Reviews
Ideal for camping
DUKE has GIVI 42LSquare Type, but Jig150 has this one.
The brand feeling and texture are not as good, but you can probably buy a large one for 5000 yen or cheaper.
The drawback is not the box itself, but that if you attach it to a daytonacarrier, the tandem rider will become narrower unless you extend the carrier.
Good point.
According to the manufacturer's explanation, the lockable system by simply closing the lid will cause damage to the carrier and other parts of the car. So I tried to push the lock like GIVI once, but it was difficult and annoying.
So, this revived ability to close and lock the lid is extremely convenient!
If you do, don't forget to lock it so you don't leave. (Lol)
View detail
disappointing
The quality is worse than I thought.
I feel like it will be ruined in about 6 months.
It is not recommended.
View detail
Installed on VIRAGO250
Used in VIRAGO 250.
The VIRAGO is not the type that has headlight bolts on both sides, so you can't install it as it is.
Although the windproof performance was not felt so clearly, the desire of possession which wanted the Meter visor of small was able to be satisfied properly.
It depends on the installation position, but in this case, because the edge of the Screen is slightly covered by the Headlight, the light comes out at night according to the outline of the Screen. Although it was unexpected, it is good because it is stylish.
View detail
Fits: YAMAHA Bolt, YAMAHA Bolt, YAMAHA Bolt CSpecifications, YAMAHA SCR950
Screen interferes with Headlight.
This is the third Screen of this Shop.
As usual, I bought the Universal Product, processed it, and thought I would install it.
I bought a bolt SCR for my car model.
The Screen interferes with the Headlight part though it installs according to the manual.
The diameter of the headlight is not correct, I tried to adjust the bracket to see if I can install it but it is impossible.
After all, the same as Universal Product, the Screen part which interferes is processed Cut and used.
If this is the case, it might have been fine with the 3000 china item.
Not sure if it was the wrong part that arrived.
Fork MountingBracket, but this one is about 3 stars. It's not a model specific easy install.
It is about the overseas Other Brand Product in the Showa era.
View detail
chic impression
I installed the Takekawa Pillion Seat on the Rear Carrier, so I introduced this Carrier to load the luggage.
Installation is easy because there are only 4 screws.
I also removed the rear suspension, grease up the upper and lower rear suspension mounting shafts, and retighten them at 1G.
Steel rod welded structure and black glossy paint, subjective, but if the vehicle color is Blue or Black, Carrier will not stand out badly and will give a chic impression.
We also have Seat in Black, so it might be a bit plain.
It has a load capacity of 5kg, so you can install a Large Box. In fact, it is well made.
It's a little bit ugly because the front part is long and it's sticking out from the upper mount of the rear suspension, but it's not noticeable thanks to the black paint.
I've been using it for a while now.
View detail
feel well
[How is it used?
Easier to grip the knee.
Was the one you received as per Image?
It is a pity that the Size was a little smaller than the Image.
Was the installation difficult?
Quantity:Pair (for Left and Right) I wanted to install it on the target and it wasn't easy.
How was your experience with it?
Nice Grip feeling.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Size was a little too Small
Other items that would be helpful
Have Instruction Manual
View detail
nice fits and grips
I made a little bit more effort to stick this pads due to the temperature is low nowdays. And the result is good as i expected. View detail
It's pretty bright.
I don't drive at night, but I put the Fog Lamp on to make up for the light amount of the Headlight. I'm very happy with it. The durability of this product is still to be confirmed, so I gave it 3 stars. View detail
highly effective
I had a feeling of fatigue in my neck due to wind pressure, but after wearing it, it is completely gone and I am Large satisfied. View detail
Great cowl
I have had this cowl on my Z900rs for about 3 seasons now and it has been perfect and looks great. I have been super happy with the purchase and would buy it again. The only reason it didn't get 5 stars is because it was a little to tight to mount and needed to elongate the holes a little with a dremel to get it to fit, I talked to a couple other people with the same cowl who needed to do the same thing. It was a simple fix and its been fantastic other than that. View detail
Required for Top case installation
Because Top case is a prerequisite for commuting fast, I bought Rear Carrier.
There was a lineup of each company, but I chose the WorldWalk company that was not so rugged.
To install, simply remove the Passenger seat and replace the Grab Bar and Carrier.
But in my case, because I worked on Fender Eliminator and LED Tail together, there was a little gap at the side of Tail cowl.
I'll try to fix it in my spare time.
View detail
Knee grip is now outstandingly easy to do.
