Reviews
Buy in stock
I bought it because it was in stock.
I was able to get in to work immediately and fix it.
It would be helpful to have it in stock.
I don't care about the Manufacturer for this type of Parts, so it would be nice if it was easy to buy by Size and Genre.
View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
A perfect grip so far.
I'm surprised at the price.
I found out that ALCAN hands, which is well known for its cables, has released a cheap Grip.
I got it with a bad Moto (just for fun).
In the past, the extremely cheap Grip
It smells like kerosene in re-raw rubber.
No durability and fast cracking due to the generated rubber.
It gets sticky.
Pattern is awkward.
I was under the impression that this product is similar to Honda's RossiGrip, but first of all, the Pattern is very similar to Honda's a.k.a. RossiGrip. And the atmosphere of the Rubber is not too stiff or poor, it looks much closer to the OEM. There is no strange Smell.
This time I used it for Off car (SEROW225). The durability in the future is unknown, but considering the price, it is the best cosmetic.
View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
Grip change of DT50
The OEM Grip is tattered and has been replaced
Be careful not to move the Axel side too close to the Center, as it won't return!
On Off cars, the Grip is uneven, so it's a bit slippery, but I like it.
View detail
Great
Style and quality are both good!
Plating is solid and the welds are clean.
It's not easy to find a Robot Handlebar with this angle.
Recommended for Chopper!
It's cool!
View detail
As long as it's in place, it's fine.
It's in the reviews of others. "Adjust comes loose on the road. It's not likely to come loose if it's tightened firmly in either direction. I've been walking about 100km in the mountains, but it didn't loosen up. It is not loose if you tighten it firmly to either tighten or shrink it according to the shape of Handlebar because I was worried about it. View detail
Large Satisfied!
Cost performance is top notch!
I thought the fabric was a little thin, but the price is so cheap it doesn't matter at all!
It feels fine to use ^_^^
I would buy it again!
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
It is Repeat
The same Grip was worn out for Large, so I replaced it
This Grip is number one for me
I love the design, the feel and the thickness
View detail
Fits: KAWASAKI Z400 (KZ), SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Great pens for your money!
Repair and restoration of my Honda continues! So another order of mine arrived. What can I say for that kind of money, a product of very good quality. Decent packaging, it looks very good, the old ones were immediately thrown away, installed without problems. So I recommend buying. I hope they pass for a long time)) Repair and restoration of my Honda is ongoing! So my next order arrived. What can I say for such money a product of very good quality. Decent packaging, it looks very good, immediately threw out the old ones, installed without problems. So I recommend to buy. I hope it takes a long time)) translated by google translate View detail
The shape of the screw diameter, etc. is different from the general size, so other companies' hoes are not allowed
If you want something with a 90-degrees angle and a shorter overall length
This was the only thing I could find
The Catalogue specifications mentions the mounting points but
I was wrong to think that they wouldn't be using any special sizes in the Banjo adapter
There is no mention of this on the Manufacturer's website
For example, the mounting screw pitch of the Banjo bolt was mentioned or
There are some standards, so I assumed that this Screw would have them, of course
At the very least It can only be used by our own Hose I think we should write
It's a direct part of the safety issue
Next time I'll only trust what is widely distributed
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
The Grip is always this one
When I change bikes, I almost always change to this Grip It is my favorite item There is still Quantity in the stock case:1 Set is kept
■ Design
Overall The Grip of yesteryear not "Modern I have an impression of this If you use it on an old car, you will feel a little uncomfortable One point colors are also available You can choose one and match it with the color of your car
Impressions
It has just the right amount of softness and a slightly thicker grip Thanks to the grooves and softness, I have the impression of shutting out vibrations with just the right amount of salt and hand It also reduces the numbness of the Also, it has good transverse grooves, so it's not slippery even when driving in the rain, which gives you a sense of security
Grip has to be slim! It's not suitable for people who say "I'm not sure I'm a good fit," but it's reasonably priced, so it's a grip you should try at least once
The only weakness would be the durability It's a soft Grip, so it will wear out or shine on the rubber after a year or so if you use it for commuting It can come out The price is so low, though, that I think it's fine to replace it
View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
Don't buy it
It was blubbery and completely unusable
Left was somewhat loose
The Throttle side was scantily clad and unusable
It immediately went to the trash
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500, HONDA CX500, HONDA CX400
It's a great grip!
I installed it on the moped TL125
The throttle pipe is short
It needs to be replaced and installed with a longer one
But the longer it is, the more freedom of grip it gives me
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Easy to use Grip
[Was there anything that disappointed you?
