Reviews
Fits: YAMAHA V-MAX 1200, YAMAHA SR400, YAMAHA SR500, YAMAHA XT500, YAMAHA YB-1
Gasket-like… of carburetor's Manifold.
I thought I ordered Exhaust pipe Gasket but I received something different….
I think this is Gasket on the carburetor side…?
I can't even return it, which sucks.
View detail
Like oem quality
I used these to install the Doremi 4-4 system on my bike. They seem like good quality. Be sure to use a small amount of exhaust silicone to hold them in place before installing header pipes. No leaks after install! View detail
Fits: SUZUKI WOLF250, SUZUKI RGV250 (Gamma), SUZUKI RGV250 (Gamma)
Gasket for Gamma's Flange
[How is it used?
RGV250Γ (VJ22A) This is a gasket that fits into the groove on the outside of the exhaust flange of the
Are you using this mysterious Size Gasket? I thought so when I bought it, but I used it.
How was your experience with it?
I have the impression that it is particularly ordinary.
There are no particular exhaust leaks or problems.
Gasket originally attached (Former Owner replaced) The liquid Gasket should be used in moderation because it took a lot of time to remove it because it had merged into Solidly with a lot of liquid.
How did it compare to other products?
It is a strange Size Gasket with not many other options.
I had no hesitation in purchasing the product because KITACO, a reliable and trustworthy company, had the lineup.
[Points to note]
Not particularly
【Review】
This is a necessary Gasket if you use OEMChamber.
Thank you very much for the lineup of this special Gasket!
View detail
Fits: SUZUKI SKYWAVE650 burgman, SUZUKI GLADIUS650650, SUZUKI GLADIUS650400, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI WOLF250, SUZUKI WOLF200, SUZUKI WOLF125, SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV400, SUZUKI SV400, SUZUKI ST250 E Type
Gamma's OEMChamber requires 4
[How is it used?
RGV250Γ (VJ22A) The new one was replaced with a new one for the ChamberMaintenance of the
How was your experience with it?
This was the first time for Gamma to install and remove chambers, but the description said that 4 chambers were required, so I purchased 4 chambers as described.
One SideQuantity on the Flange side and the Engine cylinder side between the chambers:2pc. I used 4 of them for sure because I need Set.
I installed it with a light Gasket and so far it is working fine with no exhaust leaks.
How did it compare to other products?
It was not particularly good or bad.
[Points to note]
At first, it is difficult to install because the direction of installation is upside down!
It is better to stick with liquid Gasket and replace it. (Large strange to take it later, though).
【Review】
It was cheaper than OEM and functionality was fine.
For OEMChamber, 4 pieces are required, but for external chambers, it is usually Quantity:2pc. Set, or maybe even none.
View detail
Fits: SUZUKI STREET MAGIC 110, SUZUKI STREET MAGIC 110, SUZUKI STREET MAGIC 110, SUZUKI STREET MAGIC 110, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110
KITACO Exhaust Gasket
Exhaust Gasket for ADDRESS V100
ADDRESS V100 that needs to remove the chamber not only when replacing the chamber but also when replacing the rear tire.
Buy Exhaust Gasket Stock because I want to keep it.
I have used KITACO products in other vehicles and think they are reliable.
View detail
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
SR400Exhaust pipe replacement
The texture feels cheap compared to OEM Product, but there are no exhaust leaks.
I thought, "Can't I reuse the exhaust pipe and silencer at least once? However, it is very troublesome to re-install the exhaust pipe and silencer after the exhaust leak is discovered, so we will not be stingy and replace them with new ones every time.
View detail
Fits: HONDA CBR1000RR, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four
When replacing the Exhaust System of CB1100etc!
[How is it used?
When we replaced the Exhaust System, we had to replace the Gasket as well, otherwise it would leak and cause power down.
How was your experience with it?
It is designed for CB1300, but can be installed on CB1100 without any problem.
Of course, the quality is fine and can be used without disposal leaks.
How did it compare to other products?
The cost performance is good because it is cheaper and of higher quality than OEM Product and KITACO's same etc. products.
[Points to note]
Note that if it has not been replaced for a long period of time, it will stick to the Engine side and scratch it if not carefully removed.
To prevent waste leakage, replace the exhaust system with a new one even if it is troublesome.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-12R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-12R
Posh Exhaust Gasket
I used it on my GPZ900R.
