Reviews
Fits: HARLEY-DAVIDSON Universal
Required for MooneyTail.
I used it on a Kawasaki 250TR Tail lamp (MooneyTail). It works fine, but it interferes with the lens unless you use a short bulb. I bought a regular bulb without knowing it and had to buy a new one. View detail
Safety wire wrap/cutter
I gave a place in my toolbox.It's definitely a luxury item, but I think it's worth it. They make setup very easy and work exactly as you hope. The quality and feel won't surprise you, but they're good for the price. The cutter isn't great and for some reason it doesn't work close enough to the pivot point which is kind of annoying Handles safety wire like a champ, could use cutting edge run all the way to joint, there is a about a 1/2" where there is no cutter but that is nit-picking. Used it on three sets of grips with no issues.cut through the wire fine without damaging themselves, and I expect them to hold up for a long time View detail
Meter Bulb
Meter Bulb went out so I replaced it. View detail
Circuit breaker30A
I have had problems while driving before, so I bought this as a preparation for long touring. View detail
Bullet blinker set/!!
This is a good product that is not sold anywhere else.
The price is not expensive and it seems like a good product to try.
But my motorcycle muffler is interfering and I need to touch the bracket a bit
Still, the work was perfect and it became pretty!
Recommend to others! -------------------------------------------------- -------- It is a good product that does not sell elsewhere. The price is not expensive and it is a good product to try. But my motorcycle muffler interferes with a little bracket. Still, the work became perfect, so it became pretty! Recommended for others! Powered by Google Translator
View detail
turn signal reviews
Like the rear, I bought it while looking for a turn signal with a similar feeling.
The work is not difficult and the overall look is neat and pretty.
The price was not as expensive as expected
If you are looking for a turn signal like this, I highly recommend it.
I love it! -------------------------------------------------- -------- Like the rear, I bought a turn signal in a similar feeling and bought it. The work is not difficult and the whole is neat. The amount was not as expensive as I thought If you are looking for a turn signal like this, this is a strong recommendation. I like it so much! Powered by Google Translator
View detail
Taillight review!
This is the product I've been looking for for a long time!
It's not a chopper or an old school, but I wanted to decorate my bike in a classic way.
It couldn't have been a product I really liked.
The work was easy if I connected it exactly as it was described.
The price was neither expensive nor cheap in my opinion.
I just thought it was a product worth investing in.
I love it!!! -------------------------------------------------- -------- It's a product I've been looking for for a long time! I'm not a chopper, but I wanted to decorate a bike with a classic It was a favorite product. The work was easy to connect as described as described. It wasn't cheap because it was expensive or expensive. I think it was just a product to invest. I love it!!! Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON Vehicles equipped with OEMPoint
6vEnginePoint Ignition Condenser
It arrived as per Image and was installed without any complaints. View detail
I appreciate it in many ways.
As a Tie Wrap, of course, it could be used without any particular problem.
I really appreciate being able to buy per pc so I can adjust my shipping to get free shipping and not have to waste my money on unnecessary purchases!
View detail
It worked for now.
At least it worked for now;
I am concerned about how far it can be used.
I hope it is Large sturdy…
View detail
Fits: HARLEY-DAVIDSON Vehicles with OEM CVCarburetor
When I Rose again for Carburetor setting, …
I took the carburetor apart again for carburetor setting …
The Gasket has been stretched to a larger size and is no longer stuck in the groove;
It is not possible to reassemble the unit after setting it to "Rose".
Unfortunately, it was below my expectations…
I had no choice, so I reused the old one anyway…
View detail
Thanks just for selling Inch Bolt other than Stainless Steel.
Anyway, thanks for selling just one non-Stainless Steel Inch Bolt.
Stainless steel cannot be combined with aluminum due to electrical corrosion problems.
Black dyeing also rusts, so it's great that it's Chrome plating.
Quality is OK, too.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily
buckhorn handle
Delivery is fast too
The packaging was excellent, so it came without damage.
It is difficult to install the handle by burying the wire, but it is difficult to work by pulling the wire out
It's not very difficult.
Definitely changing the steering wheel makes the position itself more comfortable and it's so good.
It's cheaper than other companies and it's so good!
Recommended! -------------------------------------------------- -------- Delivery is fast It also made the packaging excellent, so I came without a wound. It is difficult to reclaim the handle, but it is difficult to remove the wiring. It's not very difficult. Certainly changing the handle, the position itself makes it easier and so good. Compared to other companies, it's cheaper and so good! Recommended! Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Grip review
The price is reasonable and seems to be cheaper than other companies.
Delivery is fast too
The packaging came perfect too! I love it!
The color is nice, but it's a pity that it burns a little.
Anyway, I recommend it!
If you want to make a classic bike, I really recommend it! -------------------------------------------------- -------- The price was appropriate and it was cheaper than other companies. Delivery is fast The packaging is perfect! I like it so much! The color is also good, but it's a pity that the time is a little burned. Anyway, I recommend it! If you want to make a classic bike, I really recommend it! Powered by Google Translator
View detail
Spring is a dented.
The mileage of his beloved 98XL1200C is 108,000 km.
Spring was dented and STAND was hit when laid down a little at LeftCorner.
When I replaced it, STAND returned crisply and improved. I wish I had replaced it earlier.
When replacing, remove the STAND and apply Spring to assemble. Spring will not extend by human power.
View detail
This is a foul at this price.
This Net is foul at this price.
Easy to use and good product
Hook is plastic but easy to hang.
Cospa best
View detail
Parenthesis is better
I like the matte, cheap-looking look.
Large is also good.
One point, it would have been even better if the inside hole was a little longer.
I have it on an unmarked Jet helmet and it is pushed in a bit.
View detail
Fits: HARLEY-DAVIDSON Mainly used for oil lines.
Fuel line, this is the only choice.
Don't use hose, which is quickly altered by UV light, heat, and fuel, and should be replaced when it leaves a clear mark on the clamp. It is still convenient, although there are few opportunities for immediate delivery at Webig due to the spec. on the order. View detail
Large Scale
The ring is slightly large, but I couldn't tell at first.
I hit it pretty hard and got in the middle of it.
Inner Tube is more flexible than before disassembly.
Removed because it was rattling
Comparing the old and the new, it is slightly larger.
Also on Inner Tube
I've tried to match it, but even with the Bush gap closed.
There is a gap between Inner Tube and
It didn't feel right. Something to be sharpened and used?
I could have cut it down and used it, but it was in the process of being embedded.
Narrow with the smell of Fork waste oil in the air.
I didn't get that far in the garage.
The inner sliding surface is also
Despite running nearly 50,000 kilometers.
This new item and the look of it.
It didn't change, so I reused it.
The rattles are gone.
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON V-RODFamily
Good looking and easy to ride.
Installed on a 2021 YAMAHA BOLT Shoulder Bag.
I had to adjust the orientation of the BrakeBanjo a bit, but I was able to install it without changing the OEM wires.
The Position is just right and looks and feels custom at once.
View detail