Reviews
It is for SJ 12J, but I will add a pon to SJ 08 J
SJ12J (TMAX530) It is for SJ08J (TMAX 3 type) I will add a ponto.
However, YAMAHAOEM's 90105-10211 BoltQuantity : 2 pc is
Please prepare separately.
TMAX 500 3 type Bolt is 85 mm
90105-10211 is 68mm.
It can not be used even if cutting 85 mm (For Bolt where the thread is only 25 mm distal)
It is too long for Bolt to remove it
be careful.
Depending on Screen attach to Handlebar Holder
Please be aware that the shape of Mirror will be restricted. I am a Shark mirror. Screen is MRA's
It is RACING.. But it worked because it interfere with Mirror.
View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03
To some extent as desired
Position of NORMAL by all means, it seems that it is searching and searching! First, Instruction Manual is not understood by English version (It does not help)
The exchange itself is 1 hour if you know it. However, it took time to bleed Brake, so it was about 2 hours or so in the whole process.
Position can not lower too much considering Clearance with Tank.
However, it was a correct answer by exchanging it within a satisfactory range.
View detail
Changes from Handlebar Up kit
I attempted to improve Position with Handlebar Up Kit, but I bought it because I did not feel much effect. NORMAL ratio 9 cm Up, 2. 5 cm Back was effect Large. Handlebar Switch It was also good to have holes processed. View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II
I am satisfied..
Look at the actual item of Handlebar with Napps
I actually felt higher than I did when I felt high
But I was just right
What we need separately with zrx 400
It is Screw about 2 cm of Brake fluid and M6.
View detail
Fits: HONDA Super Cub 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA LITTLE CUB
Meter's lighting
I purchased it by attaching it to CUB CUSTOM. I am generally satisfied, but I have Minus evaluation about 2 points. First, when attaching to CUB CUSTOM, since the attached Handlebar is for CUB other than Custom, it can not be used because Silencer Switch part is thinner. Another point is that Meter's lights are dark and illuminate only about half, I can not forgive with cheeps, so I got Posh's additional items as it is the first place to go on a ride.
Results Expense increased unexpectedly.
View detail
After all the quality of HURRICANE is high
Someday I was planning to install HURRICANE 's Classic Handlebar.
By chance, since gathered gold entered, purchase Handlebar Set.
As long as I was longing for this shape, I arrived and grasped it better than I imagined!
Today I completed the exchange from the OEM and confirmed the feeling across ESTRELLA.
People who like this style absolutely have no regrets.
I want to finish Restore soon and run to early spring.
- - - If you let me tell you, I will draw "Throttle Cable" - It was better if there was an indication of "return".
Even though the Length is the same, there is a subtle difference in the angle of the Carburetor installation side.
View detail
THESE HANDLE BARS RAISE THE HANDS JUST A BIT HIGHER AND BACK. MORE COMFORTABLE THAN THE STOCK BARS. NO NEED TO CHANGE CABLES OR HOSES WITH THESE BARS.
THESE HANDLE BARS RAISE THE HANDS JUST A BIT HIGHER AND BACK. MORE COMFORTABLE THAN THE STOCK BARS. NO NEED TO CHANGE CABLES OR HOSES WITH THESE BARS. View detail
It is an exchange from the OEM.
Today I tried to Trucker handle recently as Cafe-style is in fashion. Lol
As you can expect, it is Large Changing Satisfaction for yourself with a comfortable driving attitude!
Material : Brake hose of Stainless Steel also got Dress-up and I like it. There is vibration while slight Idling, but it does not matter if you start running. Custom As an amateur, I bought this set and went to Shop as it was and got it attached. Lol
Black is Mud black. There is no Luster.
View detail
There is a difficulty in installation. However, if it is attached, it is very easy
I wanted to make fine adjustments such as height from NORMAL, but when I think that what kind of position it will be, even if I change it from Bar handle of NORMAL to Bar handle outside the company, when I think that it can not imagine so much meet.
Originally, I had longing for Separate handle, I heard that change from Bar handle to Separate handle is not practical such as hitting Tank, but I can adjust the height and aperture, so I'm durable Large.
Speaking of installation, easy ...
Since there are not many parts, there is no problem ... It is a husband.
However, due to the problem of processing accuracy of the parts, or putting the A part in the hole of the B part, because the hole of the B part does not enter the Small size and the hole for attaching the Switch is opened, There is no point because it is too different and it is necessary to open it back, it was not a simple story.
However, once attached, you can adjust with your favorite Position, and you can adjust it with Separate handleStyle of Up feeling, even a slightly offensive Separate handleStyle, so it's amazing.
However, due to the structure, since the mounting of the Handlebar part is high, the height of the ordinary Separate handle is different from Image.
View detail
The appearance after installation is wonderful
I installed it myself, but the handling of the Wire was Large strange
We also processed some parts.
At the same time Large Screen - Posh's Early barrel grip was attached, so it looks good in Large change.
But since Grip comes before the OEM, the posture rises
I thought the sense of Sports at Winding faded.
It might have been good to try it from Posh's Touring bar first.
View detail
Fits: KAWASAKI NINJA2 Helmet50R ABS
Improved ☆
Although I bought Ninja 250 and put HURRICANE's Up HandleKit in the early stage, there was not Handlebar Brace fitted according to the shape of Handlebar because it would not be up to take advantage of OEM's Hose class.
The one improved this time is Position of Up & Back to complement its Minus, it becomes an even more comfortable Riding Position and it is satisfying Large. The original Bracket can be used as it is, this time with purchase of additional Type of Handlebar, Clutch Cable, Brake hose added without problem.
Mirror looks extremely bad as one Large problem. Naturally, naturally, because Ninja, Up Handle is not good, since it moves away from Mirror, the reflection also changes a lot. I put PENSUKE 's Offset, but still I can hardly see the back of it.
