R&G Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

R&G Clear all

R&G

30 Jun 2017

Radiator Guard

Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000

Japan User(translated)

5/5

I attached it to a good feeling. I can run with confidence.

In the case of GAS-S1000F, it is troublesome to do so unless you remove Cowl.
Cowl is good after understanding how to remove it with the manual and Net information.

I think that it is easier for the GSX-S1000 without F. View detail

Frame Plug (right side) [Frame Plug(RHS)]

R&G

26 May 2017

Stand Height Bracket [Kickstand Shoe]

Fits: DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Scrambler Classic, DUCATI Scrambler Classic, DUCATI Scrambler Classic, DUCATI Scrambler Icon, DUCATI Scrambler Icon, DUCATI Scrambler Icon

Japan User(translated)

3/5

The angle at parking is standing and it is a nice feeling.

When parking in the side of the road, if the road is a kamaboko type,
The car body as compared to placing it in a horizontal place (Sleeping too much) I will.
When this product is installed, Side Stand becomes about 5 mm longer
A little angle of Motorcycle will occur.
Although it is just a little change, I feel like I can easily raise a single car.

However, I knew it after purchasing, but similar products are on sale in other Manufacturers,
Especially what made by TOURATECH is cool with DUCATI with Logo.

I hope that it will help prevent snagging on lawn such as Camping place. View detail

R&G

11 May 2017

Fenderless Kit■

Fits: SUZUKI BANDIT650(GSF650), SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1200

Japan User(translated)

2/5

Bandit1250 (NAKED) For, Corresponds to all models. is not.

I bought it for Bandit 1250 k8, but when the thing arrives the box is Small Apparently Bracket Only - - -
Since Bandit is a Reic Fender integrated License Plate Bracket, it should be exchanged for every Rear Fender if originally.

Looking closely at the outer box, I returned it because it was a for Naked Model at MODEL after 2010 and still and.

Although I reviewed the thought as if I mistakenly checked the product page, there is description in the item details column after the 2010 formula, but there is description in the column of conformity model is Bandit 1250ALL MODEL, so it is said to be confusing It is a typo..

It is too cheap if the price is with Fender and it is understandable if you think that the product photo is different, but please note those who are considering purchasing with BANDIT. View detail

R&G

03 May 2017

Swingarm Protector[(Shaft)]

Fits: BMW K1300R, BMW K1300R, BMW K1300R, BMW K1300R, BMW K1300GT, BMW K1300GT, BMW K1300GT, BMW K1300GT, BMW K1300GT, BMW K1300GT, BMW K1300GT, BMW K1200GT, BMW K1200GT, BMW K1200GT, BMW R1200R, BMW R1200R, BMW R1200R, BMW R1200RT, BMW R1200RT, BMW R1200RT

Japan User(translated)

4/5

insurance

It is easy to install, but removing the OEM plastic is a bit strange.
You had better be careful not to add Wound around.
There are other products with similar effects, but the price seems to be the cheapest at the moment.

Also I do not want to know the effect as much as possible. (Lol View detail

R&G

23 Apr 2017

Stand Height Bracket [Kickstand Shoe]

Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)

Japan User(translated)

3/5

The mounting accuracy is bad

GSX 1300 R HAYABUSA has a large slope when stopping at Side Stand, so weigh down when raising
I bought it in the summer to prevent STAND from getting into Asphalt.

Mounting is essentially just fitting and tightening 3 Screws.
However, unfortunately it is not possible to enter either STAND or product.
I deleted STAND with Grinder.
Since the depth is small and the STAND does not run even after cutting it, it is impossible to put on the top covering?.
You can not install it unless you cut the depth of the product or cut the back of the STAND to thin it.
I built my own Spacer in between.
Another Bolt was necessary because the Bolt's Length is insufficient with Spacer's thickness.
It may be different depending on the type of car, but I did not buy it if I knew that it was necessary to process this much.
If you are not confident in machining tools or machining, I think that you should ask Shop for installation.

Nice place
- You do not have to take things to lay under STAND in the summer.
- Since the STAND becomes longer by about 5 mm, it is easier to wake it from the time of stopping.

A bad place
- The mounting accuracy is very bad..
- Price is too high.

