Reviews
Fits: DUCATI MONSTER S4R, DUCATI MONSTER S2821, DUCATI MONSTER S2797, DUCATI MONSTER S21200, DUCATI MULTISTRADA 1000DS950, DUCATI MULTISTRADA 1000DS1260, DUCATI MULTISTRADA 1000DS1200 DVT, DUCATI MULTISTRADA 1000DS1200, DUCATI HYPERMOTARD950, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821, DUCATI STREETFIGHTER1098, DUCATI SUPER BIKE848, DUCATI SUPER BIKE1198, DUCATI SUPER BIKE1098, DUCATI SuperSport939
Easy installation!
It is perfect for the Front undercarriage support.
Installation is also very easy!
View detail
Fits: DUCATI SUPER SPORTS750950, DUCATI SUPER SPORTS750939
Position perfect!
Since the installation is Exclusive Design, it fits perfectly and is very easy to see the mobile navigation system. View detail
Fits: DUCATI StreetFighter V4S, DUCATI StreetFighter V4
The difference from NORMAL Position is a cloud of difference. Easier to produce Neutral.
Easy gear changing and rear brake,
Large difference from NORMAL.
View detail
Fits: DUCATI Panigale V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
certainly
It is true that it was very good because it made it easier to STAND, but if I banked too much on the winding, it was scraped and bent. I think it is because of up-down because of the mountain road. View detail
Fits: DUCATI 748, DUCATI 1098, DUCATI 1198, DUCATI STREETFIGHTER, DUCATI SS900, DUCATI MH900e, DUCATI MONSTER900, DUCATI 900SS, DUCATI SS900, DUCATI 748S
900SS Clutch
The product was nicely Packaged.
I was a beginner who opened and installed the clutch cover for the first time.
It was also helpful that the information on tightening Torque was also on the web.
View detail
Aella shift rod holder
Since my Z900RS cafe didn't really seem to have problems shifting as long as I paid attention to technique, I debated with myself about buying this part. Some users have reported being very satisfied with improvement found using this. So I thought why not try this out. The design seemed very good being able to center the shaft after the bracket for the holder was mounted, keeping out of line tension to a minimum. I am happy to report that the improvement in shifter feel was quite a welcom surprise, it exceeded my expectations for function and I would not want to remove the part after riding with it for a hundred miles. My first to second and fifth to sixth gear changes are considerably smoother than before. I don't really have to concentrate on shift and clutch technique as much to get good clean gear changes! View detail
Fits: DUCATI 748, DUCATI 1098, DUCATI 1198, DUCATI STREETFIGHTER, DUCATI SS900, DUCATI MH900e, DUCATI MONSTER900, DUCATI 900SS, DUCATI SS900, DUCATI 748S
If you're having trouble with Clutch being heavy, you're in luck!
I was fed up with the Clutch on the 900SS because it was so heavy.
The standard clutch release replacement did not have the desired effect. "Well, Spring is heavy because it's stiff, so shouldn't we replace Spring first?" I decided to purchase this product and it has become lighter on a Level that I can feel. It is so much easier to cut and hold than before. I think it will be easy even if I ride a long distance.
However, it is still a bit heavier there than on a typical Motorcycle these days.
The process is simple. Anyone with a Torque wrench can do it.
I've felt the effects and Spring is Polished and I feel good.
View detail
It broke my Engine Case
The slider quality is good. But I feel this slider design is flawed. It broke my engine case. I'm switching to EvoTech Performance Sliders. View detail
A product that makes town riding a pleasant experience.
As a vehicle, the Shift feel is not bad to begin with, but I bought it in the hopes of making a change.
The installation manual is easy to understand, and as long as you know the lock pin of the BallJOYON, you can easily install it.
At first, I felt that the rigidity was not as good as the Steel OEM product, but the Shift feel is clearly lighter and the input operations are smaller. The Shift feel is clearly lighter, so input operations are smaller, and I concluded that it is sufficient.
View detail
Better than I expected.
I use it on the circuit, but the embrace from Straight has become very mild, and I don't have to worry about breaking anymore. I am not sure if I can feel it on the street since I haven't driven it yet. View detail
Fits: DUCATI SCRAMBLER 800, DUCATI MONSTER 797, DUCATI MONSTER 821, DUCATI MULTISTRADA 950, DUCATI SuperSport, DUCATI MONSTER Plus, DUCATI SCRAMBLER Sixty2, DUCATI HYPERMOTARD939
Installation was easy.
The installation process was easy, but the Lever movement interfered with the O2Sensor and I had to have a slight adjustment made by my dealer. View detail
Fits: Others , DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4
Vain self-satisfaction.
I know that I can't feel the effect of AELLA's footpeg kit, handlebar, leveret, etc., but I replaced the front and rear caliper bolts with AELLA's Titaniumium bolt. Small boltQuantity:2pcs for the price! The beauty is that people who know what they are doing will notice it. It is true that the weight will be reduced, but the difference is that the weight of the car body will not be a mountain of dust. However, the mechanical beauty of the smallest parts is still AELLA! AELLA is a better match for MonocoqueFrame docas! That's my personal opinion.
TitaniumParts lover and AELLA devotee's Petit luxury item.