Still I like this Up HandleStyle very much ☆ We have reached five ratings!
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Installed in 2000 model GSX 1300 R HAYABUSA
I was worried about the length of Brake hose, but I added Handlebar to Quantity : Pair (for Left and Right) There is plenty of room for cutting, and it is satisfactory without leakage.
Brake, Clutch 's MASTER does not touch the screen, but as expected, HURRICANE
The price, installation, and a small amount of impression were pretty unexpected at Neck, but I was satisfied with Large. A person who feels that Position is hard at Long touring is a Recommendation
PS. My waist has become much easier
View detail
R25 to Pipe Handlebar!
R25 is now Sports and it is,
What is Handlebar, what is Separate handle - - -
If you think that it is good with Bar handle to put it on Top Bridge
I bought it because it looked like this item White.
I do not want to fail installation, so ask the shop to install,
The labor charge is less than 30,000 yen - Installation time is 6 hours (sweat)
Because it is higher than the product, let's do it by yourself!
As an impression attached,
Since the Handlebar comes up, it will be like Tourer
I thought that,
Because the angle of Handlebar is quite large, it did not change so much with OEM.
(Mirror and Screen are considered as such)
As the height rises considerably, it is Recommendation for those with a high height sitting like yourself.
It is about the level measured by hand, but it seems to be handled mirroring.
Recommendation can also be given to people who disgust with OEMMirror which is hard to see quite - - - maybe
View detail
Fits: YAMAHA GRAND MAJESTY250, YAMAHA GRAND MAJESTY400, YAMAHA MAXAM, YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG20J), YAMAHA MAJESTY250 SV
I like it naturally, nicely.
I was considering various Manufacturers and Muji Manufacturer things, but it was a correct answer by buying a set item.
I am familiar with the car body, I feel relieved with less sense of Custom.
One thing I was dissatisfied with was Wiringetc. Screw of a hole lid for letting through is using Screw which is easy to feel.
I think that it seems to be fine, but it is worrisome and it can not be helped.
I wanted you to be Stainless Steel of Hokkako Screw instead of just PlusScrew.
I am planning to place an order at a screw shop at a later date.
View detail
I want to make Position easier
Originally the UpHandlebar Spacer was attached, but still a bit Position was a little so I decided to replace it with a Bar handle type I chose Type to exchange from Top Bridge.
Other Manufacturer's were also watching variously, but HURRICANE's decided on this because it seems to be able to install without extension such as Cable, Wire.
Installation was troublesome only for removal of Key cylinder, but somehow I was able to do it by myself.
Throttle Cable handling (Hole of Frame) I was able to afford to change.
Position got easier with the feeling that Handlebar came back behind.
View detail
great wheel for little money. The quality of welds is excellent. Wheel exactly follows the curve of the original. Delivery is carried out with a base, which is very nice. There are no holes for wiring, but may be carried out independently. Bought and am v
great wheel for little money. The quality of welds is excellent. Wheel exactly follows the curve of the original. Delivery is carried out with a base, which is very nice. There are no holes for wiring, but may be carried out independently. Bought and am very pleased, thank you. How do Russian people grieve with the Japanese people in the day of trouble Fokusima. View detail
1999 VFR800 - 5th Gen. Decided to try this kit as its substantially less than the Spiegler/LSl kit. I also don't care for the superbike bars in the LSL kit and do not like the look of convertibars. I have arthritis and am trying to make the Vfr a little
1999 VFR800 - 5th Gen. Decided to try this kit as its substantially less than the Spiegler/LSl kit. I also don't care for the superbike bars in the LSL kit and do not like the look of convertibars. I have arthritis and am trying to make the Vfr a little more comfy for long trips. The parts are top notch fabricated/finished, well packaged and thought went into design. Bar position basically mirrors the factory clip-ons with a bit of pullback/height added. Clutch/brake lines and starter cable are plenty long enough. Throttle cables are just long enough in standard routing if you run them behind the brake line. View detail
Good, high quality stock like handle bars that include all you need. Only thing is that they do not have the holes for the wires if you want them. Price is good and fits with no problem
Good, high quality stock like handle bars that include all you need. Only thing is that they do not have the holes for the wires if you want them. Price is good and fits with no problem View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX)
These handlebars are excellently engineered great quality and finish very easy to fit and look great just enough adjustment to improve the riding comfort for me they are expensive but a lot of work has gone into designing and producing these Handlebars
These handlebars are excellently engineered great quality and finish very easy to fit and look great just enough adjustment to improve the riding comfort for me they are expensive but a lot of work has gone into designing and producing these Handlebars View detail
I had a shop person install the product on my motorcycle.This is a set of a top bridge and handlebars.10mm spacer kit and mounting bolts for each are included. You can choose -45mm/-55mm, compared size to OEM parts.I started with a 10mm sp
I had a shop person install the product on my motorcycle.
This is a set of a top bridge and handlebars.
10mm spacer kit and mounting bolts for each are included. You can choose -45mm/-55mm, compared size to OEM parts.
I started with a 10mm spacer kit and -45mm (compared size to OEM).
After an about 50km ride, I has felt rather comfortable with the slightly forward-bent posture even on a town ride.
Even in a moderately tight corner, it is easy to control the vehicle without taking an unnatural riding posture.
OEM handle is mounted on a quite up position and requires an upright posture; I feel difficulty to make a sharp turn with it. This handle is very good.
Keeping a forward-bent posture isn't stressful, rather very good, on the highway.
The handle lock works correctly and the turning angle of the handle remains the same. (no reduction occurred)
The list price of more than 70000 Yen is very expensive, but you can save some money by buying it on the internet.(I purchased it at the list price through a retailer, though.)
View detail