Unless you are wearing leather pants, the TankSide Fairing of the JC92 GROM is slippery and difficult to grip the knee.
After applying this Tank Pad, there is no slippage and it is very easy to ride.
It's hard to believe that just by installing a small item like this, you can drastically change the rideability of a motorcycle. (Sorry, I'm new at this.) 。
It is easy to install., It is a great and effective Parts.
View detail
Comfort will be much improved.
[How is it used?
Mainly used for city driving.
Was the one you received as per Image?
It was much thicker than I imagined.
Cushioning is also high and soft Material.
Was the installation difficult?
It is very simple to degrease the mounting part and stick it on.
However, since the sticking part is curved, it is necessary to stick it slowly while removing air from the edge.
How was your experience with it?
It is nominated for the 3rd place in this PartsRanking.
In short, it's very easy to ride.
Grom's body is small, so the knee grip is important for the stability of the body when riding.
This has a large effect on the ride quality.
However, if you don't knee-grip with a lot of pressure in the standard, the Cowl will slip because it is smooth.
It requires quite a bit of tread, especially with sudden acceleration and every breaking.
This product has very high grip performance, and by installing it, the knee grip became much easier.
The knee grip works well with a little force because it is thicker and less slippery, making it really easy to ride in town with lots of stop and go.
I'm glad I installed it.
[Included Parts:were they on?
Body only.
You will need to degrease it before installation, so you will need something to degrease it.
You can degrease it with Alcohol or (It's not good for the Body). It needs to be degreased with Parts cleaner or similar.
[Was there anything that disappointed you?
I was under the impression that since the Material is like Sponge, it would not be very durable.
It's a place that gets scraped frequently, so depending on how you ride, I suspect the surface will start to fall apart in a year or two.
I also got the impression that the price was high for the Material.
If you're looking for durability, I think you'd be better off with a STOMPGRIP Traction pad or something similar.
View detail
Fits: SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650
I'm not sure about the weather.
Grip feeling is very good in thick Tank Pad, but the weather resistance to rain, etc.
I think the evaluation will change in the future depending on what it is like.
I put it on and drove 500 miles on a sunny day and I'd give it 5 stars at this point.
View detail
Great anti-slip effect when knee-gripping Large!
After cleaning the TankSide Fairing with WetTissue, peel off the peeling film from the double-sided tape on the back side of the product, align it, and attach it without air accumulation.
While riding, my knee grip was slipping all over the place between the resin surface and my knee, but just by applying this Seat, I was able to get outstanding grip. It's much easier to ride now.
As a side effect, it is claimed to prevent scratches on the fairing surface. "Thick Protection Seat" If it is interpreted as, it will have a scratch prevention effect.
I think it is an excellent product.
View detail
The release paper was awfully hard to remove.
Tank Pad and Knee Grip Pad are Quantity:I think it's attractive that it's a Set and that it's Exclusive Design with good fitting.
I bought it again because I had used it before for about 2 years for another car model and the surface was a little worn and it seemed to be durable, but this time the release paper was very difficult to peel off and when I thought it was finally peeled off, the adhesive side came off from the body and I was upset. (I could have said defective).
In addition, as for the Tank Pad, the area is wide and the protection performance seems to be very good, but I do not think that the design is good because it is too large.
For this reason, I prepared a different Tank Pad.
View detail
Cannot be installed. Cannot be used.
After I received the product, I tried to install it at a later date, but I don't know if there are different screws in the parts or what, but anyway, the screws are not tightened or fixed. The screw keeps turning. When I looked at it carefully, I found that there were only 4 screws in it and no parts to fix it, and there were only holes in the body.
What's going on?
View detail
Good product
I think this product is worth more than the price, and I have a better feeling about the make and the price than selling it at a higher price by emphasizing the Brand name. View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300
It is easy to install.
Installation is extremely easy.
If the ETC Wiring is done properly, it can be installed in 10 minutes.
The dissatisfaction point is a little rattling because there is some rattling in the body and the lid part of Case.
I put it on my wife's Rebel, and I put Tape in the gap at the Level that I don't mind at all while driving.
The price is right for this type of product.
View detail
Handmade？
I wore it on my old Grom Initial Model.
I remember buying it because of the low price.
My first impression is that you're an amateur with a heated Acrylic plate and plastic surgery?
Visor is Quantity:Pair (for Left and Right) It was an asymmetrical piece of shoddy work.
There is almost no windbreak replacement, and the lack of proper shaping in VisualUp Objective Items is fatal.
I don't know about the current products, but because of this, I personally don't recommend the Manufacturer here.
View detail