Reviews
FOGWIN
My impression of wearing it on SIMPSON's RX-10 is that it gets stuck when opening and closing the Shield. I think this takes some getting used to, but I didn't mind it too much. I think this is something you have to get used to, but I didn't mind it too much. View detail
Fits: その他 A-FORCE RS JET, その他 G-FORCE-SS-JET
It will be stronger as a helmet, but… it will also be more durable.
When fitted, the helmet becomes stronger and more secure when touring at faster speeds.
However, when installed, the Visor part is wide and provides good visibility, but the chin guard is too low and the top of the nose guard comes under the nostrils, which is very bothersome while driving. As a result, I have to remove the nose guard when I wear it, and I think the Visor fogging up considerably in winter. I am not particularly large, nor do I have a passive mouth, so I am sure there are many people with this problem.
This is a recommendation for those who consider strength and safety to be the purpose. On the other hand, it is not a recommendation for those who consider the prevention of fogging and appearance of the Visor to be important.
View detail
Shield is short
Overall, it is a nice Helmet, but the Shield is short and the Glasses sometimes stick out of the Shield. View detail
Stylish and Reasonable
The price is low for an off-road type helmet with a shield, and the quality is quite good.
The exterior design is uniquely unique and cool, and the overall quality is high, including the interior.
Fit is good once on, although the opening is a little narrow and tight when putting on and taking off.
On the other hand, the Shield is poorly made. The Chin guard part of the helmet is pointed, and the Shield itself is also pointed, and the Shield is also curved to match the shape of the tip of the Shield, The Shield cannot be used in the middle position, and can only be fully opened or fully closed.
In the city with a lot of Go & Stop, at low speeds, and on forest roads, I want to get ventilation, so I open it all the way, but if I try to use the Inner Visor to protect my eyes as well, this is very dense. [Color] Smoke, and I can only use it under the hot sun in the middle of summer. I have tried to use Inner Visor of Option "Rainbow mirror", but it is troublesome to switch between Shield and Inner Visor, and it is very confusing.
Goggles can be used, but there are very few types of Goggles that can be used, and at the moment, I use neither Inner Visor nor Goggles, and I always use Clear work Glasses in combination in case I need to open the Shield fully.
Ventilation is included, but I don't think it is very effective, and the helmet itself is a bit heavy.
For those who value Parenthesis quality and don't care much about features...?
View detail
What do you think of the price difference with OGK….
Some may be confused by the fact that OGK, the Rival in this price range, has repeatedly raised its prices, and the price gap between this product and the Rival has narrowed.
【It was good point】
And, best of all, it's lightweight.
Fluffy interior
Complaints.
Concerned about the durability of the Bench Parts in the back of the head.
The length of the Inner Visor is said to have been improved, but it still feels shorter than the EXCEED.
The feel of the interior is likely to be a matter of taste, and I feel that I would prefer to be covered a little more tightly.
I guess the product choice will depend on how much priority is given to mass and Graphic model design.
View detail
Difficult to detach and obtain
The base is held in place by a magic tape, but it is so far back that it is difficult to remove and must be pulled to the point of tearing.
As is the case with all HelmetParts these days, it was hard to get them in stock and I had to wait more than 6 months for them;
View detail
Light and not bad quality.
It was good point
*Chin guard can be mounted separately to provide a full face with Jet visibility and is easily removed
It's not as stiff as you'd expect, but it's better than nothing, and when used with the Neck warmer it keeps the cold air out.
*The interior's rather solid.
*Design is cool
*Register your product and get a free Pin Lock Seat!
A bad point
*The Shield is quite hard to open and close.
*It's also pretty hard to install.
*Ventilation is not nice.
*When the Chin guard (sold separately) is installed, the mouth is quite suffocating because air is considerably caged (There is no Ventilation of the mouth)
*That makes it quite cloudy. (That's why I'm so happy with the Pin Lock Seat)
*Although there is a Speaker mounting space, the groove is shallow, so it interferes with the ear unless it is thin.
View detail
very good
I've installed it on my OGKCUBtShoeoma.
It was a Review like Pin Lock Seat itself is not good or Pin Lock pin is broken.
I am also satisfied with the fact that the anti-fogging effect is preeminent and can be reapplied if it fails.
View detail
Parenthesis is good, but...
The texture and functionality are good, but it's very small.
I wear it with a Shoei Helmet XL, but the entry is too small anyway.
It does go in, but I thought my ears were going to tear off when I put it in.
When I wore it, it didn't hurt my temples or anything, but my cheeks were chapped.
The mouth is quite roomy and comfortable.
But anyway, the entrance is narrow.
So I went with Minus2.
The design is good for parenthesis and the atmosphere changes depending on the visor, but the mouth of the head is good.
Personal Thoughts.
View detail
The durability of OEM Product is too low!
The Helmet is supposed to have a useful life of 3 years, but it fell to pieces in about 2 years.
When I bought it, I thought it would fit from the shape, and X-ROAD was described as a compatible model in Package though X-ROAD was not in the compatible model in the Site of Webig.
It's an OEM Product, so it's not as good as it could be.
View detail
Sound quality is good. For people who really listen to music and other things wired.
The aim of this product is to buy a compatible Microphone and Quantity:The Set was where you might be able to make line calls through your phone and so on.
As a result, the communication delay and volume did not go up well, and I gave up. As a result, it was not useful.
However, the sound quality is good as the performance of the product Single Body, and the device that Jack can make a difference. (Smartphones and Walkman.) You can enjoy music on the wire if you have
If you don't need a communication device such as Income, and if you prefer wired instead of wireless, I think it's a good buy.
