Reviews
Fits: YAMAHA BWS100(BWS100), YAMAHA GRANDAXIS(GRAND AXIS), YAMAHA BWS X125(BWSX125), YAMAHA BWS125(BWS125)
Good.
The position of Brake can also be finely adjusted, the texture is still firmly made with Fashion.
Also carefully translating Instruction Manual (written in here please fill in, it is easy to understand when adding.
Although the price is a little expensive, I think that there is no loss by purchasing.
View detail
Fits: YAMAHA MT-09 Tracer, YAMAHA MT-09, YAMAHA XSR900, YAMAHA XSR900
Chain adjustment is extremely easy!
In case of attaching to MT 09 of Second Type Model, we have to purchase Fender Eliminator Kit and Axle Shaft of First Model Type, so it will be a significant expenditure, but it was released from Chain adjustment which was very difficult to do.
One point to worry is that Adjuster is thick and Shaft and Nut become Tsurishi and it will be tough..
View detail
Is it such a thing?
I replaced it because the Grip made by DMV got hit.. I thought about purchasing a DMV but it was unfortunate, I waited for delivery and it was more than one month so I bought a baby like Design. Installation etc etc. ,No problem. It is a so-called ordinary Grip. There is no problem with operation feeling. The only problem is price. It is sold at less than half price with similar design like Amazon. If Brand is not concerned, it is not necessary to purchase this. Because it is a Chinese product anyway. View detail
Fits: YAMAHA BWS100(BWS100), YAMAHA GRANDAXIS(GRAND AXIS), YAMAHA BWS X125(BWSX125), YAMAHA BWS125(BWS125)
Good.
The position of Brake can also be finely adjusted, Brake's Touch has also improved.
Next time I will try to wear this Brake to CYGNUS.
View detail
Fits: YAMAHA BWS125 (BWS125), YAMAHA BWS100 (Bewith 100), YAMAHA GRANDAXIS, YAMAHA BWS X125 (BWS X125), YAMAHA BWS100 (Bewith 100), YAMAHA GRANDAXIS, YAMAHA BWS X125 (BWS X125)
Brake's Touch
It got lighter and the position of Brake lever was 3. Since it can be adjusted between 5 mm, you can bring the Brake lever to the desired position.
Also color is colorful and there are lots of luxurious colors, so it is a personal recommendation.
View detail
Fits: YAMAHA MT-09 Tracer, YAMAHA MT-09, YAMAHA XSR900, YAMAHA XSR900
Protect? Accent
As was the case with the other reviewers, you can install it with a single Wrench. I feel that making is also solid.. It was good to be able to choose the color. View detail
It's too expensive for Parts for just looking
In my case I am changing to Throttle Cable because I'm swapping with Swallow handle. Since the Cable passes through the MeterReverse side exactly, it interferes, so I wondered whether to change the handling or use it as it was after all. If you do not change Cable's routing, there is no interference, but Throttle's return will be worse and there will be times when you can ride as it is. I will worry about it for a while.
View detail
Fits: YAMAHA BWS (Bewith), YAMAHA Cygnus X, YAMAHA BWS125 (Bewith)
Luxurious Combination Nifrek
Because it is a special item, Size, Fit feeling is perfect fitting precision is high, Anodized Finishing a classy item
Size of Hook is also thick and strength is firm.
View detail
Sitting sensation Imaichi
I changed from S1000XR to S1000R. I used Dimotiv when I was in front..
I could stop by just Screw and I was worried about falling. Because this item will attach Cover
I thought it looks relieved and purchased. Black Cover is slightly floating and the feeling of sitting is not good.
Reliability when stopping to loose ground, neither item is no problem.
I think that it is a problem of the BMW side.
View detail
Almost satisfied
Although Stand Hook comes out from various Manufacturers, the thing which is easy to get at the shop was scraped from the solid wood of Large Resistance Aluminum and it went on to Color Anodized Aluminum, so I was looking for somewhat elaborate design.
As a precaution, the Reverse side is hard to understand if it is a picture, but there is a cylindrical projection on the bottom side of the HookBody.