Color:I bought the Sky Blue and the color was not what I expected
Do you have any wishes or improvements you would like to make for the Manufacturer?
If you could make the coloration a little better, that's all I can say
[Do you have any products to compare it to?
domino Domino:Street Type Grip
PROGRIP Pro grip:Super Bike Grip #601
How was your experience with it?
I was using the OEM Grip and replaced it with this one
Very easy to use and a good grip
My only complaint is the coloration
It's good if you like Simple Grip
View detail
Fits: YAMAHA SR250(ALL MODEL), YAMAHA SR125(ALL MODEL), YAMAHA SR400(ALL MODEL), YAMAHA TW200(ALL MODEL), YAMAHA TW125(ALL MODEL), YAMAHA TT250R Raid(ALL MODEL), YAMAHA TT-R250(ALL MODEL), YAMAHA TDR50(ALL MODEL), YAMAHA TDR250(ALL MODEL), YAMAHA TDR125(ALL MODEL), YAMAHA TDM900(ALL MODEL), YAMAHA TDM850(ALL MODEL), YAMAHA SRX250(ALL MODEL), YAMAHA SRV250(ALL MODEL), YAMAHA TW200E(ALL MODEL), YAMAHA TW225(ALL MODEL), YAMAHA TZr250R(ALL MODEL), YAMAHA VINO(ALL MODEL), YAMAHA WR250R(ALL MODEL), YAMAHA VOX(ALL MODEL)
pleasant to the touch
I used to use a cheap Grip I used to use it just for looks, but I got tired of its plastic-like hardness and lack of grip power, and this is the place to get it the After all, not slipping is a Large assumption View detail
Fits: YAMAHA MT-09 14-16, YAMAHA XSR900 14-16, YAMAHA XSR900, YAMAHA MT-09
There's nothing wrong with that
I replaced the XSR900's Handlebar with a 5?Up and 5?Long one It is using without any problem Unknown number View detail
Fits: YAMAHA SR250(ALL MODEL), YAMAHA SR125(ALL MODEL), YAMAHA SR400(ALL MODEL), YAMAHA TW200(ALL MODEL), YAMAHA TW125(ALL MODEL), YAMAHA TT250R Raid(ALL MODEL), YAMAHA TT-R250(ALL MODEL), YAMAHA TDR50(ALL MODEL), YAMAHA TDR250(ALL MODEL), YAMAHA TDR125(ALL MODEL), YAMAHA TDM900(ALL MODEL), YAMAHA TDM850(ALL MODEL), YAMAHA SRX250(ALL MODEL), YAMAHA SRV250(ALL MODEL), YAMAHA TW200E(ALL MODEL), YAMAHA TW225(ALL MODEL), YAMAHA TZr250R(ALL MODEL), YAMAHA VINO(ALL MODEL), YAMAHA WR250R(ALL MODEL), YAMAHA VOX(ALL MODEL)
For Japan Model 5 CYGNUS
The downside is that it's a bit long and needs to be cut
If we had a choice of lengths..
The difference in thickness is obvious as the KITACO RACING GRIP was replaced by the KITACO RACING GRIP Absorption seems to have increased considerably
View detail
Adjustment Adjuster is less than half of OEM
Adjustment Adjuster is not available because the width of the adjuster is only half as wide as it should be
It was not available
In addition, the Manufacturer also reports the current situation from inquiry to the Adjuster's range I inquired about the OEM same or more, but ignored it
ALCAN hands, I'm disappointed in you!
View detail
Nice
Brake hose, Throttle Wire and Meter Wire are now Mesh Replace this too The wire also breaks as the distance increases, so I replaced it My car has over 30,000 miles on it, so I have to get rid of the anxiety factor View detail
I'll never roll over …
When I was in high school, I used to play around with my GT50 as an OffSpec Throttle Wire died on the road, and I lost my Holder to my finger I have memories of wrapping it up, managing to get the Throttle operational, and finally getting home So when I get a raggedy body that I don't trust, I'll be the first to replace this one It's good now (?) It's a memory, but we still want to avoid that, so we're going to have to replace the body that's gone the distance Recommendation View detail
If you choose Mesh for Brake, then you can choose Mesh for this too!
Front brake hose, Rear Brake Wire and Meter Wire At the same time, I changed the meter wire to Mesh to match the brake hose It's not overly assertive, and yet it's still very much a change of pace Recommendation View detail