Reviews
Just Large size
Too large and it will not have a good parenthesis, but too small and it will not have much effect, so I think the large size is just right. However, if an OEM cigar socket is attached, it will be hit, so you will need to add a spacer to attach it. View detail
OEMScreen is now 8 cm longer.
HondaNC750X (RC90)
OEMScreen is 8 cm longer in shape and has a natural appearance
I am 164cm tall and the wind directly on my face is reduced and touring is more comfortable.
If you are taller or want even more wind protection,
I think it would be the choice branch of Pooch and GIVI.
View detail
It says you can pimp it with Bolt On.
I wanted to replace the screen with a taller one because I am tall, so I chose this one that looks close to OEM and does not spoil the forme.
good
Shape similar to OEM
Some windproofing effect
Easy installation and removal using only a 5mm hexagon
evil
Slightly thinner than OEM, so vibration is a concern
The top two Bolts do not stay in place and rattle when tightened. (RubberWasheretc. must be installed separately)
Bolt under the top and bottom of the car is an OEM Rubber Bush. (Not a Larged work, but...)
Both SIDEs interfere with a part of the car body when not engaging RubberWasheretc.
I think the product itself is elaborately made, but it is not perfect with Bolt On as described in the description. Since there is no shatterproof, it is necessary to return to OEM or install moldings, etc. before vehicle inspection. Inner diameter 8mm, outer diameter 15mm, thickness (about 1 to 4mm, depending on the individual) Washer is necessary. If you are interested in appearance, I recommend Visor, but if you are looking for windproofing, Visor is much more cost-effective.
View detail
I'm satisfied
We changed from OEM's Clear Screen to this Dark smoke screen.
The OEMBolt is used for the installation itself, but because of the special shape of the OEMBolt, even if you do it by force without thinking about it, it will not work.
I think it will need a little HANG because it doesn't fit properly.
View detail
More important for appearance than wind protection effect
I was concerned that the OEM Screen was becoming dull with polishing scratches etc. I was wondering whether I should polish or paint it, and decided to replace it with Other Brand Product.
However, I didn't want it to be too high, so I chose Windscreen by WRS. (Sports Type) Matte Black.
Compared to the OEM Screen, the height is +40mm and the width is +30mm, but I haven't measured it yet, so I can't say for sure, but the height seems larger. 。
I wondered if the fitting would be large and sturdy since it is "Made in Italy". I wondered if the fittings would be strong enough, but I was able to simply pop them on without having to modify the screw holes, etc.
When attached to the vehicle body, it has a higher presence compared to the OEMScreen when viewed from the front, but when viewed from the side, it is long enough to hide the Meter and does not spoil the look of the Touring type Stofire.
However, I believe that the windshield effect is almost nonexistent, so please choose according to the intended use.
View detail
Fits: DUCATI PANIGALE 959, DUCATI PANIGALE 1199 R, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI PANIGALE 1299 R, DUCATI SUPERLEGGERA 1299
Good!
When I lie on my upper body, my head can easily enter the Screen, making it easier to concentrate on opening the Axel and speeding up the Straight. The transparency is high and the installation process is stress-free. I am very pleased with the new look and feel. (Lol) View detail
Windproof effect.
I replaced it with a windproof effect. Installation can be done with a simple push-on.
With the OEMScreen, the wind blowing on the head was large and strong if the height was adjusted, but the wind coming around from the side and hitting the upper body felt strong, and I was concerned about the coldness of the upper body during the winter season. After the replacement, the wind blowing around the head was reduced and the coldness of the upper half of the body was reduced.
I have not tried the middle height, but I have tried the OEMKnuckle guard and the windshield. I have not tried the middle height.
...this time [Color] I used Smoke's Screen for the first time. At first I felt uncomfortable, but it did not interfere with driving in particular, and now I do not mind.
View detail
For Sports and Circuit driving
The shape of the helmet is very good when you are running well because it allows you to see without distortion when you are down, and it covers the helmet.
However, in the touring posture, the wind came to the Income mounting area, and it became a large wind cutting sound generator.
I removed it as if I had leaned forward a bit more, it was the same, and it was just one more step before I could use it for everyday use.
View detail
[Color] The Clear Sensation
[How is it used? daily use
Was the one you received as per Image? Yes
Was the installation difficult? No
How was your experience with it? easily visible
[Included Parts:were they on? nothing special
[Was there anything that disappointed you? nothing special
There is a small gap between the Cowl and the Screen (at the end), so if you put a rubber tape on it like the OEM, it will adhere even more closely.
View detail
Damage Countermeasures
As you wrote, I put this on as a countermeasure to the high price of the Headlight unit if it is damaged.
Now we just need to know how durable it is.
View detail
Fits: BMW R 1200 ADVENTURE, BMW R 1200 GS, BMW R 1250 ADVENTURE, BMW R 1250 GS
WRS Windscreen installed on BMW R1250GS
I replaced it with a windproof effect on the upper body.
