Reviews
I think that structure is simple and may be solid. Although positioning of a stand is hard to be in fashion at first, if a lift can be carried out exactly, there will also be no totter and it will be stable. Although it wavered with a top board ty
I think that structure is simple and may be solid.
Although positioning of a stand is hard to be in fashion at first, if a lift can be carried out exactly, there will also be no totter and it will be stable.
Although it wavered with a top board type thing and this type, stability and the back were pulled by simplicity without an excessive design, and decided other Ho's impression to be reference.
View detail
Since the first motorcycle to purchase was DR-Z 400S, it was this stand that was found when the the lift stands of an off-road system were looked for. Stepless height adjustment is possible for a pedestal part with a screw thread. Since the lock n
Since the first motorcycle to purchase was DR-Z 400S, it was this stand that was found when the the lift stands of an off-road system were looked for.
Stepless height adjustment is possible for a pedestal part with a screw thread.
Since the lock nut sticks, and it rotates unstably after vehicles have ridden, it does not become precocious.
Raise vehicles vertically and a stand is made hidden, and if a guide peg is applied to a lever, lift up of the time of a jack-up can be carried out alone.
When taking down, a safety lock is removed, and as a lever is raised quietly.
Since the damper is mounted at the descent side, vehicles can be taken down slowly.
View detail
[Buying motive] It is for carrying out spa spa exchange [ for the purpose of the wheel which obtained the spare wheel of -KLX250 (07) and mounted the off-tire and the on-tire, respectively ]. [How to use this product] etc. The round and round time of
[Buying motive] It is for carrying out spa spa exchange [ for the purpose of the wheel which obtained the spare wheel of -KLX250 (07) and mounted the off-tire and the on-tire, respectively ].
[How to use this product] etc. The round and round time of the - pedestal is carried out, and it unites with the height of the car-body lower part in front of a lift.
- After both hands have stood the car body vertically, step on the arm of this product with foot.
- Sack RIRIFUTO also of the KLX of 7.2 kg of dry weight [ of 117 kg ] + fuels exceeded a total of 120 kg can be carried out.
- A photograph is a thing at the time of lift up.
Since the higher vehicle is high, even if it carries out a lift, a rear tire is lightly attached to a ground surface, but the lift of KLX250 is carried out perfectly and it can perform wheel exchange etc.
- When lift up is carried out, even if are and the hook which acts as Locke weights the car body in a lift for a main part with a lift arm by mistake, don't carry out a lift down.
- In the case of a lift down, it has a car body lightly with both hands, remove a hook on foot, and only return an arm.
Since oil, ZUDON and a car body do not get down.
It is touch as SUUU Pons.
[Grading of goods] Are they four stars if it is this price, and a function and the engine performance in - oil?
View detail
I am using it for XR BAJA. It is not XR50 / object for 100 motards as others are also written, and it is a general-purpose article which can be used also for a full-sized off vehicle. Although it wavered with the stand of DRC, since the talk that
I am using it for XR BAJA.
It is not XR50 / object for 100 motards as others are also written, and it is a general-purpose article which can be used also for a full-sized off vehicle.
Although it wavered with the stand of DRC, since the talk that the four-point support by Bar was stabilized from monotonous support was heard well, the stand of J-TRIP was decided on.
It can take up and down without suffering troubles at all.
There is almost nothing also with Grad in the favor of four-point support, and it is very convenient.
However, although it is a case of XR BAJA, a front wheel remains grounding lightly, when it did not take care about the location.
If the back goes up somewhat highly, I will think that it is good.
Although it is not caring since it will be solving immediately if some are well wound around Bar ...
View detail
Although the the lift stands of the company were used before, it was shaky, and since it was unstable although left by OH of suspension, etc. over a long period of time, and I was fearful to it, he bought it in the lift stands. It may be very stable.
Although the the lift stands of the company were used before, it was shaky, and since it was unstable although left by OH of suspension, etc. over a long period of time, and I was fearful to it, he bought it in the lift stands.
It may be very stable.
Since it is with a panel, he carries out a sticker tune by himself, and is enjoying himself.
It has put, and if it is completely like a works machine, it would consider by itself and will be self-satisfied.
View detail
Although it is used for a super sherpa, since the top board is large, lift up can be carried out in comfort. Since neither alignment nor the power which does not need to become so nervous and it breaks in is needed, it uses and there is no stress.