Others
- For vehicles that are Lowdown by footbed countermeasure, STAND is about 5 mm but it gets longer.
- If there is an Exhaust System on the side where the Side Stand is located there is a possibility of contact during storage.
- It takes a car weight and contacts the ground so it's a bit sad to be scratched (Lol) View detail

R&G

06 Apr 2017

Fork Protectors And Guards■

Fits: HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA HORNET600, HONDA HORNET600, HONDA HORNET600, HONDA HORNET600, HONDA HORNET600, HONDA HORNET600, HONDA HORNET600, HONDA HORNET600, HONDA HORNET900

Japan User(translated)

3/5

Once attached

Instruction Manual is English Version. (It is attached with this kind image - - And this MODEL is not listed)

After installation, there are parts that are diverted with other MODEL or other parts, and Shaft of One Side has a lot of clearance with Axle inner diameter. (Although it can be installed, it is Gap when falling over)

Because there was no other product, I am still using it. View detail

R&G

04 Apr 2017

Exhaust Hanger

Fits: BMW R1200R, BMW R1200R, BMW R1200RS, BMW R1200RS, BMW R1200RS

Japan User(translated)

5/5

SingleSpec. It is necessary for.

Since basically only one person does not ride, when Tandem Footpeg unnecessarily attempted to remove it, the Right Side was integrated with Exhaust's Stay and footpeg.
Search by weibike as usual, find this Parts and buy it immediately.
Since there was inventory, it arrived in one day after ordering.
Easy to install, with only 3 Bolt.
As a comment attached, I am satisfied with being able to change to a slight weight reduction, simplification of car washing and Maintenance, clean Style.
However, although the price was Sale price, I wanted you to cut it to around 10,000 yen.
Also, although it was easy to install it, I would like to have a translation (please enter here Instruction Manual version). View detail

R&G

18 Mar 2017

Bar End Slider

Fits: BMW R1200RT, BMW R1200RT, BMW R1200RT, BMW R1200RT, BMW R1200RS, BMW R1200RS, BMW R1200RS, BMW R1200S, BMW F800S, BMW F800ST

Japan User(translated)

2/5

Sorry new article

It arrived finally in 2 months from the order whether it will be sent by sea.
Although it is brand new, because it was rubbing with the Plastic case of Package all the time,
The paint on the surface looks like a spotted pattern, so it does not look very new.
The accuracy of the installation was not a problem at all, but it was a very disappointing commodity.
Regarding the performance, it is because it is not overturned.
It is about 2 cm longer than NORMAL's Bar End.
Painted surface etc.. It would be better not to order those who care about. View detail

R&G

06 Mar 2017

Radiator guard[Radiator Guard]■

Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000

Japan User(translated)

4/5

It is better than I thought

I did not expect too much precision from prejudice for overseas production, but with the cheapness - - - (Although I think that it is high personally though it is said to be) I bought it. Handling at installation Instruction Manual should have Nut attached to Bolt, but because Nut was not included, we purchased Stainless Steel's Lock nut at Home center and installed it. To install it remove Side cover of Both Sides and Cowl of Left Side and then remove the gold piece of Brake hose View detail

R&G

13 Feb 2017

Spindle Sliders

Fits: YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA XSR700, YAMAHA XSR700, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07

Japan User(translated)

4/5

MT-07 installed in 2016 model

Although there was a statement that it was not attached to the previous Review, it also follows the 2016 type neatly. I was hesitant to hesitate to purchase at the previous review, but I am satisfied with my purchase. It takes a while when exchanging Tire and Chain, but it is better than Motorcycle being tilted up and lifted up. View detail

R&G

12 Feb 2017

Tank Pad

Fits: APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia)

Japan User(translated)

4/5

Ordinary Tank Pad

Purchase to not hurt Tank.
It is an ordinary Tank Pad. Design is neither possible nor impossible nor flashy, so it fits any Motorcycle.
I use it together with Stomp Grip to help improve Hold feeling during Wound prevention & Sports driving.

View detail

R&G

28 Dec 2016

Bar End Slider

Fits: DUCATI Multistrada 1200, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200 Enduro, DUCATI Multistrada 1200 Enduro

Japan User(translated)

3/5

Is it a little Small?

As I got stuck up, the Knuckle guard was cracked so I purchased it because I thought that I could avoid cracking with Bar End attached.

As the purpose is Guard when standing up, it is a difficult point for a little Small.

It is slightly high as Cost performance w
I think that it can not be helped because it is a product that can not be sold quite easily, but at least 2,000 yen will be cheaper.

Incidentally, it took me a month and a half to deliver it from ordering.
Is this the time it took to import. View detail

R&G

08 Dec 2016

Exhaust Protector

Fits: YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA MT-10, YAMAHA MT-10, KAWASAKI ZX-10R, KAWASAKI ZX-10R, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR

Japan User(translated)

3/5

Good for Dress-up

There is also fear of injury in the part where the installation Band protrudes long. I thought about cutting but because it is dangerous extra use.
The Protect part seems to be hard and firmly protected but can not be diverted to others.
It is very good for those who want Impact for Normal muffler. View detail

R&G

06 Dec 2016

Chain Guard

Fits: YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer

Japan User(translated)

5/5

A gem that clears all the goodness of appearance, robustness, goodness of maintenance

Because the OEM resin Chain guard got dressed worriedly, I found this product when I was looking for a good-looking item made of Gold genus.