View detail
Fits: DUCATI StreetFighterV4, DUCATI SUPER BIKE 9916, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER, DUCATI ST4, DUCATI ST3, DUCATI ST2, DUCATI SS800, DUCATI SS1000, DUCATI Sport, DUCATI PAUL SMART1000LE, DUCATI PANIGALE V4, DUCATI PanigaleV2, DUCATI Multistrada 1260, DUCATI Multistrada 1200, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI MULTISTRADA 1000, DUCATI Multistrada 1100/S, DUCATI MONSTER796
Self-satisfaction of AELLA believers
After replacing 4 Front, I still thought that the front alone was one hand. (Just him?) The replacement arm is shorter than the Front arm, and there are fewer of them, so the effect of weight reduction is even less noticeable than the Front arm. It is easier to see than other cantilevered swing arms. (Easy to Appeal) However, I wonder if the Manufacturer would be offended if I said that it is just AELLAMania's self-satisfied Parts.
It is not a part that is about cosmetics, but it is a good medicine for the custom disease of Titanium lovers if it can satisfy their temporary greed and petit self-satisfaction for less than 10,000 yen.
View detail
Snap and Fee Ring
I bought it for the snap touch, and both OEM footpeg and Rear Sets have been changed. There is no maintenance required, so it is easy. I think the cost-effectiveness is good. I recommend it. View detail
Adhesion is strong.
I put the largest Sticker on both SIDE of the Upper Cowl, but the one on the Left Side failed.
Cowl's R was where the compound was located. Oh, it's the Gap. I pulled it up and it tore.
I peeled it off using my fingernail and Ethanol, but the adhesive was so strong I thought my fingernail would come off.
The Right Side was applied beautifully, so it is already on Quantity.:I am pondering whether to buy 1 Set.
View detail
Frame Slider
Bolt to Quantity:Pair (for Left and Right) Installation was as simple as tightening four pieces together.
We will remove the Engine's HangerBolt and so on, so as long as Torque management can be done, there is no problem.
Slider itself is nicely finished.
I haven't fallen down, so I'm not sure how effective it is.
View detail
Fits: DUCATI PANIGALE V4 S, DUCATI PanigaleV2, DUCATI SCRAMBLER 1100, DUCATI Multistrada 1260, DUCATI PANIGALE V4, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER S
I am self-satisfied.What is the effect experience with Single Body?
After finishing the improvement of riding position and appearance customization, we started to improve the driving performance and feeling by introducing functional parts. Replacement with AELLA Axle Shaft.
At the same time, Shaft collar and this nut were also replaced. Material at a reasonable price.:Even with Titanium, there is no way to experience the effect of these parts alone. It is a world of self-satisfaction.
It is a good product to temporarily satisfy the uncontrollable greed and self-satisfaction of AELLA believers. (Laughs)
View detail
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Bolt Exchange and Quantity, a behind-the-scenes help:Set
Bolt and Quantity:According to AELLA's explanation, the Bolt's Center is exactly where it should be. I understand it in theory, but I am not sure about it. I honestly feel that Bolt alone is a bit of a letdown, and although it's expensive, it's a good thing that it's Quantity.:Replaced by a set, including Bolt, but with weight saving effect and positive position Quantity:I can't feel the effect of Set at my Level (laugh).
Well, that's fine.
Even though weight reduction under the Spring is said to be highly effective, the average rider will not be able to experience it unless they replace the carbon wheel or mag-forged wheel, right?
It may be a good PARTS to satisfy self-satisfaction and uncontrollable greed for a small amount of money.
View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI SCRAMBLER 1100, DUCATI PanigaleV2, DUCATI PANIGALE V4 S, DUCATI 959Panigale, DUCATI PANIGALE V4, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale
Difficult to experience the effect with Single Body. It is a sense of self-satisfaction to stick to the invisible parts.
When I replaced Axle Shaft with AELLA one, I replaced it with AELLA one at the same time. If someone who knows about it looks closely, he/she may notice the difference in color.
I think that the functional parts are not so expensive, but it is a hassle. (Labor Charge) What is the best way to replace this with Single Body? I wonder.
It felt good to hold in my hand before mounting.
If you're an AELLA believer, believe in its effectiveness and replace it!
View detail
Fits: DUCATI 1299Panigale, DUCATI PANIGALE V4, DUCATI DIAVEL, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 1199Panigale, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
You can certainly feel it!
After finishing improving the riding position and customizing the appearance of the car, we started to introduce functional parts. First, we started with the lightening and rotating parts under the spring, which were said to be highly effective, and then we chose the Axle Shaft, which we were hooked on AELLA for the footpeg and handlebar, and replaced the color and nut with this product without hesitation.
I also changed the BrakeCaliperBolt and Washer to Titanium, so there may be a synergistic effect, but I certainly feel that the rigidity of the front area has increased, while the lightness of the front area has increased.
Well, it feels that way right after the exchange, but once you get used to it, it becomes the norm, and it is often more difficult to ride than in NORMAL as you seek one change after another.
We reaffirmed that we would like to remember that we are replacing parts in order to improve our Riding technique while taking our time to enjoy the effects.
It is difficult to judge the cost performance because it depends on each person, but if you want to enjoy the SS series, I think this is a recommended part.
View detail