Reviews
Good visibility.
We chose 4500K because of its longer wavelength and better visibility than 6000K. The power consumption has been lowered from Halogen, and the out-of-ball warning light has remained on. We are considering the need to incorporate a warning light canceller in the future. View detail
Expect high quality and durability
The previous God of thundergu passed away after 6 years, so we replaced it with its successor, the God of thundergu II New Model.
I used Halogen bulbs until the product arrived, but they felt dark at night.
We did not consider other products because we had already confirmed that the previous God of thundergu could be installed without modification and that the optical axis would be produced.
I am a little concerned that the price of II's New Model is set much lower, but I expect it to be as durable as the previous model.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Bright!
The Halogen bulb was no longer working, so I decided to replace it anyway!
I had previously purchased an LED that claimed to be an "explosive light" on the Internet, but it was the exact opposite, being darker than the original and thus useless, so I wondered if this would be the same. I was a little bit nervous about purchasing it and installed it with Tokyo Do Reflector Light and some modifications, but I am happy to say that it is bright and has perfect visibility!
However, I need to note that the OEMGlass Lens Light of the old CUB I tried is not able to secure the Stroke of the LED Lamp - so I need to be careful!
View detail
Easy exchange only!
It is the same shape as the H4 bulbs, so it is just a matter of replacing them.
Light intensity, light distribution, and tint are good.
I can rest assured that the car will pass inspection.
And what about durability?
View detail
Same handling as NORMALH4 sphere
It is the same shape as the H4 bulbs, so it is just a matter of replacing them.
Light intensity, light distribution, and tint are all good.
The car passes inspection and can be used with no problems at all.
Now we just need to know how durable it is.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
The total length is long, so make sure to check in advance.
[How is it used?
The Headlight Bulb of the LITTLE CUB that was given to me was out of order, so I searched for a replacement bulb to brighten it up.
Was the one you received as per Image?
A little longer overall than I thought?" I felt that the LDE sphere is like that?
The product was generally in line with the Image.
How was your experience with it?
I immediately replaced the OEM bulbs and PonLEDs that had gone black due to bulb failure and checked the headlight from the front, and found that it was close to the lens side of the headlight (not hitting the Lens, but the Clearance was about 5mm).
I did the work without checking the Instruction Manual & notes on the back of the Package due to my bad habit, but the back of the Package has a *Not available for MONKEY, APE, and SUPER CUBSeries. (Electrically not compatible with FI (Injection) Spec. cars of these models. (Also, carburetor spec. cars cannot be installed due to their dimensions. It was firmly stated.
LITTLE CUB is Material:I wonder if it was possible to install the plastic Lens because it is thinner than the old SUPER CUB's Glass Lens. However, there is a possibility that the heat generated by the LED bulb may affect the Lens, so we would like to monitor the progress at our own risk (likewise, those who install the Lens should do so at their own risk).
I started the engine and checked the light...it was so bright that I felt sorry to compare it to the OEM (the battery is completely dead, so there is a slight flicker at low rpm...) I am looking forward to driving after the Restore.
[Points to note]
As mentioned above, there are some car models that cannot be installed (for electrical or physical reasons), so do not purchase without thinking, as I did, and make sure to confirm the installation beforehand.
How did it compare to other products?
As for the CUB, I only know the OEM Headlight Bulb and the PonLED (and the PonLED was cheaper than the P7noHalogen bulb), so I can't say too much about the large size, but it is wonderfully bright compared to the OEM lantern light.
However, I will have to continue to check the LEDs in the future, as they sometimes make it harder for my old eyes to see what is in front of me in the rain.
Other items that would be helpful
Point and hang of installation
No difficult wiring etc., and can be installed in the reverse order of how the OEM bulbs were removed.
Large is strong, and it's not difficult.
[ITEMS TO BUY TOGETHER
If you only need to replace the Headlight Bulb, this product alone is Large sturdy (you will need the right tools for the job), but if you also want to replace the Blinker and Dale, you should also purchase products that meet your requirements.
[Opinions and requests to Manufacturer
When it comes to Motorcycle light bulbs, I trust Mats Stripe.
View detail
4500K but closer to White
I bought it to replace the OEMH4Halogen, but it is a ClassicCafe racer style.
Too bright for ContinentalGT650 but the color is too White.
I dare you to use 4300K for your car's fog, but if you buy it with the +200K feeling...