The price was low and it worked fine.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
Used to replace CRF250L Exhaust pipe
CRF250L 2023MODEL.
SP Tadao Used to install PowerBoxPipe
It was difficult to remove the Gasket that was originally attached.
After positioning with liquid Gas when installing to prevent them from falling out.
Exhaust pipe installed.
View detail
Fits: YAMAHA TZR50, YAMAHA TZR250R, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZ50, YAMAHA TDR250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA R1-Z
In reserve for Replacement
I bought this as a spare. I will probably purchase more soon! View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
I was prepared, but ….
The Gasket could not be removed and was reused, although it was inexpensive and ready to go. View detail
Fits: KAWASAKI GPZ600R, KAWASAKI Z250FT, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI GPZ250, KAWASAKI GPZ250R, KAWASAKI GPZ400, KAWASAKI GPZ400R, KAWASAKI GPz400F/F2, KAWASAKI KLE250 Anaero, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI ZR-7/S, KAWASAKI ZX-4, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI Eliminator 250, KAWASAKI Eliminator 250LX, KAWASAKI Eliminator 250SE
be too thick
be too thick
Size is not right, so I stopped using it.
View detail
![[Xess] (RZ250 / 350) Exhaust System Gasket](https://img.webike-cdn.net/catalogue/images/2902/1-y-rz250350out_TS.jpg)
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R, YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R
At the time of Chamber replacement
I don't know how long it took to replace the Chamber, so I replaced it together with the Chamber. View detail
Fits: SUZUKI MARAUDER125 (GZ125), SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman
Exhaust System Replacement
Product Name
KITACO KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
Item Number
963-2000005
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
To replace Exhaust System
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
not particularly difficult
How was your experience with it?
There does not appear to be an exhaust leak.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI ADDRESS110 CF11A, SUZUKI ADDRESS V100 CE11A, SUZUKI ADDRESS V100 CE13A, SUZUKI STREET MAGIC 110 II TR110S CF12A, SUZUKI STREET MAGIC 110 II TR110SD CF12A, SUZUKI STREET MAGIC 110 TR110S CF12A, SUZUKI STREET MAGIC 110 TR110SD CF12A
Exhaust gasket identical to the original
About quality and texture The exhaust ring-gasket is of the highest quality, made completely identical to the original, the same texture, dimensions and materials, however, a little cheaper and from a trusted consumables company About the feeling of use Excellent compatibility with the original cylinder, which once again proves the high quality, the ring is strong and at the same time soft, which allows you to achieve a perfect fit of the two flanges and the best possible seal to prevent exhaust gases from breaking past the muffler. After installing this ring, there is not a single drop of oil leaks on the exhaust flange of the cylinder, as well as any fogging Products to buy together An independent product, no additional purchases required Difficulty of installation Easy installation to replace the old O-ring, fits perfectly into place, does not fall out, but is not difficult to install, perfect fit Cost performance and comparison with other products Low cost, high quality, one of best replacements for the original on the market About shipping and packaging Packaged in a simple small package, no damage in delivery, very compact product Any concerns, cautions, or advice when purchasing Just make sure the product is fully compatible with your vehicle View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
To CT110 HUNTER CUB
Installed together with Exhaust System replacement. After the installation, there was no exhaust leakage. Don't forget to replace the Gasket when replacing the Exhaust System. View detail
Fits: HARLEY-DAVIDSON all models of vehicles
without deformation
Large is a great product because it can be used for a long time without deformation, but I think the limit is up to reuse. View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA FZS1000 FAZER
Perfect fit, quality product
cheap and high quality.Excellent functional product. There is nothing complicated about it.Would recommend! Fast shipping as always too. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Cospa is good
Scooter has to remove the exhaust pipe every time we change the rear tire, and we try to replace the gasket each time, but the price of OEM products is high. I have been searching for a more cost-effective product.
This is not a product where you will notice a difference in performance, but because it is a consumable product, it meets the objective of keeping the price low.
View detail
![[Xess] (Z1 / Z2) Exhaust Gasket](https://img.webike-cdn.net/catalogue/images/2902/1-k-z1z2_TS.jpg)
Fits: KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Price increase!
Until now, they have been cheaper than other Manufacturers, but they have been very helpful.
Too bad the price has gone up.
It is a consumable item, so even a cheap one would suffice.
View detail