The body with the Hook attachment part on the lower side of the Swingarm is designed to adjust the step difference with Swingarm in that part, but in the case of the body with the Screw hole directly in Swingarm it will be quite unnatural shape.
Because I was here, I disconnected it with HandyGrinder and used it.
View detail
Fits: YAMAHA MT-09 Tracer, YAMAHA MT-09, YAMAHA XSR900, YAMAHA XSR900
Cool!
Design is very cool.
Installation was also easy with a single Hexagonal Wrench.
Right part of the Radiator is somewhat gritty, but it is not a concern.
View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA MT03, YAMAHA YZF-R3
Street Image (^^)
I wanted to unify the footpeg with the same color, so I attached it (^_^)
Was it easier just to remove NORMAL and replace it? (^o^) /
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Satisfied satisfaction (*^^*)
I bought it because I wanted something to grab at the time of Tandem (^^)
Bolt hole gapped a bit when stopping Bracket and it took a bit of trouble but I attached it safely (*´-`)
View detail
I think that it is not strangely different from OEM..
Buy with Camera and Handlebar vibration so much.
Compared to OEMWeight it is small so use it in combination.
- Picture 3 (6mm) Picture 2 is attached to the Screw part remaining in the Bar End used this time (8mm) Attached to.
Camera's blur is still alright - - (Camera performance?)
Handlebar vibration seems to have decreased..
The appearance is good, but the end of Repair Parts (resin) Where is the ordering place for? - -
It's a mystery..
View detail
Expensive.
I'm fascinated by the design, high.
Although it seems that only Soko can be purchased for a part that is easily damaged, even if it is..
OEM and Universal, Large I like that there are types.
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA MT03, YAMAHA MT03
Unexpected Large thing Radiator core guard
Fins of RadiatorCore are pretty crushed so easily that they collapse unnoticedly.
I think that SmallEngine Displacement Volume, this high speed Motorcycle is an important issue so much.
YZF-R25 / 03 common with MT-25 / 03 Unfortunately Core guard is not common because Shroud is attached.
I searched for quite dedicated items and tried installing the product of Liteya here.
It is easy to install
- Quantity attached to Core : Pair (for Left and Right) Remove 4 Bolt
Core → Shroud → Spacer → Core guard → Bolt
Just tighten in order.
Core itself is quite soft so you need to put Bolt straight and tighten it, it will easily blow holes, so be careful and work. Working time itself is about 10 minutes.
I am quite satisfied because the appearance is good and the coloring is also beautiful. I can not Guard everything, but I think whether it is better than nothing.
The only drawback is made overseas (Taiwan?) For me it will take time to arrive? In my case it took a month and a half.
View detail
I tried installing on XJR 1200!
Material that I used so far : Since Rubber's Grip worn out, I searched and found Net looking for a little luxury feeling Grip if you exchange anything!
There was no problem with installation, and even if it says anything it is full of luxury and conspicuousness.
Aluminum's protrusions are caught in Gloves and the effect of throttling Holder is also available (^ ー ^)
View detail
Satisfied if it is a bit cheaper
There is more weight and presence than I thought, I am satisfied with the quality.
It seems that Grip also finishes without incongruity if it is aligned with the same Brand. How about if it is said that it is over the price?
View detail
Very good grips. Comfortable and beautiful, the combination of rubber and aluminum is, in my opinion, a very practical functional solution. The quality of materials is also high, high-quality rubber part and painted with a very durable, shiny and high-qua
Very good grips. Comfortable and beautiful, the combination of rubber and aluminum, in my opinion, is a very practical functional solution. The quality of materials, high-quality rubber part and an aluminum body painted with a very durable, shiny and high-quality paint are also at a height. Installed on a motorcycle Hoda cb 1300 sf sc 40 . Very good gripsy.Udobnye and beautiful, a combination of rubber and aluminum in my opinion a very practical functional reshenie.Takzhe at the height of the quality of materials, quality of the rubber and painted very resistant, brilliant and high-quality aluminum paint on the bike korpus.Ustanovleny HONDA CB1300 sf sc 40. View detail