeling of use Please contact Crimper for the products you want to buy together Easy installation It is recommended to purchase several bags with high price performance and compare them to other products as a set WeBike packaging is always good. Shipping and packaging will arrive in a week Concerns and Precautions When purchasing, you may not only purchase by looking at pictures, but also carefully read or incorrectly purchase products consisting of men like me. This product consists of a terminal for men and a terminal for women View detail
PIAA is the quintessential PIAA!
The photo shows the old type! New Type is here (New Type is the one with the round Switch)
I'm sure many of you are in a similar situation, but it's for a Switch for a Fog Lamp,
I used to use a no-name cheap one for about 2000 yen at first, but as I expected or imagined, it became unusable within a year and I bought a PIAA from a famous manufacturer!
I'm still completely satisfied with the Switch button (Pushing! Pushing! Pushing!). I'm pushing. (The feeling is pleasant.)
The overall quality of the product is excellent! The tape is also made by 3M and seems to be hard to peel off!
I know many of you are worried about cheap no-name Manufacturer products, but you should definitely choose this product, even though it is expensive!
View detail
It does not fit into the other 250 models.
I purchased this for use with Blinker relay, but it does not fit into Relay's Connector.
The shape is 250 type, but it does not stick to Male terminal because the direction of the terminal is 180° opposite to Connector.
It has no use as a Connector.
This ConnectorSingle Body can be used as a Harness, but I don't think that is what a Connector is.
View detail
Stable Manufacturer Products
I am looking for a fog Lamp switch and this is what I am looking for.
(1) Type that can be attached to Handlebar
(2) LED etc. to indicate when Fog Lamp is ON.
I didn't know that there was an Exactly product!
It is well made, and the large size is different from the Chinese-made ones on Amazon, so there is no discomfort as if it had been there from the beginning.
However, our RALLY50 has an external hand guard and brace bar installed, so it is a little tight, but we managed to install it.
View detail
For additional Wiring
I found an article that the Bullet Type Terminal for Motorcycle is slightly different in size, and it seems that it is not Exactly fitted to A0 products, so I bought one to try it out.
I do think it's harder to pull off than A0.
Why would they change the Size?
And I didn't know there was a difference even among MotorcycleManufacturers.
It's an essential component for safe Wiring processing.
View detail
By Location!
When wiring, Wiring Tube is used for the wiring itself, and Coil type Wiring Bando is used for the Bullet Type Terminal and the Jack portion. The Wiring type is easier to use than the Tube type for these joints because it is easier to remove immediately. View detail
Wiring Summary!
The Wiring Tube is a good product for refreshing the wiring, because it is hard to tell which is which when you're wiring and it can cause stress buildup. View detail
Gixxer 150 2023 It was usable.
We were not sure about the compatibility of the product with the SEA BASS Universal, but we were able to use it on the above vehicle without any problems. 103 for Micro Blinkeretc. and other products that are difficult to process for wiring. Bullet Terminal would have been even better. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, Others Universal
Flashing relay
Since the OEM of the MONKEY125 is an LED unit, the Blinker with LED bulbs would be a high flasher, so I was looking for a Relay and found a pontoon from KITACO, which saved me a large change.
It was under the Tank, so it only took a while to remove the Tank.
View detail
connector set
Quality and texture information is no different from the std product It is compatible with Honda Std products for its usability You should have a wire stripper to buy together It's easy to install Buy based on cost performance and comparative brand preference with other products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice on purchase If you connect the cable incorrectly, it is difficult to reunite There should be no failure from the beginning View detail
Kiboshi Terminal Set
Quality and Texture Information Typical Jiboshi Terminal Set Full of Male Terminal for usability Product Inquiry Crimper To Buy With, Female Terminal Easy to install Cost performance and comparison sets with other products are affordable WeBike packaging is always great. Arrives in a week for delivery and packaging I ordered it after looking at the word "set" to see if the translation was wrong when I bought it, but only the Male Terminal came and checked the site again, and the notice came up that there were 8 Male Terminals. I need to order again because it's internalism. It goes well with Honda View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Connector Replacement
The item used was old, dirty, and tight when removed, so it was replaced with a new one. It is very helpful that only the type I want is sold as a single item. View detail
For power supply branching
I used this one because I thought it was easier to use than making my own, and there were no crimping or missing parts.
Since it is a ready-made product, it is not possible to make subtle length adjustments, but it is well made.
View detail