Although it is used for a super sherpa, since the top board is large, lift up can be carried out in comfort.
Since neither alignment nor the power which does not need to become so nervous and it breaks in is needed, it uses and there is no stress.
Anyhow, it is good to be able to raise an order ring simultaneously.
View detail
very easy 笙ｪ height is also changed and it can respond to various motorcycles! since there is no rigidity not much, there are some, but it is seldom problematic -- it is a level! it is recommended -- please try!
very easy 笙ｪ height is also changed and it can respond to various motorcycles! since there is no rigidity not much, there are some, but it is seldom problematic -- it is a level! it is recommended -- please try! View detail
It is used for D-Tracker. When the jack for cars is used for the past, height went up to the maximum and the motorcycle has fallen after all. It considered and purchased in the thing which is stabilized and can do a jack-up. If it uses, sense
It is used for D-Tracker.
When the jack for cars is used for the past, height went up to the maximum and the motorcycle has fallen after all.
It considered and purchased in the thing which is stabilized and can do a jack-up.
If it uses, sense of stability is good too.
Although cared about the jack-up beginning to use, it was able to do in comfort the 2nd time and afterwards.
Moreover, also when lowering after job finish, it is the favor of an oil pressure, and since it gets down slowly, it is safe.
Although it is washing of a troublesome chain, if there is this stand, a motivation will come out.
View detail
A correspondence vehicle type is HONDA. : XR50 motard : Although it is XR100 motard, Mr. Webike is unknown in why such an indication is given. Other vehicle types can also be used satisfactorily and it has become a general-purpose article even in the
A correspondence vehicle type is HONDA. : XR50 motard : Although it is XR100 motard, Mr. Webike is unknown in why such an indication is given.
Other vehicle types can also be used satisfactorily and it has become a general-purpose article even in the maker site.
Since the minimum quantity and a lift amount can adjust with one screw in three steps, it can be satisfactorily used to a full size-off vehicle~motocrosser as well as a motard.
Since it is the simple structure which occurs only by applying weight by the principle of a lever at one shot, it is considerably durable.
Since the support rack is monotonous, the same stand of the other company does not have the quite satisfactory constancy of a motorcycle, but since this is four-point support, it is preeminent also for stability! Since a price is also cheap, it is super-recommendation.
View detail
It is mainly used by XR250. Although it had stands various also in the past, HC2 the lift stands are dramatically easy-to-use. When taking down especially a motorcycle, a damper can be effective and it can take down to a smooth. It is the stan
It is mainly used by XR250.
Although it had stands various also in the past, HC2 the lift stands are dramatically easy-to-use.
When taking down especially a motorcycle, a damper can be effective and it can take down to a smooth.
It is the stand for which it was searching.
View detail
It purchased the other day, it opened and was a surprise. Although it looked quite finely by the picture, since the welded section had not melted fearfully when actually looked at, it was uneasy. Although complete works are welded well and I thoug
It purchased the other day, it opened and was a surprise.
Although it looked quite finely by the picture, since the welded section had not melted fearfully when actually looked at, it was uneasy.
Although complete works are welded well and I thought whether it would be satisfactory in reinforcement, I thought that it was a thing which a manufacturer side will rub and which may have a little checks.
Since he wanted the cheap stand, although it was satisfactory, at the point, it just called it one more from the problem of safety and a design.
I think that they will be satisfactory goods if it can purchase by Kami who understood.
View detail
Since it was too high when it was used for a motard vehicle, height adjustment was demounted. It can be used especially satisfactorily. Although it is natural, if top board rubber parts are stained with oil by oil change etc., splendidly, a motorc
Since it was too high when it was used for a motard vehicle, height adjustment was demounted.
It can be used especially satisfactorily.
Although it is natural, if top board rubber parts are stained with oil by oil change etc., splendidly, a motorcycle is slippery and will sideslip ^^; User-friendliness finds it useful well except it.
View detail
It purchases for the tire change of an off vehicle, chain maintenance, etc. Power is hardly needed at the time of lift up. If weight is put, lift up can be carried out simply. Moreover, since the damper sticks also when taking down, it gets do
It purchases for the tire change of an off vehicle, chain maintenance, etc.
Power is hardly needed at the time of lift up.
If weight is put, lift up can be carried out simply.
Moreover, since the damper sticks also when taking down, it gets down at a moderate speed and is safe.
Although it is somewhat slow to adjust height according to a vehicle type first, there is no dissatisfaction point in particular other than it.