Replacing the OEMScreen was a breeze, even with the Handlebar fully locked in place.:Pair (for Left and Right) No bumping into Mirror.
When driving, the wind exposure to the upper body was eased and the Helmet's Wind Cutting sound became calmer.
The "go-go" sound is now like a "shoo" sound.
The screen is thick enough and I have high expectations for its durability. I am looking forward to touring in the future.
View detail
Fits: TRIUMPH TIGER 900 RALLY, TRIUMPH TIGER 900 GT, TRIUMPH TIGER 900 PRO, TRIUMPH TIGER 850 SPORT
Good product
Good product
I am glad I purchased my product from your store
View detail
One size larger than OEMScreen
I was using OEMScreen in the higher position.
I replaced it with a larger one because I have more opportunities to drive long distances.
Even when installed in a lower position, it is definitely larger than the OEM, but I could not tell the difference in windproofing effect in my experience.
If the mounting bracket is set too high, it will interfere with the OEMKnuckle guard.
If it is set low, there is a slight contact with the headlight cowl.
View detail
I am generally satisfied with the product.
I was looking for a high screen because the NORMAL screen is hard to use when touring at high speeds. I bought this product because it is cheaper than the OEM option and seems to offer better wind protection than ODAX.
Installation is very easy. Anyone can replace it. I used it on a day-touring trip the other day.
The key wind protection effect was that the wind was concentrated on the Helmet Visor.
Conversely, there is no wind below this point, which helps reduce fatigue during long tours.
The screen itself is thick and solid, with good precision.
However, be careful if you are changing Handlebar or Lever to Other Brand Product.
Our S1000GT has the handlebar replaced with S1000OEM and the quantity:Pair (for Left and Right) Since the Lever is replaced with Other Brand Product by the Holder, the Quantity:Pair (for Left and Right) Both interfere at full lock.
View detail
it's the best
Since it is used in Circuit. [Color] I only use Clear, but the lack of distortion in the field of view and the durability with Single Body is amazing.
It will not break even if you step on it while it is removed.
Unless you polish it a lot, there will be very few scratches.
If I may say so, the part below the Meter is the same as other Manufacturers. [Color] I would like to see it colored with Smoke or Black.
That is the only Minus because you can see the Reverse side of the Meter.
Others durability, shape, and visibility are beyond reproach.
View detail
Satisfied
[How is it used?
Used for 400X NC47
Was the one you received as per Image?
Wound-proof Laminating is also included.
Was the installation difficult?
Easy to use with a ponzuke
How was your experience with it?
Slightly longer than OEMScreen for wind protection
[Included Parts:were they on?
None
[Was there anything that disappointed you?
[Color] Smoke is not too dark, not too light, just right for me.
There are two holes for airflow, but the drilling process looks a little cheap compared to OEMScreen, but the texture is fine.
I love it
View detail
Exactly, it sticks.
Installation takes no time at all and comes on easily.
What do you think of OEMs?
I can't say how thick it is, because I haven't tried running it as thin, but it looks good.
View detail
I liked WRS.
I wanted to change my screen, and when I saw that WRS screens were on the market, I decided to buy one. I was originally interested in the WRS screen because I knew that a motoGP team was using a WRS screen, and I wanted to try it out since there were no WRS screens around. I removed the stock screen from my CBR600RR by removing 4 bolts and gently pulling the stock screen off, then transferred the stock well nut to the new screen and (New well nuts are not included.) It took only 10 minutes to install the screen, since all we had to do was hook the tabs of the screen to the cowl and tighten the four bolts. The bolt holes were almost perfectly aligned, so it was not difficult to install. However, there was a slight gap between the right side cowl and the screen, so I am not sure if this is an individual difference or not, but the fit was not perfect. I personally like the way it looks. The height is not too high. I don't feel any difference in speed or usage on the street since it was originally designed for racing, but when not in the upright position, I do feel that the wind has changed where it hits. View detail
Protect effect on highways is quite good
Wind entrainment at high speeds has been reduced compared to OEMShield.
I am satisfied with the reduction of fatigue on long-distance touring.
View detail
I liked WRS.
I wanted to change my screen, and when I saw that WRS made screens were on the market, I decided to purchase one. I was originally interested in WRS screens because I knew that motoGP teams were using them, and I wanted to try them out since there were no WRS screens around. I removed 4 Bolts from my CBR600RR and removed the OEMScreen by pulling it lightly, and transplanted the OEM Well nut to the new Screen. (New Well nut not included.) The Bolt holes were almost intact, so it was not difficult to install the screen, but there was a little gap between the right side cowl and the screen. The fitting was not so good. I personally like the look of the product very much. The height is not too high. I don't feel that there is much difference in speed and usage on the street since it is originally for racing. View detail