It means that it was White. The visibility has increased and the current consumption has decreased.
Good
Too bad the people who choose to buy 4500K are the ones who are looking for a light bulb color.
View detail
Bright and safe
I use it on a GSX1300R HAYABUSA 08 High beam.
I introduced it because of the limitations of Halogen in NORMAL.
Dramatic change in brightness when driving at night, allowing you to drive with peace of mind.
View detail
Fits: SUZUKI GEMMA 125, SUZUKI TS200R, SUZUKI TS125, SUZUKI DF200E, SUZUKI GS125E, SUZUKI STREET MAGIC 110, SUZUKI TS50 HUSTLER, SUZUKI STREET MAGICS, SUZUKI STREET MAGIC, KAWASAKI Z250FT, KAWASAKI KL250R, KAWASAKI KLR250, KAWASAKI KMX200, KAWASAKI Z200, HONDA XRBAJA, KAWASAKI KMX125, HONDA REBEL, HONDA XL250R, HONDA XLR250R, HONDA FTR250
DR250S requires modification (rmx250 too?)
I found a ph8 ledValve from Pine Stripe and bought it for my DR250s.
I was wondering if I could just snap it on since I saw the same Headlight rmx in the "Compatible Car Models" column, but the product length is too long and the Valve does not go all the way into the back. It seems that I have to cut it down quite a bit. (I thought I could just pop it on, but it's too long and the valve won't go all the way in.)
I wish the ph-8Valve had been designed to be a little more compact since it is often used in off-road vehicles…
View detail
Fits: Others H4 Valve,HS1Valve DC12V lighting Minus common car
Like others, I can't get High beam in 6 months.
The company's HID (55w) and a fan of Halogen for many years. In that vein, I purchased the company's LEDs, which are more expensive but have higher Quality and self-satisfaction
Installation.
Note that the screw for attaching the heat sink of the ribbon is small and easily licked.
Ribbon is deformable to some extent, so if the volume is contained, it will be contained.
Controller and Ribbon are quite Large.
Wiring is thick and does not bend tight.
when using
For brightness, Kelvin is terrifically satisfied.
High beam is about 6 months old, and then it stops lighting up.
Low beam also disappeared after about 200 hours total!
I'm an amateur so I don't know what broke, but it's disappointing because I was hoping for a more durable life than HIDs.
View detail
Brighter than expected. But ProjectorLamp needs attention.
I installed it while adjusting the angle of the pedestal & heat sink after carefully reading the instruction manual. The light is as bright as the low AbsoluteHID. I installed it as specified in the instruction manual, but the light is Heart type, but it illuminates where I want to see in Curve at night, so I think it is OK.
There are some points to note when installing the H9/H11:The Valve must be inserted and rotated to fix it in place. If the base and heat sink adjustment screws are not tightened, the valve will spin inside and will not be removed, and the entire light case will have to be replaced.
Well, 35W was brighter than I expected, so I can replace the low if I like using it.
View detail
Fits: HONDA GYRO CANOPY, HONDA Byte, HONDA MAGNA50, HONDA BENLY50CD50, HONDA ZOOMER, HONDA DREAM50, HONDA ZOOMERX
Hmmm... It's so expensive.
Used for square eye CUB90Custom HA02-180 units.
Replacement for Halogen 30/30W from Pine Stripe. (Light lens is OEM)
It is very easy to use.
The result was, hmmm. Did it lighten up a bit? Did it just get WHITER?
Perhaps it is because the bulbs were replaced with Halogen bulbs rather than white bulbs, but I don't feel a dramatic brightness.
This is to be expected, but I can't see well on wet surfaces, I have to check Switch to see if Light is on.
After all, 6000Kelvin is too WHITE for this level of brightness.
The worst part is light distribution.
If it is illuminated in a fan shape, there is no problem, but it is an inverted V cut~state. It is hard to see pedestrians on the dark night road.
In addition, the center of the image is blurry and dark, and the vision is lacking. It is likely to catch feces or frogs on the country road.
The Up eye is almost unusable.
The low simultaneous light system is not a light system, so it only illuminates the top and may attract cats and dogs.
It's a shame that it even comes with a 2-year warranty.