【What made you decide the purchase?】
I studied about the following regarding Chain guard purchase.
- Robustness of the product itself
- Looks good
- Good maintainability
- Cheap
While checking the look of goodness, I also examined the robustness of the product itself and its goodness of serviceability.
And it was cheaper to compare with Carbon's ones in terms of price, so I bought it for purchase.

【How was it actually used?】
OEM of Material : If it compares with Chain guard of Plastic it will be heavy so vibration etc etc. I was also afraid of the risk of dropping out at the time, but although I have run 3,000 kilometers so far, I can use it without Trouble so far.
However, there is a time when using the STAND and placing the car body strongly with Gun while using it sounds like resonating. OEM's Chain guard is fixed in 4 places, whereas this Chain guard only fixes in 2 places, so I think that it is better to regularly fix the fixed Bolt tightening.

【Mounting was difficult?】
Chain guard installation itself is not difficult.
Rather it may take a bit of time to remove OEM's Chain guard. For OEM Product, BoltQuantity : There are 4 places in 2 places and 2 detachable Rivets in total.
I think that Bolt understands as soon as you see it, but in the case of a running car, Rivet may be assimilating with the dirt on the car body, so it may be a pain to look for a fixed place.

【Please tell me the installation point and hang】
In my case, I fixed it using medium strength Screw lock to fix Aluminum's Bracket and Chain guard on Front side.
Just in case to make sure it is a place that is subject to vibration and something.
Because it is heavier than OEM Product, let's fix it securely.

[Is there anything I was disappointed about?]
It is exactly like making quality like healthy and healthy Large, but unlike the photo on the sales page I have been Shiningly more than I thought and it felt funny.
I think that there is no problem if it is a car model that plants are heavily used, but MT - 09 is finished in a Matte atmosphere comparatively, so I think that it was better if you let me finish calmer a bit more.

【Hope for Manufacturer - Please let me know if you have any improvement points]
Besides wasteful Shiningly finish of finishing, making it robust and inexpensive is not particularly dissatisfied.
I think that it would have been better if possible to have things of Black color.

【Have you compared items?】
- BARRACUDA Chain guard
It was the first candidate because the shape is cool and the color is also calm Black..
But when I looked it up, I decided to fix it only with Bolt 1 pc on the Rear side, so I removed it from the candidates.

[Others]
I could not stand the shining which I eventually did as Shiningly, I gave it to the painter to Powder coat and applied it to the matte Black.
When MT-09 and Stainless Steel burned out colors of this bare color match, only Silver can be thought of.
I think that it is a more selling product if it is two types of Lineup, Silver and Black.
It's not so bad, but it's a product I want to repeat again if it breaks down with some Trouble. View detail

R&G

04 Nov 2016

Fork Protectors And Guards■

Fits: DUCATI HYPERMOTARD1100/S, DUCATI Multistrada 1100/S, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Multistrada 1000DS, DUCATI Monster796, DUCATI Monster796, DUCATI Monster796, DUCATI Monster796, DUCATI Monster696, DUCATI Monster696, DUCATI Monster696, DUCATI Monster696, DUCATI Monster696

Japan User(translated)

5/5

Battle in caponord 1200

Front fork guard made by R & G I received it from the order a month ago.
I was able to wait with peace of mind until delivery was received by e-mail from Wa Big every time the delivery date changed two turns.
Installation is attached with two 13 mm Socket wrench.
Although I noticed since wearing it, the actual thing posted on the product page of WE Big is R & Getc. Design is different.
That's it. (Front, Hand guard, Swingarm) Guards are in line and caponord 1200 is also a good feeling.
View detail

R&G

31 Oct 2016

Bar End Slider

Fits: APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO 750 Factory

Japan User(translated)

4/5

Items that were for aprilia caponord 1200

One good item that you can purchase thanks to searching for a few parts for caponord 1200 and registering as a favorite.
The pattern that Lineup is falling now is ...
Because my car is a foreign car and it is a Minor car I really do not have any custom parts.
It was lucky that I could buy it this time.
It took delivery for about a month, but it was a worthwhile part.
Functionality has a thickness that seems to prevent the injury of the hand guard when falling and there is a sense of security. View detail