If there is nothing when there is this in maintenance of a chain, effectiveness is completely different!
View detail
It purchased with off vehicle purchase. Although it is a trail and the two-set organization of a motard, it is appreciated that it can deal with both by adjustment of height. Since almost all work will be attained if there is this, it is dramatica
It purchased with off vehicle purchase.
Although it is a trail and the two-set organization of a motard, it is appreciated that it can deal with both by adjustment of height.
Since almost all work will be attained if there is this, it is dramatically found useful.
O with the strong point and a damper -- since it falls slowly, trouble can be prevented.
- Adjustment of height can be performed in analog for a height adjustment screwed type, and the correspondence range is wide.
Moreover, since it can also be made to rotate during work, it is dramatically convenient.
x demerit and a kick arm are likely to be equivalent to a step or a pedal, and it is hard to carry out lift up.
It is quite easy if it is on several more centimeter outside.
View detail
It purchased to xr250. Since it motorcycle-stand-self--object-began and was purchased and used, although a comparison is impossible, it becomes comment below. - The big power of the lift up down itself is also unnecessary, and it is simple for it.
It purchased to xr250.
Since it motorcycle-stand-self--object-began and was purchased and used, although a comparison is impossible, it becomes comment below.
- The big power of the lift up down itself is also unnecessary, and it is simple for it.
- A problem can be made for there to be nothing, if it gets used although setting to a good location worried at first (I think that it changes also with motorcycles).
- A treading-in lever is somewhat short.
In pedals, it breaks in and is hard to carry out.
- A lever opens at the time of storage and conveyance, and troublesome.
Locke in a lever top wooden-clogs state is satisfied as for the time being cheapest stand with a lift needed.
View detail
(1) The person who found the chair (3) off-motorcycle maintenance stand answer only for new style healthy stepper (2) fishing needs to place an order. I think that it probably says mind. carry out appearance main -- although it is like goods -- a
(1) The person who found the chair (3) off-motorcycle maintenance stand answer only for new style healthy stepper (2) fishing needs to place an order.
I think that it probably says mind.
carry out appearance main -- although it is like goods -- a plus driver -- since it is like a 10-mm wrench and becomes natural.
It be elaborate to have bought it first in Webike.
Something is inexpensive.
View detail
It purchased, although an off-road motorcycle is fixed. Since height can be adjusted if a stand is turned, and lift up can be carried out in just right height by any motorcycle, it is convenient. Since the damper is attached and it can take down g
It purchased, although an off-road motorcycle is fixed.
Since height can be adjusted if a stand is turned, and lift up can be carried out in just right height by any motorcycle, it is convenient.
Since the damper is attached and it can take down gently also when taking down, it is easy.
I think that it has and there is no loss since in the case of an off-road motorcycle a front fork and a swing arm can also be removed as well as chain exchange and an order tire change if there is this stand.
View detail
It purchased to maintenance of the off vehicle. If it is this price with a damper, is it enough for a sunday mechanic?
It purchased to maintenance of the off vehicle.
If it is this price with a damper, is it enough for a sunday mechanic?
View detail
Strong at the product made from steel. It will not be stabilized, if there is no weight of this grade in carrying a motorcycle although it is a little heavy. Safe, since there is also a damper and it does not fall suddenly. The best, when intr
Strong at the product made from steel.
It will not be stabilized, if there is no weight of this grade in carrying a motorcycle although it is a little heavy.
Safe, since there is also a damper and it does not fall suddenly.
The best, when intrepid and a price are considered by black.
View detail
Although other maintenance stands for off-road vehicles have many types which put on an even board, since this stand is a type which puts a motorcycle on the pipe around which the rubber cushion was wound, there is sense of stability very much. Furthe
Although other maintenance stands for off-road vehicles have many types which put on an even board, since this stand is a type which puts a motorcycle on the pipe around which the rubber cushion was wound, there is sense of stability very much.
Furthermore, in the case of my motorcycle, when it puts on a stand, and space is under an engine, since an oil change is possible as it is, it is found useful very much.
Incidentally, it is not the red type sold now but the old type white type which I have.
Although the cushion of a rubber came to be [ a dent ] conspicuous, even if it will use it for about three years, and it becomes quite full of dust, it is the recommendation which a motion does not become astringent but I regard as hardly breaking since a configuration is also easy.
The red type sold now is smart...
View detail