But I'm worried about whether to fix it to the floor or not, because it's hard to handle and you have to take it off from the device when you take off the Helmet. It is difficult to take off the Helmet when I take off the Helmet.
It is important to note that.
View detail
Good for the price, but is the Visor distorted?
The Fit feeling was right in my head.
The wind cutting sound is quite loud. When you open the frontal inlet "Go. And when it closes. "P It's like that. But I didn't understand the Ventilation effect very well. You won't mind if you think it's like this.
The best part? I feel that the side of my vision is distorted.
Individuals, individual differences? There may be such things as the following, but I used it hard for about a year and couldn't stand it, so I bought a new one.
View detail
My skin feels different!
I've been using the ultra-lightweight CarbonHelmet for five years now
I've been using it while washing the interior, but it's time to replace the interior
I bought a Cheek pad from Webike and replaced it, but the surface that touches the skin Material had changed
The color used to be all red, but the parts that have changed are now gray
I was able to put it on with no problems and it felt good when I put it on
It's nice to have a new interior that feels like a brand new Helmet
View detail
I bought it as a backup, just in case
At the end of the year, I purchased a WINS X-ROAD COMBAT and used the included Postcard to enter the I received a free Fogwyn Plus
I need to remove the Visor, Shield to install the fogwins, and various Screw is Material for better Visor attachment:Because it has been written that it is weak with Aluminum, it is a spare Repair Parts I ordered it as
I couldn't find the Coin driver, so I ended up turning in a $500 coin, but In the end, I was able to do it without damaging Screw
So I had to keep it as a spare
View detail
Look and functionality ○ , The quality is △
It is SHOEI head, but it was the only one in the head of WINS Helmet so I bought it for purchase.
(Other than that, because temple hurts at the moment of attachment)
One year and four months after purchase, the Inner Visor did not move during Touring, and when I confirmed, foam Styrene was detached from the cap and it was Gap.
After returning home it was removed and confirmed that the construction of the glue was complicated and only two points adhered in the area of ??the fingertip.
View detail
Not suitable for Off-Road Helmet?
Helmet attached to wins x-road.
There is no particular inconvenience about installation.
I think it is because it is an off-road helmet, but I hear a lot of noise because of the Wind Cutting sound.
Is it possible to hear without a full face helmet?.
View detail
Satisfied with weight
I am not tired even if I wear it for a long time.
Currently in use, especially without problems.
I bought XXL, but I feel like I'd be a little bigger.
Use spirit to eliminate eyeglasses on running water.
Although it is System helmet, because of the uneasiness of making opening and closing parts,
I do not know about durability.
View detail
It's a good price..
A. Merit
- Manufacturer's attitude is good
I can store it under the Seat of each company Scooter or make a conformity chart and publish it on HP is GOOD! I am the first Motorcycle - Initial Helmet, since it could not be confirmed actually, it became Large change reference. Even cars not in the conformity table seem to be able to check if they re Quest.
B. Disadvantage
- Low texture of each part
(1) Inner Visor in and out "Gakutsu!" Suddenly coming out, I feel a little slippery. However, if you manipulate it by putting effort, the dilemma that the damage is scary - - -
(2) Crown vents and Chin guard (* Sold separately) The roughness of the construction can be seen in various places such as BALI in the mouth of the installation, Gate trace of Shield base.
(3) Why was the dust accumulated on the uneven part of the cap body, such as Manufacturer logo and the installation base of the vent, even though it should be a new product?
C. Others impressions
(1) It is a personal feeling, but XXL of this MODEL is Size which is close to XL of JCruise of SHOEI. When purchasing a product of this company, it seems good to look at Size + 1 of Large Hand Manufacturer. * Of course it is most certain to try on before purchasing.
(2) Although it is the effect of Ventilation, it is not realized yet. Even though it runs on a congested road, it seems that there is an effect around Large and not steaming - - - I will add it again.
D. General review
Half price of JCruise, half quality. It is such a product. If it is the same 125cc environment as me, there will be no special deficiency in use. If you are in the Motorcycle of more Engine Displacement Volume, I think that it is better to consider more expensive products.
View detail
I want the texture to be better.
I purchased it because I accidentally damaged Shield base when I exchanged Shield.
Although it is easy to install, the texture is cheap, as dictated by the previous one, it can not be said that the durability is also high in flattery.
It is a fixed part of Shield, so I'd like you to raise the precision of the part where the shield's nail is plugged in particular.
View detail
A Speaker is attached in a Helmet, and music can be enjoyed even if it has ridden on the Motorcycle, if the music player of a stock is connected. The Helmet which it is using is a Fighter series of a peach Design. Although it was attachment, attachmen
A Speaker is attached in a Helmet, and music can be enjoyed even if it has ridden on the Motorcycle, if the music player of a stock is connected.
The Helmet which
it is using is a Fighter series of a peach Design.
Although it was attachment, attachment was not started with half a sum, thanks to that the Speaker carried out the Just fit to the portion (it has become depressed) equivalent to which an ear is exactly, and a Magic tape.
I think that an inner package is removed and attached and it becomes things if it is a common Helmet.
I think that the Type to which an ear like a Half helmet has come out of a Helmet probably cannot be attached.
About
tone quality, I think that it is good.
I thought that sufficient sound volume had come out of a run of a general road, and even if it used the maximum sound volume, there was no sound crack.
That [ one's ] was OK although I thought that it changed with Helmet form about the leakage of the sound.
View detail