View detail
Bright despite being fanless
The light axis adjustment to illuminate a wall at a distance of 5m is perfect, and I am large satisfied with the brightness that dispels the preconceived notion that fanless LEDs are dark. All the HIDs and other cluttered auxiliaries that had been used up to now were removed, and the wiring around the front area was also cleaned up. I expect the durability of this product to be large since it claims a long life. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
PONLED PONLED LED Bulb!
I bought this product after looking for a Type LED Bulb that I could simply replace the bulb with.
4.I used it for the headlight of ADDRESS V100 which was converted to 5-inches Bates Headlight. Since the tip of the LED Bulb touches the Lens surface of the headlight, I shaved the tip of the Valve a little and installed it to secure the Clearance.
There are no particular problems with brightness or installation, but it is necessary to pay attention to the size of the light case used and the overall length of the Valve, etc.
It is easy to convert to LEDs by simply replacing the Valve without any wiring work.
Incidentally, it is compatible with both DC and AC.
View detail
Fits: その他 12V car
cheap construction
Very cheaply constructed.
No light when inserted deeply, light when inserted lightly, but wobbly.
Obvious defective product or design error
View detail
I managed to do so, albeit on a tight leash.
SRLucas type7Inch also has
Headlight cover
Depending on the Wiring condition, it will not fit in space.
It is possible. I am a Classic
Because of my supremacy, I chose Halogen's warm colors.
I was also interested in the warm colors of LEDs.
But for some reason, warm colors are not available at any supply store.
It's not on display for a trial…
While the straight white and the middle are on display…
I don't want to pay this Gold amount without checking the actual stone.
I was thinking about it, but I just had the opportunity.
I installed it. if it's 3200k.
It's no match for Halogen, but Limit!
The color was warm, which was a good thing.
I use it as it is.
Is the fit honestly not too much of a strain on Wiring?
A little worried.
View detail
Fits: HONDA BROAD 90, HONDA CABINASTAND-UP90, HONDA BROAD50, HONDA Topic flex, HONDA Topic pro, HONDA TOPIC, HONDA TACT FLUMARK, HONDA TACT STAND-UP, HONDA TACT, HONDA SUPER DIO, HONDA CABINA, HONDA Tact S, HONDA CABINA 90, HONDA DIO CHESTA, HONDA DIO ZX, HONDA DIO ST, HONDA DIO, HONDA DIO SR, HONDA DIO, HONDA DIO SR
The best
It switches between low and high and the light intensity is perfect, so it was the right choice! View detail
If you are in the mood for a trial LED, this is enough.
[How is it used?
I bought this product because the headlight of my commuting estrella is an OEM Halogen and I wanted to get a little more light when driving at night.
ESTRELLA's Headlight Bulb is a type that is stored inside the headlight, so there was a possibility that a type with a cooling fin or ballast attached separately from the Valve would be difficult to store. So we decided to use SphereLight LEDs, which can be used by simply replacing them with HalogenType Valves. There were also better grade SphereLight types, but since the original bulb was Halogen bulb, I chose SphereLight LEDs because I thought it would be more effective just by changing to LEDs and I wanted to pay more attention to the price.
Was the one you received as per Image?
As the product page says, the dimensions are almost the same as Halogen bulbs, and the installation went without problems.
Was the installation difficult?
ESTRELLA's Headlight Bulb Replacement is BoltQuantity on the Both Sides face of the Headlight.:After removing the Lens from the Headlight, disconnect the Connector from the Valve and remove the Bracket that holds the Valve in place. The LED Bulb can then be installed in the reverse order to complete the installation.
As long as you have a Phillips Screwdriver, the work can be done in about 15 minutes.
How was your experience with it?
I could feel the brightness even with the low beam, but when I switched to the waste beam, I could see farther than ever before.
I was concerned about light flickering, etc. since it was used for OEM Lens, but so far I have not noticed anything that would bother me.
[Included Parts:were they on?
LED BulbSingle Body product, so you can't find it anywhere else.
[Was there anything that disappointed you?
Considering the price, it is more than enough for now.
View detail
Easy to install
I was worried until I actually used the product because of the narrow beam coverage and flickering that I saw in the reviews of other products. However, when I tried it, my fears were put to rest. I can drive on roads with no streetlights at all with no worries. The durability of the product remains to be seen. View detail
Bright!
They were replaced with Halogen bulbs, so they are dramatically brighter!
I picked the 4500k and it's WHITER than I thought it would be!
View detail